Tender For Making Illumination Arrangement And Mise Works At Amrargarh And Adjacent Water Supply Scheme Ausgram-Ii Block Under Central Mechanical Division P.H.E. Dte. Purba-Bardhaman. Sl. No. Item Description 1 Supply & Delivery Of Following Materia, purba-West Bengal

tender for Making illumination arrangement and mise works at AMRARGARH and adjacent water supply scheme ausgram-II BLOCK under Central Mechanical Division P.H.E. Dte. Purba-Bardhaman. Sl. No. Item Description 1 Supply & delivery of following materials at below mention sites :- 2 GRP street light pole in conical shape using thermoset resign having minimum 65% glass content with following specifications :Length – 7 mtr.Top I.D – 85 + 2 mm.Bottom I.D – 176 + 2 mm. Thikness – 5 + 0.5 mm. Type – Non buried (above ground)The above pole is provided with suitable size MS base plate, foundation bolt & nut set, internal junction box & MS ring arm[Make -Fibro Plastichem / EPP/ PHE approved](Test certificate will be submitted at the time of delivery) [Installation will be done based on the site condition] 3 16 sq. mm 2 core 1.1 KV grade XLPE insulated Al. armoured Cable conforming to IS:7098 (Part-I) 2011 with upto date amendments. [Make- Gloster/ Mescab/ Currency/ Crystal/ Polycab/ PHED approved Make] 4 100W LED flood light luminarie with IP 65 protection.[Make: Philips (Type- BVP)/ Havells/ PHED approved make] 5 40W LED Decorative Post top for 3600light with IP 65 protection for gate light. [Make: Havells (Type- RUBYPT40W) / Philips/ PHED approved make] 6 GRP street light pole foundation work : 7 Making RCC foundation (as per drawing & measurement provided by GRP Pole manufacturer) for pole erection by using suitable reinforcement & concrete grade M20 inlcuding making provision looping cable line, excavation & refilling of earth pit with shifted soil & ramming properly as per specification & direction of EIC . 8 Al. ar. Cable laying work : 9 Laying of one no 16 sq.mm. PVC Al. Ar. cable in underground trenche 460mm. wide X 760mm. average depth, with brick protection on the top of the cable with 8 (eight) nos. bricks per mtr, including filling the space between the brick & cable & also the trench with shifted soil, levelling up & restoring surface duly rammed. 10 Laying 16 sq.mm. PVC Al. Ar. Cable through pump house wall including supply of sockets for clamping and grouting the above cable in each pole foundation (Approx 10 mtr length) 11 Supply & delivery of outdoor type Kiosk box (Size: 10x 6x12) with suitable gauge M.S. sheet along with hinged type front door with locking arrangement including M.S leg angle frame covered consisting 3 way Aluminium busbar 63 amp. fixed on a Porcelain material and grouting its legs in rick piller. 12 Installation of above supply Kiosk bok (item no.-3, c) and making brick/PCC foundation (Size: 14x 10x 18) with supplying bricks/stonechips, sand, cement etc including plastering and neat cement & making electrical connection complete as per direction EIC 13 LED set fitting & electic connection work : 14 Supply & drawing of 2 X 2.5 sq. mm and1 x 1.5 sq. mm (for earthing) FR PVC insulated 1.1 KV grade single core copper cable (PHED. approved make) from pole junction box to LED fixture at the top of the pole and making electrical connection complete 15 Erection of GRP pole on RCC foundation with help of MS base plate, foundation bolts, nuts, washers etc. and fitting & fixing of four (4) nos. flood light luminaris on pole ring arm with necessary inter connection and jointing of cable and testing complete of entire set as per direction EIC 16 Supplying and fixing GI/PVC water proof type looping cable boxof required size comprising with one 250 volt, 15amp kit kat fuse unit, one NL on porcelain insulator with locking arrngement fitted on brick wall with proper clamping arrangement for gate light 17 Fixing outdoor type gate light fitting on gate with supply upto 50 mm dia GI pipe as required length and making electrical connection by Al. armoured cable from loop box to light fiting (without controlling switch) laying over CC foundation including clamping & other necessary materials required to complete electrical connection. 18 Earthing of Loop Box by spike earhing (20mm X 2 mtr.) with drawing 8 SWG GI wire as per IE rule. 19 Supply & fitting G.I angle with wire net fencing arrangement for Gate light 20 Supply & fitting fixing 16 Amp. SPN MCB (Make-Havells/ Siemens/ ABB/L&T) with enclosure & 16 Amp Piano key type Switch with pvc boxinside the pump house wall and making connectin with supply cable for operating the compund light with supply necessary materials all complete as per direction of EIC. 21 INSTALLATION OF VOLTAGE STABILIZER 22 Supply and delivery at site the following items:(Approve make of P.H.E Dte.) 23 Supply and delivery at site A.C. 3 ph.Oil cooled type Voltage Stabilizer suitable for unbalanced input voltage (Make: AE/Sen & Pandit / Opto Elec. / ECS/Fizi/other Approved Make)a) Input:250-500 V 3ph. 50HZ, 4 wireb) Output, 415V + 1% 3ph.,50HZ.c) Capacity: 25KVA.d) Auto manual switch IS - 9815 (I). e) Raise/lower push Button.f) Single lamps to indicate and limits of input.g) Voltmeter for input and output Voltage. (Manufacturing test certificate should be produced at the time of delivery)h) With U/V.O./V.O./L protection with contractor at output side, input MCB & Ammeter etc. ( TC /GC Needed ) [Installation will be done based on requirement and suitability of the site condition] 24 installation of above stabilizer of item 17 of the foundation including all connection complete, drawingthe cable properly on GI cable tray on the wall /as per direction of EIC along with supplying all necessary item including testing complete. 25 Supply, delivery and storage at site Full Bore Electromagnetic Flowmeter DN 200,Protection IP 68 (Minimum inbuild 20 meter cable,factory potted) ,Full bore type Electro Magnetic Flow meter with smart Transmitter (Volume Flow rate output : 4-20mA HART Output and totalizer pulse output:0.05 cum/Pulse) with LCD 4 line backlit display ,calibration lab as per ISO 17025,Accuracy .5% +/- 2mm/sec,measuring,reference & empty pipe detection electrode with Polyurethane/Hard rubber liner,supply: 24 v DC or 230VAC.[Make-Endress+ Hauser(India) Pvt.Ltd/Approved Make] 26 Magnetic Flow Meter DN80 27 Magnetic Flow Meter DN100 28 Installation of above mentioned full bore electromagnetic flowmeter (DN80) with laying of cable (DEPT.SUPPLY) and suppling of other fixing material all complete as per direction of EIC. 29 Installation of above mentioned full bore electromagnetic flowmeter (DN100) with laying of cable (DEPT. SUPPLY) and suppling of other fixing material all complete as per direction of EIC. 30 Add. GST@18% 31 Add. Cess@1%

Refer document

INR 47300.0 /-

INR 22.91 Lakhs /-