Tender For Withdrawing Damaged P/M Set From Defunct Tube Well And Installation Of Departmental Supply Submersible Pump Motor Set With Supply Of Different Electro-Mechanical Accessories For Sasinara W/S Scheme, Zone-I, T.W. No.- Ii (Replacement Tube Well) , purba-West Bengal

tender for Withdrawing damaged p/m set from defunct tube well and Installation of departmental supply submersible pump motor set with supply of different electro-mechanical accessories for SASINARA w/s scheme, Zone-I, T.W. No.- II (Replacement tube well) under CMD, PHE Dte., Dist.- Purba-Bardhaman. Sl. No. Item Description 1 Withdrawing of damaged 12.5 HP submersible pump motor set from defunct tube well (T.WNo.-II) along with 80 mm dia M.S & uPVC column pipes by necy. arrangement & skilled labour after disconnection of power line & delivery pipe line as per direction of EIC& kept at site. 2 Carrying charges for standby one no. repaired 15 H.P submersible pump motor set from PHE Office (Purta Bhavan) to above mention pump house for installation including loading and unloading complete as per direction of EIC. 3 Supply & delivery of following materials - 4 80mm. dia uPVC column pipe 7.1mm. thick having 70mm. long 8TPI threaded both side with heavy type one socket & O ring biax technology with wiring lock system non corrosive, high tensile having I.S.O. 9001 standard. (Make : Ashirbad/ Oriplast/ Raksha/ Approved Make) 5 i) 10ft. long (3 mtrs) 6 ii) 5ft. long (1.5 mtrs) 7 iii) 80mm. dia. top & bottom adaptor 8 iv) 3 dia. X 5 ft long M.S. (7.1 mm Thick) Column pipe having both side 11 TPI Thread and Socket. 9 4 sq. mm. 3 core copper 1.1 KV grade PVC insulated water proof flat submersible cable.(Make : Finolex/ Gloster/ Mescab/ Currency/ Netco/ Polycab/ Approved Make) 10 Heavy type suitable dia M.S. suspension clamp for above column pipe along with nuts, bolts and washers etc 11 Split type M.S. fabricated tube well cover for 300 mm dia. tube well housing pipe with necessary fitting arrangement along with of column pipe, Air pipe, rope of anti snapping device & cable entry gland etc. 12 Pressure gauge 102 mm. dia and 7 kg. /cm2 range, brass cocks and fitting complete. (Make- H.Guru) 13 Making safety device for above pump by supplying 3 nos. suitable size MS clamp/ MS Cage and 1 dia nylon rope of required length including supplying nuts, bolts, and other materials as per direction. 14 80 mm dia CIDF non rising Sluice Valve (PN-1.0) with flange ends drilled (Make : IVI/ IVC/ Cair/ Hazra/ Upadhya/ Jupitor Engg co.) as per relavant I.S. 15 80 mm dia CIDF single door swing type Non-return Valve (PN-1.0) with flange ends drilled(Make : IVI / IVC /Cair/ Hazra/ Upadhya/ Jupitor Engg co.) 16 Ø3 X 1.0 mtr CIDF Pipe 17 Ø 3 X 1 ft CIDF Pipe 18 Ø 3CIDF Bend 19 Ø 3 Flanged tail piece 20 Ø 3 M. S. Cross 21 Steel Plug, M. S. Nipple, Flange, Nuts, Bolts etc 22 Incresseing the existing tube well Casing height up to a standard level as per direction of EIC. 23 i)For Dia of 300mm. 24 32 mm dia uPVC Pipe (Sch-40) (Make- Ashirvad/ Oriplast/ Supreme/ apprvd make) 25 32 mm dia uPVC Union (Make- Ashirvad/ Oriplast/ Supreme/ apprvd make) 26 32 mm dia uPVC Elbow (Make- Ashirvad/ Oriplast/ Supreme /apprvd make) 27 32 mm dia uPVC Coupler (Make- Ashirvad/ Oriplast/ Supreme /apprvd make) 28 Installation of above pump motor, valves, CIDF, specials etc. with existing good condition 80 mm uPVC column pipes for making delivery & washout pipe line and power line connection to the existing panel etc as required to complete the jobsincluding supply of cable gland, sockets as required for the work as per direction of EIC. 29 Making brick pillar (size- 0.25 x 0.25 x 1 Mtr/Suitable hight) for supporting of valves and pipes with plaster & neat cement finish as per direction of EIC. 30 Making of tubewell foundation (size- 3x 3x 3.5 approx) as per site situation including supply of necessary materials as bricks, sand, cement, stone chips etc. with plastering & neat cement finishing to complete as per direction. 31 Supply & delivery of outdoor type Kiosk box (Size: 15x 9x 24) with suitable gauge M.S. sheet along with hinged type front door with locking arrangement including M.S leg angle frame covered consisting 6 way Aluminium busbar 100 amp. fixed on a Porcelain material and grouting its legs in rick piller. 32 Installation of above supply Kiosk bok (item no.-7) and making brick foundation (Size: 24x 10x 30) with supplying bricks, sand, cement etc including plastering and neat cement & making electrical connection complete as per direction EIC 33 Earthing of kiosk Box by spike earhing (20mm X 2 mtr.) with drawing 8 SWG GI wire as per IE rule. 34 Supply & delivery of following materials - 35 25 sq. mm.1.1 KV grade. 3.5 core Al Armoured XLPE cable conform to IS 1554/7098(part-I) 1998(Make : Gloster/ Havells/ Mescab/ Currency/ Polycab/ Crystal/ Approved Make) 36 Indoor type wall fitted busbar box (Size: 12x 8x 15) with suitable gauge M.S. sheet along with hinged type front door with locking arrangement covered and consisting 6 way Aluminium busbar 100 amp. fixed on a Porcelain material 37 4 long 20 watt LED tube light set white colour (Make -Philips/ Havells) 38 Laying of two nos 25 sq.mm. PVC Al. Ar. cable in underground trenche 460mm. wide X 760mm. average depth, with brick protection on the top of the cable with 8 (eight) nos. bricks per mtr, including filling the space between the brick & cable & also the trench with shifted soil, levelling up & restoring surface duly rammed from pump house to kiosk box 39 Fitting & fixing of indoor type busbar box at inside the pump house wall, Laying 25 sq.mm. PVC Al. Ar. Cable through pump house wall including supply of sockets for clamping and making electrical connection complete upto motor starter 40 Supply and fitting fixing of 45 watt. LED light fixture set[Make: Philips (Type- BRP)/ Havells/ PHED approved make] with 40 mm dia x 2.5 mtr. long G.I pipe bracket fixed on the roof of the pump house with M.S clamp properly grouting including making power connection with supply & drawing 2.5 sq. mm FR grade flexible copper wire through PVC casing/conduit with drawing earth conductor (1.0 sq mm copper flexible wire), S&F of 15 amp switch with pvc board including electrical connection & testing complete as per direction of EIC. 41 Add. GST@18% 42 Add. Cess@1%

Refer document

INR 4600.0 /-

Refer document