Tender For Providing And Fixing Of Open Gym Equipments In Various Parks Of Municipal Corporation Ambala City In Ward No.11, 12, 13, 14, 15, 16,17, 18, 19- 1 Providing and fixing Air Walker with below specifications:- Dimensions (LxWxH) 1100x550x1480mm, fabricated with main post of NB 100mm (G.I) ‘C’ Class Pipe of approved make. ‘U’ shaped main frame of NB 65mm (G.I) ‘C’ Class Pipe. All other pipes of NB 32mm (G.I) ‘C’ Class. (‘NB’ stands for Nominal Bore i.e., internal Diameter of pipe in millimetres), all pipes are powder coated with 80-120 micron thick Akzo Nobel or equivalent paints. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. Base plate cover made of virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness, UV resistant and coloured. Foothold made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. The equipment are fitted with inbuilt limiters to prevent unwanted movements. The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover. High tensile steel with galvanized nut bolts are used for assembly. Equipment must be made and confirms with the approved standards certified by and certificates are mandatory requires in the name of both Tenders act as bidder and manufacturer.1. ISO 180012. ISO 50001:20183. ISO 45001:20184. ISO 14001:20155. ISO 9001:20156. DIN 79000-20127. EN 16630:2015The equipment must accompanied with Test report for Quality, Safety, Durability and Proper Functioning of Equipment must mandatory requires Test report in the name of both Tenderer act as bidder and manufacturer.1. Test Report of SS Nut and Bolts2. Test Report of LLDPE Base Caps for Open Gym3. Test Report of Powder Coating Pipe4. Test Report of SKF Bearing No. 6007-2Z5. Test Report of FRP/Plastic (Fiber Pad)6. Test Report of Welding Pipe (Robotic MIG Welding)7. Test Report of MEK Solvent8. Test Report of Neutrul Salt Spray Test9. Test Report of Breaking Load of Welding Pipe10. Test Report of GI Pipe 100 mm NB11. Test Report of GI Pipe 80 mm NB12. Test Report of GI Pipe 50 mm NB13. Test Report of GI Pipe 32 mm NBTest Report of GI Pipe 25 mm NB 2 Providing and fixing double Sit-Up Station with below specifications:- Dimensions (LxWxH): 1500x1150x650mm, fabricated with main post of NB 50mm (G.I) ‘C’ Class Pipe of approved make. Main frame of NB 32mm (G.I) ‘C’ Class pipe, Leg support of NB 65mm (G.I) ‘C’ Class pipe. (‘NB’ stands for Nominal Bore i.e., internal Diameter of pipe in millimetres). Fixed on its top is back support made of perforated MS sheet of 2mm thickness. All pipes are powder coated using Akzo Nobel or equivalent point of 80-120micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. The equipment to be fixed on ground with concrete of minimum strength M-25 and Expansion Bolts. Once the concrete is set, the equipment is fixed on to it. High tensile steel with galvanized nut bolts are used for assembly.Equipment must be made and confirms with the approved standards certified by and certificates are mandatory requires in the name of both Tenders act as bidder and manufacturer.1. ISO 180012. ISO 50001:20183. ISO 45001:20184. ISO 14001:20155. ISO 9001:20156. DIN 79000-20127. EN 16630:2015 3 Providing and fixing Air Swing in pair with below specifications:- Dimensions (LxWxH): 1150x900x1250mm. Fabricated with main post of NB 100mm (G.I) ‘C’ Class Pipe of approved make. Main frame of NB 50mm (G.I) ‘C’ Class pipe. Handle support frame of NB 40mm (G.I) ‘C’ Class pipe. (‘NB’ stands for Nominal Bore i.e., internal Diameter of pipe in millimetres). All pipes are powder coated with 80-120 micron thick Akzo Nobel or equivalent paints. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. 8. Handle bars are provided with high end quality rubber grips. Base plate cover made of virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness, UV resistant and coloured. Foothold made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. The equipment are fitted with inbuilt limiters to prevent unwanted movements. The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover. High tensile steel with galvanized nut bolts are used for assembly. Equipment must be made and confirms with the approved standards certified by and certificates are mandatory requires in the name of both Tenders act as bidder and manufacturer.1. ISO 180012. ISO 50001:20183. ISO 45001:20184. ISO 14001:20155. ISO 9001:20156. DIN 79000-20127. EN 16630:2015 4 Providing and fixing Horse Rider Station with below specifications:- Dimensions (LxWxH): 1000x600x1100mm. Fabricated with main post of NB 100mm (G.I) ‘C’ Class Pipe of approved make. Main frame of NB 65mm (G.I) ‘C’ Class pipe. Handle support frame of NB 50mm (G.I) ‘C’ Class pipe. (‘NB’ stands for Nominal Bore i.e., internal Diameter of pipe in millimetres). All pipes are powder coated with 80-120 micron thick Akzo Nobel or equivalent paints. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. Base plate cover made of virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness, UV resistant and coloured. Foothold made of NB 25mm (G.I) ‘C’ Class pipe. Seat to be made up from virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness,coloured, UV resistant and environmental friendly. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. The equipment are fitted with inbuilt limiters to prevent unwanted movements. The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover. High tensile steel with galvanized nut bolts are used for assembly.Equipment must be made and confirms with the approved standards certified by and certificates are mandatory requires in the name of both Tenders act as bidder and manufacturer.1. ISO 180012. ISO 50001:20183. ISO 45001:20184. ISO 14001:20155. ISO 9001:20156. DIN 79000-20127. EN 16630:2015 5 Providing and fixing Leg Press in a pair with below specifications:- Dimensions (LxWxH): 1750x550x1600mm. Fabricated with main post of NB 100mm (G.I) ‘C’ Class Pipe of approved make. Main frame of NB 50mm (G.I) ‘C’ Class pipe. (‘NB’ stands for Nominal Bore i.e., internal Diameter of pipe in millimetres). All pipes are powder coated with 80-120 micron thick Akzo Nobel or equivalent paints. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. Base plate cover made of virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness, UV resistant and coloured. Foothold made of NB 50mm (G.I) ‘C’ Class pipe. Seat to be made up from virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness, coloured, UV resistant and environmental friendly. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. The equipment are fitted with inbuilt limiters to prevent unwanted movements. The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover. High tensile steel with galvanized nut bolts are used for assembly.Equipment must be made and confirms with the approved standards certified by and certificates are mandatory requires in the name of both Tenders act as bidder and manufacturer.1. ISO 180012. ISO 50001:20183. ISO 45001:20184. ISO 14001:20155. ISO 9001:20156. DIN 79000-20127. EN 16630:2015 6 Providing and fixing Pull Chair in a pair with below specifications:- Dimensions (LxWxH): 1950x700x2000mm. Fabricated with main post of NB 100mm (G.I) ‘C’ Class Pipe of approved make. Main frame of NB 50mm (G.I) ‘C’ Class pipe. Handle frame of NB 32mm (G.I) ‘C’ Class pipe.(‘NB’ stands for Nominal Bore i.e., internal Diameter of pipe in millimetres). All pipes are powder coated with 80- 120 micron thick Akzo Nobel or equivalent paints. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. Handle bars are provided with high end quality rubber grips. Base plate cover made of virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness, UV resistant and coloured. Seat to be made up from virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness, coloured, UV resistant and environmental friendly. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. The equipment are fitted with inbuilt limiters to prevent unwanted movements. The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover. High tensile steel with galvanized nut bolts are used for assembly.Equipment must be made and confirms with the approved standards certified by and certificates are mandatory requires in the name of both Tenders act as bidder and manufacturer.1. ISO 180012. ISO 50001:20183. ISO 45001:20184. ISO 14001:20155. ISO 9001:20156. DIN 79000-20127. EN 16630:2015 7 Providing and fixing Seated Chest Press in a pair with below specifications:- Dimensions (LxWxH): 1800x700x2000mm. Fabricated with main post of NB 100mm (G.I) ‘C’ Class Pipe of approved make. Main frame of NB 50mm (G.I) ‘C’ Class pipe. Handle frame of NB 32mm (G.I) ‘C’ Class pipe. (‘NB’ stands for Nominal Bore i.e., internal Diameter of pipe in millimetres). All pipes are powder coated with 80- 120 micron thick Akzo Nobel or equivalent paints. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. Handle bars are provided with high end quality rubber grips. Base plate cover made of virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness, UV resistant and coloured. Seat to be made up from virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness,coloured, UV resistant and environmental friendly. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. The equipment are fitted with inbuilt limiters to prevent unwanted movements. The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover. High tensile steel with galvanized nut bolts are used for assembly.Equipment must be made and confirms with the approved standards certified by and certificates are mandatory requires in the name of both Tenders act as bidder and manufacturer.1. ISO 180012. ISO 50001:20183. ISO 45001:20184. ISO 14001:20155. ISO 9001:20156. DIN 79000-2012 7. EN 16630:2015 8 Providing and fixing Arm Wheel in a pair with below specifications:- Dimensions (LxWxH): 850x800x1800mm. Fabricated with main post of NB 100mm (G.I) ‘C’ Class Pipe of approved make. Main frame of NB 32mm (G.I) ‘C’ Class pipe. (‘NB’ stands for Nominal Bore i.e., internal Diameter of pipe in millimetres). All pipes are powder coated with 80-120 micron thick Akzo Nobel or equivalent paints. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. Base plate cover made of virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness, UV resistant and coloured. Seat to be made up from virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness,coloured, UV resistant and environmental friendly. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover. High tensile steel with galvanized nut bolts are used for assembly.Equipment must be made and confirms with the approved standards certified by and certificates are mandatory requires in the name of both Tenders act as bidder and manufacturer.1. ISO 180012. ISO 50001:20183. ISO 45001:20184. ISO 14001:20155. ISO 9001:20156. DIN 79000-20127. EN 16630:2015 9 Providing and fixing Elliptical exerciser with below specifications:- Dimensions (LxWxH): 1200x540x1600mm. Fabricated with main post of NB 100mm (G.I) ‘C’ Class Pipe of approved make. Main frame of NB 65mm (G.I) ‘C’ Class pipe. Handle frame of NB 32mm and 25mm (G.I) ‘C’ Class pipe. (‘NB’ stands for Nominal Bore i.e., internal Diameter of pipe in millimetres). All pipes are powder coated with 80-120 micron thick Akzo Nobel or equivalent paints. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. Handle bars are provided with high end quality rubber grips. Base plate cover made of virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness, UV resistant and coloured. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover. High tensile steel with galvanized nut bolts are used for assembly.Equipment must be made and confirms with the approved standards certified by and certificates are mandatory requires in the name of both Tenders act as bidder and manufacturer.1. ISO 180012. ISO 50001:20183. ISO 45001:20184. ISO 14001:20155. ISO 9001:20156. DIN 79000-20127. EN 16630:2015 10 Providing and fixing Double Cross Walker with below specifications:- Dimensions (LxWxH): 1600x600x1600mm. Fabricated with main post of NB 100mm (G.I) ‘C’ Class Pipe of approved make. Handle frame of NB 32mm and 25mm (G.I) ‘C’ Class pipe. (‘NB’ stands for Nominal Bore i.e., internal Diameter of pipe in millimetres). Foot support frame of 100x50x2.5mm CRC rectangular pipe. All pipes are powder coated with 80-120 micron thick Akzo Nobel or equivalent paints. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. Base plate cover made of virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness, UV resistant and coloured. Foothold made of NB 50mm (G.I) ‘C’ Class pipe. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. The equipment are fitted with inbuilt limiters to prevent unwanted movements. The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover. High tensile steel with galvanized nut bolts are used for assembly.Equipment must be made and confirms with the approved standards certified by and certificates are mandatory requires in the name of both Tenders act as bidder and manufacturer.1. ISO 180012. ISO 50001:20183. ISO 45001:20184. ISO 14001:20155. ISO 9001:20156. DIN 79000-20127. EN 16630:2015 11 Providing and fixing Triple Twister with below specifications:- Dimensions (LxWxH): 1700x1300x1300mm. Fabricated with main post of NB 100mm (G.I) ‘C’ Class Pipe of approved make. Main frame of NB 32mm (G.I) ‘C’ Class pipe. Handle frame support of NB 32mm (G.I) ‘C’ Class pipe. (‘NB’ stands for Nominal Bore i.e., internal Diameter of pipe in millimetres). Foothold plate of made of cost iron of 12mm thickness. All pipes are powder coated with 80-120 micron thick Akzo Nobel or equivalent paints. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. The equipment is fixed on ground with concrete of minimum strength M-25 and Expansion Bolts. Once the concrete is set, the equipment is fixed on to it. High tensile steel with galvanized nut bolts are used for assembly.Equipment must be made and confirms with the approved standards certified by and certificates are mandatory requires in the name of both Tenders act as bidder and manufacturer.1. ISO 180012. ISO 50001:20183. ISO 45001:20184. ISO 14001:20155. ISO 9001:20156. DIN 79000-20127. EN 16630:2015 12 Providing and fixing Rowing Machine with below specifications:- Dimensions (LxWxH): 1280x800x1150mm. Fabricated with main post of NB 100mm (G.I) ‘C’ Class Pipe of approved make. Main frame of NB 65mm (G.I) ‘C’ Class pipe. Handle support frame of NB 25mm (G.I) ‘C’ Class pipe.(‘NB’ stands for Nominal Bore i.e., internal Diameter of pipe in millimetres). All pipes are powder coated with 80-120 micron thick Akzo Nobel or equivalent paints. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. Base plate cover made of virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness, UV resistant and coloured. Foothold made of NB 65mm (G.I) ‘C’ Class pipe. Seat to be made up from virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness, coloured, UV resistant and environmental friendly. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. The equipment are fitted with inbuilt limiters to prevent unwanted movements. The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover. High tensile steel with galvanized nut bolts are used for assembly.Equipment must be made and confirms with the approved standards certified by and certificates are mandatory requires in the name of both Tenders act as bidder and manufacturer.1. ISO 180012. ISO 50001:20183. ISO 45001:20184. ISO 14001:20155. ISO 9001:20156. DIN 79000-20127. EN 16630:2015 13 Providing and fixing Stair Stepper: with below specifications:- Providing, designing and fixing of stair stepper in a combination of pair and a single step of size 1000x800x1400 mm fabricated with main post of 114 mm dia and 2.5 mm thick and rest of the pipe 40 mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Pedals shall be made up of Nylon alloy with rounded edges to prevent any impact on injury and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 8 mm colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer-in-charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movements. All open ends of pipe to be closed by GI / LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolt and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate.Equipment must be made and confirms with the approved standards certified by and certificates are mandatory requires in the name of both Tenders act as bidder and manufacturer.1. ISO 180012. ISO 50001:20183. ISO 45001:20184. ISO 14001:20155. ISO 9001:20156. DIN 79000-20127. EN 16630:2015 14 Providing and fixing Exercising Bar with below specifications:- Providing designing and fixing of exercising bar in pair of size 1800x550x1700 mm fabricated with main post of 114 mm dia and 2.5 mm thick and rest of the pipe 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handles bars are to be provided with high quality grip rubber at top end. Base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 8mm, colourful and UV resistant and environmental friendly. All open ends of pipe to be closed by GI / LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipment on to it and cover with the base plate.Equipment must be made and confirms with the approved standards certified by and certificates are mandatory requires in the name of both Tenders act as bidder and manufacturer.1. ISO 180012. ISO 50001:20183. ISO 45001:20184. ISO 14001:20155. ISO 9001:20156. DIN 79000-20127. EN 16630:2015
