Tender For Rate Contract/ Purchase Of Cane Carrier Shaft With Sprockets Etc., panipat-Haryana

Rate Contract/ Purchase Of Cane Carrier Shaft With Sprockets Etc. Rate Contract/ Purchase Of Cane Carrier Shaft With Sprockets, Mrc Shaft With Sprockets, Belt Conveyor Drive And Non Drive Pulley, Irc Shaft With Sprocket, Bc-01 Belt Conveyor Drive And Non Drive Pulley, Bagasse Elevator And Main Bagasse Carrier Shaft , Cane Carrier Drive Shaft With 03 Nos Sprockets Length Of Shaft- 4200Mm Shaft Size: Ø 280 At Center & Ø 220 At Bearings Material Of Shaft: 40C8, Is 1570 Sprocket Teeth-16 Nos Sprocket Pitch- 200Mm Sprocket Hub Thickness- 200Mm Sprocket Thickness Near Teeth- 35Mm Sprocket Material- C.S, Is:2708, Gr Ll Drawing Should Be Draw By Bidder Before Supply From Actual Shaft Installed In Factory. , Rake Carrier Drive Shaft With 02 Nos Sprockets Length Of Shaft- 4000Mm Shaft Size: Ø 280 At Center & Ø 220 At Bearings Material Of Shaft: 45C8, Is 1570 Sprocket Teeth-16 Nos Sprocket Pitch- 229Mm Sprocket Hub Thickness- 220Mm Sprocket Thickness Near Teeth- 85Mm Sprocket Material- C.S, Is:2708, Gr Ll Drawing Should Be Draw By Bidder Before Supply From Actual Shaft(Lumsum Rate Required)Installed In Factory. , Inter Rake Carrier Drive Shaft With 02 Nos Sprockets Length Of Shaft- 3960Mm Shaft Size: Ø 225 At Center & Ø 160 At Bearings Material Of Shaft: 40C8, Is 1570 Sprocket Teeth-16 Nos Sprocket Pitch- 229Mm Sprocket Hub Thickness- 220Mm Sprocket Thickness Near Teeth- 85Mm Sprocket Material- C.S, Is:2708, Gr Ll Drawing Should Be Draw By Bidder Before Supply From Actual Shaft Installed In Factory. (Lumsum Rate Required) , Prepared Belt Conveyor Drive Head Pulley With Through Outshaft Shaft Length-3500Mm Shell Size- Ø 630 X 2600Mm Face Width- 12Mm Thick Shell Material- Is 2062, Grade A, Shaft Material- En-8 Rolled And Welded, M.S Construction With Keyed Shaft. 12Mm Thk Rubber Lagging With Diamond Groove Shaft Size: Ø 140 At Center & Ø 125 At Bearings , Prepared Belt Conveyor Tail End Pulley With Through Outshaft Shaft Length-3200Mm Shell Size- Ø 500 X 2600Mm Face Width- 10Mm Thick Shell Material- Is 2062, Grade A, Shaft Material- En-8 Rolled And Welded, M.S Construction With Keyed Shaft. 10Mm Thk Rubber Lagging With Diamond Groove Shaft Size: Ø 120 At Center & Ø 110 At Bearings , Belt Conveyor Bc-01 Tail End Pulley With Through Outshaft Shaft Length-2700Mm Shell Size- Ø 510 X 2000Mm Face Width- 10Mm Thick Shell Material- Is 2062, Grade A, Shaft Material- En-8 Rolled And Welded, M.S Construction With Keyed Shaft. 15Mm Thk Rubber Lagging With Diamond Groove Shaft Size: Ø 140 At Center & Ø 120 At Bearings , Bagasse Elevator Drive Shaft With 02 Nos Sprockets Length Of Shaft- 3800Mm Shaft Size: Ø 190 At Center Material Of Shaft: 40C8, Is 1570 Sprocket Teeth-16 Nos Sprocket Pitch- 200Mm Sprocket Hub Thickness- 290Mm Sprocket Thickness Near Teeth- 35Mm Sprocket Material- C.S, Is:2708, Gr Ll Drawing Should Be Draw By Bidder Before Supply From Actual Shaft Installed In Factory. , Main Bagasse Carrier Drive Shaft With 02 Nos Sprockets Length Of Shaft- 3800Mm Shaft Size: Ø 190 At Center Material Of Shaft: 40C8, Is 1570 Sprocket Teeth-16 Nos Sprocket Pitch- 200Mm Sprocket Hub Thickness- 290Mm Sprocket Thickness Near Teeth- 35Mm Sprocket Material- C.S, Is:2708, Gr Ll Drawing Should Be Draw By Bidder Before Supply From Actual Shaft Installed In Factory.

INR 100 /-

Refer document

Refer document