Rate Quotation For Estimate Purpose For Open Gym And Children Park , Item & Description , Air Walker • Area – 1.6Mtr X 0.81Mtr. Safe Area – 1.72Mtr. X 1.06Mtr. • Providing And Fixing Air Walker Made From “B” Class G.I. Pipe. • The Main Frame Of Ø60mm Made From “C” Class G.I. Pipe, And • The Bottom Support Of M.S. Round Plate Of Ø250 Mm & 10Mm Thickness Is Welded At Bottom. • The Leg Movement Frame Is Of Ø40mm Made From “C” Class G.I. Pipe. • The Foundation Used For Fixing Is Consists Of Three Equal Items I.E. 90 Mm Made From “C” Class G.I. Pipe , M.S. Round Plate Of Ø250mm &10Mm Thickness & 25 Mm X 25Mm M.S. Angle Of 3Mm Thickness. • The Footrests Is Made From Frp/C.I./Aluminium Casting Material, Its Sizes Are 130Mm X310mm X 5Mm. For The Support 50 X 50Mm X 2Mm Crc Square Pipe Is Used. • Closing Caps Made From Top Quality Frp Material With 2Mm Thickness. • The Pins Used Are Made Up Of Ø25mm Bright Bar. • The Bearings Used Are “6205Zz” Permanent Lubricated Sealed Bearing Of Reputed Make (Skf/Fag) • High Tensile Steel With Galvanized Nut Bolts Are Used For Assembly. • The Serclips Used For Assembly Are Of Ø25mm. • The Powder Coat Is Done By Poly Urethane & Epoxy Powder With 60 To 70 Micron Thickness. , Back Extension : • Area: 1.4Mt R X 0.7Mtr. • Safe Area: 2Mtr X 1Mtr. • Providing And Fixing Back Extension Made From “B” Class G.I. Pipe. • The Main Frame Of Ø90mm Made From “C” Class G.I. Pipe, And • The Leg Movement Frame Is Of Ø40mm Made Form “C” Class G.I. Pipe. • The Handle Frame Is Of Ø32mm Made From “C” Class G.I. Pipe. • The Seats Is Fitted On The Frame Is Made Up Of High Quality Frp Material Of Size 330Mm X 300Mm Of Thickness 3Mm & M.S. Plate Of Thickness 5 Mm And Size 250Mm X 200Mm Is Used To Support It. • The Foundation Used For Fixing Is Consists Of 25Mm X 25Mm M.S. Angle Of 3Mm Thickness. • The Footrests Is Made From Aluminum Casting Material, Its Sizes Are 130Mm X 310Mm X5mm. For The Support Ø32mm Made From “C” Class G.I. Pipe. • Closing Caps Made From Top Quality Frp Material With 2Mm Thickness. • The Powder Coat Is Done By Poly Urethane & Epoxy Powder With 60 To 70 Micron Thickness. , Chest Press Double • Area: 0.71Mtr X 1.72Mtr. • Safe Area: 0.86Mtr X 2.48Mtr. • Providing And Fixing Chest Press Made From “B” Class G.I. Pipe. The Center Pipe Is Of Ø115mm Made From “C” Class G.I. Pipe., And • The Bottom Support Of M.S. Round Plate Of Ø250mm & 10Mm Thickness Is Welded At Bottom. • The Remaining Frame Is Made Up Of Ø400mm “C” Class G.I. Pipe. • The Handle Frame Is Made Up Of Ø32 Mm “C” Class G.I.Pipe. • For The Assembly Different Bushes Are Used Which Is Made From 50Mm With 3Mm Thickness Seamless Pipe & 50 Mm Solid Bar Is Used. • The Foundation Used For Fixing Is Consists Of Three Equal Items I.E. Ø115mm Made From “C” Class G.I. Pipe, M.S. Round Plate Of 250 Mm& 10Mm Thickness & 25Mm X 25Mm X3mm M.S. Angle. • The Seats Is Fitted On The Outer Frame Is Made Up Of High Quality Frp Material Of Size 330Mm X300mm Of Thickness 3Mm % M.S. Plate Of Thickness 5Mm And Size 250Mm X 200Mm Is Used To Support It. • Closing Caps Are Made From Top Quality Frp Material Which Is Of 2Mm Thickness. • The Pins Used Are Made Up Of Ø25mm & Ø17mm Solid Bar. • The Bearings Used Are Of “6205Zz: & “6203Zz” Permanent Lubricated Sealed Bearing Of Reputed Make (Fag/Skf.) • High Tensile Steel With Galvanized Nut Bolts Are Used For Assembly. • The Series Used For Assembly Is Made Up Of Ø25mm & 17Mm. • The Powder Coat Is Done By Poly Urethane & Epoxy Powder With 60 To70 Micron Thickness. , Cross Trainer : • Area: 1.32 X 0.60Mtr. Safe Area: 1.77 X 1.2Mtr. • Providing And Fixing Cross Trainer Made From “B” Class G.I. Pipe. • The Center Pipe Is Of Ø90mm Made From “C” Class G.I. Pipe, And • The Bottom Support Of M.S. Round Plate Of Ø250 Mm & 10Mm Thickness Is Welded At Bottom. • The Handle Frame Is Made Up Of Ø32mm “C” Class G.I. Round Pipe. • The Foundation Used For Fixing Is Consists Of Three Equal Items I.E. Ø90mm Made From “C” Class G.I. Round Pipe, M.S. Round Plate Of Ø250 Mm & 10Mm Thickness, 25Mm X 25Mm M.S. Angle Of 3Mm Thickness. • To Join The Center Pipe & Handle Frame Seamless Pipe Of Ø50 Mm &3Mm Thickness Is Used. • For The Movement, Bushes Are Used & For It Ø60mm &3Mm Thickness. • The Footrests Are Made From Frp/C.I. /Aluminum Casting Material; Its Sizes Are 130Mm X 310Mm& 5 Mm Thickness. • For Support Of Footrest Of Cross Trainer 130Mm X 310Mm With 5Mm Thickness M.S. Plate And 50Mm X 50Mm Crs Square Pipe With 3Mm Thickness Is Used. • Closing Caps Made From Top Quality Frp Material Which Is Of 2 Mm Thickness. • The Pins Used Is Made Up Of Ø25 Mm Harden Bright Bar. • The Bearings Used Are Of “6205Zz” Permanent Lubricated Sealed Bearing Of Reputed Make (Fag/Skf). • The Handles Used For Cross Trainer Are Of Rubber Grip. • High Tensile Steel With Galvanized Nut Bolts Are Used For Assembly. • The Powder Coat Is Done By Poly Urethane & Epoxy Powder With 60 To 70 Micron Thickness , Cycle : • Area : 1.57Mtr. X 0.57 Mtr. • Safe Area : 2Mtr X 1Mtr. • Providing And Fixing Cycle Made From “B” Class G.I. Pipe. • The Main Frame Of Ø40mm Made From “C” Class G.I. Pipe. • For The Support Of Foot Pedal M.S. Round Plate Of Ø 250Mm & 10Mm Thickness Is Used. • The Handle Frame Is Of Ø32 Mm Made From “C” Class G.I. Pipe • The Seats Is Fitted On The Frame Is Made Up Of High Quality Frp Material Of Size 330 Mm X 300Mm Is Used To Support It. • The Foundation Used For Fixing Is Consists Of 25Mm X 25Mm M.S. Angle Of 3Mm Thickness. • Closing Caps Made From Top Quality Frp Material With 2Mm Thickness. • The Pins Used Are Made Up Of Ø25mm Bright Bar. • The Bearings Used Are “6205Zz” Permanent Lubricated Sealed Bearing Of Reputed Make (Skf/Fag). • High Tensile Steel With Galvanized Nut Bolts Are Used For Assembly. • The Serclips Used For Assembly Are Of Ø25mm. • The Powder Coat Is Done By Poly Urethane & Epoxy Powder With 60 To 70 Micron Thickness , Double Bar : • Area : 1.87Mtr X 0.53Mtr. Safe Area : 4.41Mtr X 1.14Mtr. • Providing And Fixing Double Bar Made From “B” Class G.I. Pipe. • The Main Frame Of Ø80mm Made From “C” Class G.I. Pipe. • The Handle Frame Is Made Up Of Ø40 Mm “C” Class G.I. Pipe. • The Foundation Used For Fixing Is 25 X 25Mm X 3Mm Thickness Angle. • Closing Caps Made From Top Quality Frp Material With 2Mm Thickness & Steel Cap Are Used. The Powder Coat Is Done By Poly Urethane & Epoxy Powder With 60 To 70 Micron Thickness. , Double Twister : • Area : Ø 1.15 Mtr. Safe Area : Ø1.58Mtr. • Providing And Fixing Double Twister Made From “B” Class G.I. Pipe. • The Center Pipe Is Of Ø115mm Made From “C” Class G.I. Round Pipe, And • The Bottom Support Of M.S. Round Plate Of Ø250 Mm & 10Mm Thickness Is Welded At Bottom. • The Standing Frame Of The Double Twister Is Of Ø40mm Made From “C” Class G.I. Pipe. • The Handle Frame(Round Type) Of Double Twister Is Of Ø25 Mm Made From “C” Class G.I. Pipe. • The Seamless Pipe Is Used For Joining The Center Pipe Frame & Handle Frame Is Made From Ø130mm With 3Mm Thickness. • The Foundation Used For Fixing Is Consists Of Three Equal Items I.E. Ø90mm Made From “C” Class G.I. Pipe , M.S. Round Plate Of Ø250 Mm & 10 Mm Thickness & 25Mm X25mm X 3Mm M.S. Angle. • The Standing Plate Is Fitted On The Standing Frame Is Made Up Of Ø80mm Seamless Pipe. Ø300mm X 10Mm Thickness M.S. Round Plate. • Closing Caps Made From Top Quality Frp Material Which Is Of 2Mm Thickness. • The Pins Used Are Made Up Of Ø25mm Bright Bar. • The Bearing Used Are Of “6205Zz” Permanent Lubricated Sealed Bearing Of Reputed Make (Fag/Skf). • High Tensile Steel With Galvanized Nut Bolts Are Used For Assembly. • The Powder Coat Is Done By Poly Urethane & Epoxy Powder With 60 To 70 Micron Thickness. , Multifunctional Trainer: • Area: 0.60 Mtr. X 0.73 Mtr. Safe Area: 1 Mtr X 4 Mtr. • Providing And Fixing Hip Flexer Made From “B” Class G.I. Pipe. • The Main Frame Of Ø115mm Made From “C” Class G.I. Pipe, And • The Bottom Support Of M.S. Round Plate Of Ø250 Mm & 10Mm Thickness Is Welded At Bottom. • The Handle Frame Is Made Up Of Ø40mm “C” Class G.I. Pipe. • The Bottom Support Of Handle Of 80 X 40Mm X 3Mm Thickness Is Welded At Bottom. • The Foundation Used For Fixing Is Consists Of Three Equal Items I.E. Ø90mm Made From “C” Class G.I. Pipe , M.S. Round Plate Of Ø250 Mm & 10 Mm Thickness & 25Mm X 25Mm M.S. Angle Of 3Mm Thickness. • Closing Caps Made From Top Quality Frp Material Which Is Of 2Mm Thickness. • High Tensile Steel With Galvanized Nut Bolts Are Used For Assembly. • The Powder Coat Is Done By Poly Urethane & Epoxy Powder With 60 To 70 Micron Thickness. , Horizontal Bar : • Area : 1.82 Mtr. Safe Area : 2Mtr X 2Mtr. • Providing And Fixing Horizontal Bar Made From “B” Class G.I. Pipe. • The Main Frame Of Ø60mm & Ø 32Mm Made From “C” Class G.I. Pipe. • For Connecting The Center Pipe To Main Frame Pipe Ø75mm Made From “C” Class G.I. Pipe. • The Foundation Used For Fixing Is Consists Of 25Mm X 25Mm M.S. Angle Of 3Mm Thickness. • Closing Caps Made From Top Quality Frp Material Used For Assembly. • High Tensile Steel With Galvanized Nut Bolts Are Used For Assembly. • The Powder Coat Is Done By Poly Urethane & Epoxy Powder With 60 To 70 Micron Thickness. , Horse Rider : • Area : 1.18Mtr X 0.4Mtr. • Safe Area : 2.5Mtr X 1 Mtr. • Providing And Fixing Horse Rider Made From “B” Class G.I. Pipe. • The Main Frame Of Ø60mm Made From “C” Class G.I. Pipe, And • The Bottom Support Of M.S. Round Plate Of Ø250 Mm & 10Mm Thickness Is Welded At Bottom. • The Leg Movement Frame Is Of Ø40mm Made From “C” Class G.I. Pipe. • The Handle Frame Is Made Up Of Ø32 Mm “C” Class G.I. Pipe. • The Foundation Used For Fixing Is Consists Of Three Equal Items I.E. Ø90mm Made From “C” Class G.I. Pipe , M.S. Round Plate Of Ø250 Mm & 10 Mm Thickness & 25Mm X25mm M.S. Angle Of 3Mm Thickness. • The Footrests Is Made From Frp/C.I./ Aluminum Casting Material , Its Sizes Are 130Mm X 310Mm X 5Mm. For The Support 50 X 50Mm X 2Mm Crc Square Pipe Is Used . • Closing Caps Made From Top Quality Frp Material With 2Mm Thickness. • The Pins Used Are Made Up Of Ø25mm Bright Bar. • The Bearing Used Are Of “6205Zz” Permanent Lubricated Sealed Bearing Of Reputed Make (Fag/Skf). • High Tensile Steel With Galvanized Nut Bolts Are Used For Assembly. • The Powder Coat Is Done By Poly Urethane & Epoxy Powder With 60 To 70 Micron Thickness. , Leg Press : • Area: 0.40 X 1.77 Mtr. Safe Area: 1 X 2.38 Mtr. • Providing And Fixing Leg Press Made From “B” Class G.I. Pipe. • The Center Pipe Is Of Ø115mm Made From “C” Class G.I. Pipe, And • The Bottom Support Of M.S. Round Plate Of Ø250 Mm & 10Mm Thickness Is Welded At Bottom. • The Remaining Outer Frame Is Made Up Of Ø400mm “C” Class G.I. Pipe. • The Foundation Used For Fixing Is Consists Of Three Equal Items I.E. Ø80mm Made From “C” Class G.I. Pipe , M.S. Round Plate Of Ø250 Mm & 10 Mm Thickness & 25Mm X25mm X 3Mm M.S. Angle. • To Join The Center Pipe & Outer Frame Seamless Pipe Of Ø120 Mm & 3Mm Thickness Is Used. • The Seats Are Fitted On The Outer Frame Is Made Up Of Frp Material Of Size 330Mm X 300Mm Of Thickness 3 Mm & M.S. Plate Of Thickness 5 Mm And Size 250 Mm X 200Mm Is To Support It. • The Footrests Is Made From Aluminum Casting Material, Its Sizes Are 130Mm X 310Mm & 5Mm Thick • The Frame Of Footrests Consists Of Ø32 Mm Made From “C” Class G.I. Pipe. • Closing Caps Made From Top Quality Frp Material Which Is Of 2Mm Thickness. • The Inner Bushes Is Made From Seamless Pipe, Its Diameter Is 60Mm & 5Mm Thickness. • The Pins Used In Are Made Up Of Ø25 Mm Hardened Bright Bar. • The Bearing Used Are Of “6205Zz” Permanent Lubricated Sealed Bearing Of Reputed Make (Fag/Skf). The Handles Used Are Of Rubber Grip. • High Tensile Steel With Galvanized Nut Bolts Are Used For Assembly. • The Serclips Used For Assembly Are Of Ø 25Mm. • The Powder Coat Is Done By Poly Urethane & Epoxy Powder With 60 To 70 Micron Thickness. , Peck Deck: • Safe Area : 1.27Mtr X2.28Mtr • Area : 2.05Mtr X 1.21Mtr • Hieght : 2.20Mtr • Length : 2Mtr • Width : 1.19Mtr Material : • Gi Pipe : Ø115m, Ø40mm, Ø25mm. • Crca Pipe: 40 X 40Mm., 80X 40Mm. • Bright Bar: Ø20mm. • Bearing: 6203Zz, 6205Zz. • F.R.P. Seats : 330Mm X 300Mm. • Nut Bolts : ½ “ X 2” , M8 X1”, 3/8 X 1” • Plastic Cap : Ø40mm. • Frp Cap : Ø 100Mm. • Profile Plate : 1) Ø 250Mm. X 10Mm. 2) Triangular Size. 3)Pp Stopper Bush , Pommel Horse : • Area: 2.05Mtr X 0.6Mtr. Safe Area: 4Mtr X 1Mtr. • Providing And Fixing Pommel Horse Made From “B” Class G.I. Pipe. • The Main Frame Of Ø80mm, Ø60mm Made From “C” Class G.I. Pipe, And • The Bottom Support Of M.S. Round Plate Of Ø250 Mm & 10Mm Thickness Is Welded At Bottom. • The Handle Frame Is Of Ø32mm Made From “C” Class G.I. Pipe. • The Foundation Used For Fixing Is Consists Of Three Equal Items I.E. Ø90mm Made From “C” Class G.I. Pipe , M.S. Round Plate Of Ø250 Mm & 10 Mm Thickness & 25Mm X 25Mm M.S. Angle Of 3Mm Thickness. • Ø32mm “C” Class G.I. Pipe Is Place On The Frame Ø60mm Made From “C” Class G.I. Pipe 60 X 10M Thickness Flat Is Used For Supporting For It. • Closing Caps Made From Top Quality Frp Material Which Is Of 2Mm Thickness. • High Tensile Steel With Galvanized Nut Bolts Are Used For Assembly. • The Powder Coat Is Done By Poly Urethane & Epoxy Powder With 60 To 70 Micron Thickness , Push Up Bar : • Area: 1.22Mtr. X 0.55Mtr. Safe Area: 2Mtr X 1Mtr. • Providing And Fixing Push Up Bar Made From “B” Class G.I. Pipe. • The Main Frame Of Ø115mm Made From “C” Class G.I. Pipe, And • The Bottom Support Of M.S. Round Plate Of Ø250 Mm & 10Mm Thickness Is Welded At Bottom. • The Handle Frame Is Of Ø32mm Made From “C” Class G.I. Pipe. • The Foundation Used For Fixing Is Consists Of Three Equal Items I.E. 90Mm Made From “C” Class G.I. Pipe , M.S. Round Plate Of Ø250 Mm & 10 Mm Thickness & 25Mm X 25Mm M.S. Angle Of 3Mm Thickness. • Closing Caps Made From Top Quality Frp Material Which Is Of 2Mm Thickness. • High Tensile Steel With Galvanized Nut Bolts Are Used For Assembly. • The Powder Coat Is Done By Poly Urethane & Epoxy Powder With 60 To 70 Micron Thickness. , Rower : • Area: 1.2 X 1Mtr. Safe Area: 1.5. X 1.5.Mtr. • Providing And Fixing Rower Made From “B” Class G.I. Pipe. • The Main Frame Is Of80mm X 40Mm & 40Mm X 40Mm Crc Pipe With 2Mm Thickness. • The Handle Frame Is Of Ø32mm Made From “C” Class G.I. Pipe. • The Foundation Used For Fixing Of Consists Of Three Equal Items I.E. Ø40mm Made From “C” Class G.I. Pipe, C Channel Of 75Mm X 40Mm X 5Mm & 25M X 25M X 3Mm M.S. Angle. • To Join The Movement Frame To Main Frame Seamless Pipe Of Ø50 Mm &3Mm Thickness Is Used. • The Seats Which Are Fitted On The Main Frame Is Made Up Of High Quality Frp Material Of Size 330Mm X 300Mm Of Thickness 3Mm & M.S. Plate Size Of 250Mm X 200Mm X 5Mm Is Used To Support It. • Closing Caps Made From Top Quality Frp Material Which Is Of 2Mm Thickness. • The Pins Used In Are Made Up Of Ø17mm Hardened Bright Bar. • The Bearing Used Are Of “6203Zz” Permanent Lubricated Sealed Bearing Of Reputed Make (Fag/Skf). • The Handles Used Are Of Rubber Grip. • High Tensile Steel With Galvanized Nut Bolts Are Used For Assembly. • The Bushes (Stopper) Used To Avoid The Collusion. • The Serclips Used For Assembly Is Of Ø17mm. • The Powder Coat Is Done By Poly Urethane & Epoxy Powder With 60 To 70 Micron Thickness , Seated Puller Double • Area: 0.76 X 2.28Mtr. Safe Area: 1.06 X 3Mtr. • Providing And Fixing Seated Puller Made From “B” Class G.I. Pipe. • The Center Pipe Is Of Ø115mm Made From “C” Class G.I. Pipe And The Bottom Support Of M.S. Round Plate Of Ø250mm & 10 Mm Thickness Are Welded At Bottom. • The Remaining Frame Is Made Up Of Ø40mm “C” Class G.I. Pipe. • The Handle Frame Is Of Ø32mm Made From “C” Class G.I. Pipe. • The Seat Frame Is Of Ø40mm “C” Class G.I. Pipe. • For The Assembly Different Bushes Are Used Which Is Made From Seamless Pipe Of Ø50mm And 3Mm Thickness & 50Mm Solid Bar Is Used. • The Foundation Support Made Up Of Three Equal Items I.E. Ø115mm Made From “C” Class G.I. Pipe, M.S. Round Plate Of Ø 250Mm & 10Mm Thickness & 25M X 25M X 3Mm M.S. Angle. • The Seats Are Made Up Of High Quality Frp Material Of Size 330Mm X 330Mm Of Thickness 3Mm & M.S. Plate Size 250Mm X 200Mm X 5Mm Is Used To Support It. • Closing Caps Made From Top Quality Frp Material Which Is Of 2Mm Thickness. • The Pins Used Are Made Up Of Ø17mm Solid Bar. • The Bearing Used Are Of “6203Zz” Permanent Lubricated Sealed Bearing Of Reputed Make (Fag/Skf). • The Serclips Used For Assembly Is Of Ø17mm. • The Powder Coat Is Done By Poly Urethane & Epoxy Powder With 60 To 70 Micron Thickness. , Seating & Standing Twister : • Area: 1.7 X 0.66Mtr. Safe Area: 2 X 1Mtr. • Providing And Fixing Seating & Standing Twister Made From “B” Class Galvanized Iron (G.I.) Pipe. • The Center Pipe Is Of Ø100mm Made From “C” Class G.I. Round Pipe, And • The Bottom Support Of M.S. Round Plate Of Ø250mm & 10 Mm Thickness Is Welded At Bottom. • The Standing Frame Of The Seating & Standing Twister Is Of Ø40mm, Ø60mm, And Ø50mm Made From “C” Class G.I. Pipe. • The Handle Frame Of Seating & Standing Twister Is Ø32mm & Foot Resting Frame Of Seating Side Is Made From “C” Class G.I. Pipe Of Ø25mm & Ø32mm. • The Seamless Pipe Is Used For Joining The Center Pipe Frame & Handle Frame Is Made From Ø130mm With 3Mm Thickness. • The Foundation Used For Fixing Is Consists Of Three Equal Items I.E. Ø90 Mm Made From “C” Class G.I. Pipe , M.S. Round Plate Of Ø250mm & 10Mm Thickness & 25 Mm X 25Mm X 3Mm M.S. Angle. • The Standing Plate Is Fitted On The Standing Frame Is Made Up Of Ø100mm Seamless Pipe & Seating Plate Is Fitted On The Frame Is Made Up Of Ø60mm Seamless Pipe. Ø300mm X 10Mm Thickness M.S. Round Plate. • Closing Caps Made From Top Quality Frp Material Which Is Of 2Mm Thickness • The Pins Used Are Made Up Of Ø25mm Bright Bar. • The Bearing Used Are Of “6205Zz” Permanent Lubricated Sealed Bearing Of Reputed Make (Fag/Skf) • High Tensile Steel With Galvanized Nut Bolts Are Used For Assembly. • The Powder Coat Is Done By Poly Urethane & Epoxy Powder With 60 To 70 Micron Thickness. , Seated Twister Triple • Area: Ø1.15Mtr. Safe Area: Ø1.58Mtr. • Providing And Fixing Seated Twister Made From “B” Class G.I. Pipe. • The Center Pipe Is Of Ø90mm Made From “C” Class G.I. Pipe, And • The Bottom Support Of M.S. Round Plate Of Ø250mm & 10 Mm Thickness Is Welded At Bottom. • The Standing Frame Of The Seated Twister Is Of Ø40mm Made From “C” Class G.I. Pipe. • The Handle Frame (Round Type) Of Seated Twister Is Of Ø25mm Made From “C” Class G.I. Pipe. • The Seamless Pipe Is Used For Joining The Center Pipe Frame & Handle Frame Is Made From Ø130mm With 3Mm Thickness. • The Foundation Used For Fixing Is Consists Of Three Equal Items I.E. 90 Mm Made From “C” Class G.I. Pipe , M.S. Round Plate Of Ø250mm & 10Mm Thickness & 25 Mm X 25Mm X 3Mm M.S. Angle. • The Seating Plate Is Fitted On The Standing Frame Is Made Up Of Ø80mm Seamless Pipe. Ø300mm X 10Mm Thickness M.S. Round Plate. • Closing Caps Made From Top Quality Frp Material Which Is Of 2Mm Thickness • The Bearing Used Are Of “6205Zz” Permanent Lubricated Sealed Bearing Of Reputed Make (Fag/Skf). • High Tensile Steel With Galvanized Nut Bolts Are Used For Assembly. • The Powder Coat Is Done By Poly Urethane & Epoxy Powder With 60 To 70 Micron Thickness. , Shoulder Builder : • Area: Ø0.89Mtr. Safe Area: Ø1.5Mtr. • Providing And Fixing Shoulder Builder Made From “B” Class G.I. Pipe. • The Center Pipe Is Of Ø115mm Made From “C” Class G.I. Pipe, And The Bottom Support Of M.S. Round Plate Of 250Mm Diameter & 10Mm Thickness Is Welded At Bottom. • The Handle Movement Frame Is Of Ø32mm & Ø25mm Made From “C” Class G.I. Pipe. • To Join The Center Pipe & Handle Movement Frame Seamless Pipe Of Ø130mm & 3Mm Thickness Is Used. • The Foundation Used For Fixing Is Consists Of Three Equal Items I.E. Ø90mm Made From “C” Class G.I. Pipe , M.S. Round Plate Of Ø250mm & 10Mm Thickness & 25 Mm X 25Mm X 3Mm M.S. Angle. • Closing Caps Made From Top Quality Frp Material Which Is Of 2Mm Thickness • The Bearing Used Are Of “6201Zz” Permanent Lubricated Sealed Bearing Of Reputed Make (Fag/Skf). • High Tensile Steel With Galvanized Nut Bolts Are Used For Assembly. • The Serclips Used For Assembly Is Of Ø25mm. • The Poly Urethane Plastic Bush Is Used For Handling. • The Powder Coat Is Done By Poly Urethane & Epoxy Powder With 60 To 70 Micron Thickness. , Sit Up Board : • Area: 0.50 X 1.70Mtr. Safe Area: 0.86 X 2Mtr. • Providing And Fixing Sit Up Board Made From “B” Class G.I. Pipe. • The Main Frame Is Of Ø40mm & Ø32mm Made From “C” Class G.I. Pipe. • Perforated Sheet Of 1.5Mm Thickness Is Welded On 25 X 3Mm Thick Flat Patti On Main Frame. • The Base Side Of The Sit Up Board Is Made Of 50 X 20 Mm Crc Pipe. • The Powder Coat Is Done By Poly Urethane & Epoxy Powder With 60 To 70 Micron Thickness. , Sky Walker Double • Area: 1.72Mtr. 0.63Mtr. Safe Area: 2.54Mtr. X 1Mtr. • Providing And Fixing Sky Walker Made From “B” Class G.I. Pipe. • The Main Frame Is Ø80mm Made From “C” Class G.I. Pipe. • The Outer Ring Of Sky Walker Is Ø32 Made From “C” Class G.I. Pipe. • For Connecting I The Handle Frame To Main Pipe Ø60mm “C” Class G.I. Pipe Is Used. • The Bottom Support Of M.S. Round Plate Of Ø250mm & 10 Mm Thickness Is Welded At Bottom. • The Leg Movement Frame Is Of 50Mm X 50Mm X 2Mm Thick Crc Square Pipe. • The Handle Frame Is Of Ø40mm Made From “C” Class G.I. Pipe. • The Foundation Is Used For Fixing Is 80 X 40Mm X 3Mm Thickness C-Channel. • The Footrests Is Made From Aluminum Casting Material, Its Sizes Are 130Mm X310mm X 5Mm. • Closing Caps Made From Top Quality Frp Material Which Is Of 2Mm Thickness & Plastic Cap Are Used. • The Pins Used Are Made Up Of Ø25mm Bright Bar. • The Bearings Are Used Are “6205Zz” & “6203Zz” Permanent Lubricated Sealed Bearing Of Reputed Make (Fag/Skf). • High Tensile Steel With Galvanized Nut Bolts Are Used For Assembly. • The Serclips Used For Assembly Is Of Ø25mm. • The Powder Coat Is Done By Poly Urethane & Epoxy Powder With 60 To 70 Micron Thickness. , Surf Board : • Area: 0.91 X 0.86Mtr. Safe Area: 1.39 X 1.27Mtr. • Providing And Fixing Surf Board Made From “B” Class G.I. Pipe. • The Center Pipe Is Of Ø115mm Made From “C” Class G.I. Pipe, And • The Bottom Support Of M.S. Round Plate Of Ø250mm & 10Mm Thickness, 25Mm X 25Mm X 3Mm M.S. Angle. • The Foundation Used For Fixing Is Consists Of Three Equal Items I.E. Ø90mm Made From “C” Class G.I. Pipe , M.S. Round Plate Of Ø250mm & 10Mm Thickness & 25 Mm X 25Mm X 3Mm M.S. Angle. • To Join The Center Pipe & Handle Frame Seamless Pipe Of Ø130mm & 3Mm Thickness Is Used. • For The Movement Of Bushes Are Used Ø60mm With 3Mm Thickness & Ø60mm Solid Bar Is Used. • The Footrests Is Made From Aluminum Casting Material, Its Sizes Are 320Mm X270mm & 5Mm Thickness. • For Support Of Footrest Is 200Mm X 250Mm With 5Mm Thickness M.S. Plate And 50Mm X 50Mm Crc Square Pipe With 2Mm Thickness Is Used. • Closing Caps Made From Top Quality Frp Material Which Is Of 2Mm Thickness. • The Pins Used Are Made Up Of Ø25mm Bright Bar. • The Bearings Are Used Are “6205Zz” Permanent Lubricated Sealed Bearing Of Reputed Make (Fag/Skf). • The Handles Used Are Of Rubber Grip. • High Tensile Steel With Galvanized Nut Bolts Are Used For Assembly. • The Bushes (Stopper) Used To Avoid The Collusion Made From Poly Urethin Plastic Material Of Ø50mm. • The Serclips Used For Assembly Is Of Ø25mm. • The Powder Coat Is Done By Poly Urethane & Epoxy Powder With 60 To 70 Micron Thickness. , Standing Twister : • Area: Ø1.15Mtr. Safe Area: Ø1.58Mtr. • Providing And Fixing Triple Twister Made From “B” Class Galvanized Iron (G.I.) Pipe. • The Center Pipe Is Of Ø115mm Made From “C” Class G.I. Pipe, And • The Bottom Support Of M.S. Round Plate Of Ø250mm & 10Mm Thickness Is Welded At Bottom. • The Standing Frame Of The Triple Twister Is Of Ø40mm Made From “C” Class G.I. Pipe. • The Handle Frame (Round Type) Of Triple Twister Is Of Ø25mm Made From “C” Class G.I. Pipe. • The Seamless Pipe Is Used For Joining The Center Pipe Frame & Handle Frame Is Made From Ø130mm With 3Mm Thickness. • The Foundation Used For Fixing Is Consists Of Three Equal Items I.E. Ø 90 Mm Made From “C” Class G.I. Pipe , M.S. Round Plate Of Ø250mm & 10Mm Thickness & 25 Mm X 25Mm X 3Mm M.S. Angle. • The Standing Plate Is Fitted On The Standing Frame Is Made Up Of Ø80mm Seamless Pipe. Ø300mm X 10Mm Thickness M.S. Round Plate. • Closing Caps Made From Top Quality Frp Material Which Is Of 2Mm Thickness. • The Pins Used Are Made Up Of Ø25mm Bright Bar. • The Bearings Are Used Are “6205Zz” Permanent Lubricated Sealed Bearing Of Reputed Make (Fag/Skf). • High Tensile Steel With Galvanized Nut Bolts Are Used For Assembly. • The Powder Coat Is Done By Poly Urethane & Epoxy Powder With 60 To 70 Micron Thickness. , Uneven Bar : • Area: 3.2Mtr. X 1.36Mtr. Safe Area: 4Mtr. X 2Mtr. • Providing And Fixing Uneven Bar Made From “B” Class G.I. Pipe. • The Main Frame Is Ø115mm Made From “C” Class G.I. Pipe. • The Bottom Support Of M.S. Round Plate Of Ø250mm & 10Mm Thickness Is Welded At Bottom. • The Handle Frame Is Of Ø40mm Made From “C” Class G.I. Pipe. • The Foundation Used For Fixing Is Consists Of Three Equal Items I.E. 90 Mm Made From “C” Class G.I. Pipe , M.S. Round Plate Of Ø250mm & 10Mm Thickness & 25 Mm X 25Mm M.S. Angle Of 3Mm Thickness. • Closing Caps Made From Top Quality Frp Material Which Is Of 2Mm Thickness. • The Powder Coat Is Done By Poly Urethane & Epoxy Powder With 60 To 70 Micron Thickness. , Weight Lift /Bench With Fix Weight • Area: 1Mtr X 0.5Mtr. Safe Area: 1.5Mtr X 1Mtr. • Providing And Fixing Weight Lift Made From “B” Class G.I. Pipe. • The Main Frame Of Ø115 Mm Made From “C” Class G.I. Pipe , And • The Weight Lifted Rod Of Ø40mm Made From “C” Class G.I. Pipe. • Supporting Frame Of Weight Lifting Rod Is Ø32mm Made From “C” Class G.I. Pipe • The Foundation Used For Fixing Is Consists Of 25Mm X 25Mm M.S. Angle Of 3Mm Thickness. • Closing Caps Made From Top Quality Frp Material With 2 Mm Thickness. • The Powder Coat Is Done By Poly Urethane & Epoxy Powder With 60 To 70 Micron Thickness. , Seating, Standing Twister & Leg Press • Area: 1.7 X 0.66Mtr. Safe Area: 2 X 1Mtr. • Providing And Fixing Seating & Standing Twister Made From “B” Class Galvanized Iron (G.I.) Pipe • The Center Pipe Is Of Ø100mm Made From “C” Class G.I. Round Pipe, And • The Bottom Support Of M.S. Round Plate Of Ø250mm & 10 Mm Thickness Is Welded At Bottom. • The Standing Frame Of The Seating & Standing Twister Is Of Ø40mm, Ø60mm, And Ø50mm Made From “C” Class G.I. Pipe. • The Handle Frame Of Seating & Standing Twister Is Ø32mm & Foot Resting Frame Of Seating Side Is Made From “C” Class G.I. Pipe Of Ø25mm & Ø32mm. • The Seamless Pipe Is Used For Joining The Center Pipe Frame & Handle Frame Is Made From Ø130mm With 3Mm Thickness. • The Foundation Used For Fixing Is Consists Of Three Equal Items I.E. Ø90 Mm Made From “C” Class G.I. Pipe , M.S. Round Plate Of Ø250mm & 10Mm Thickness & 25 Mm X 25Mm X 3Mm M.S. Angle. • The Standing Plate Is Fitted On The Standing Frame Is Made Up Of Ø100mm Seamless Pipe & Seating Plate Is Fitted On The Frame Is Made Up Of Ø60mm Seamless Pipe. Ø300mm X 10Mm Thickness M.S. Round Plate. • Closing Caps Made From Top Quality Frp Material Which Is Of 2Mm Thickness • The Pins Used Are Made Up Of Ø25mm Bright Bar. • The Bearing Used Are Of “6205Zz” Permanent Lubricated Sealed Bearing Of Reputed Make (Fag/Skf). • High Tensile Steel With Galvanized Nut Bolts Are Used For Assembly. • The Powder Coat Is Done By Poly Urethane & Epoxy Powder With 60 To 70 Micron Thickness. , Seated Twister Double • Area: Ø1.15Mtr. Safe Area: Ø1.58Mtr. • Providing And Fixing Seated Twister Made From “B” Class G.I. Pipe. • The Center Pipe Is Of Ø90mm Made From “C” Class G.I. Pipe, And • The Bottom Support Of M.S. Round Plate Of Ø250mm & 10 Mm Thickness Is Welded At Bottom. • The Standing Frame Of The Seated Twister Is Of Ø40mm Made From “C” Class G.I. Pipe. • The Handle Frame (Round Type) Of Seated Twister Is Of Ø25mm Made From “C” Class G.I. Pipe. • The Seamless Pipe Is Used For Joining The Center Pipe Frame & Handle Frame Is Made From Ø130mm With 3Mm Thickness. • The Foundation Used For Fixing Is Consists Of Three Equal Items I.E. 90 Mm Made From “C” Class G.I. Pipe , M.S. Round Plate Of Ø250mm & 10Mm Thickness & 25 Mm X 25Mm X 3Mm M.S. Angle. • The Seating Plate Is Fitted On The Standing Frame Is Made Up Of Ø80mm Seamless Pipe. Ø300mm X 10Mm Thickness M.S. Round Plate. • Closing Caps Made From Top Quality Frp Material Which Is Of 2Mm Thickness • The Bearing Used Are Of “6205Zz” Permanent Lubricated Sealed Bearing Of Reputed Make (Fag/Skf). • High Tensile Steel With Galvanized Nut Bolts Are Used For Assembly. • The Powder Coat Is Done By Poly Urethane & Epoxy Powder With 60 To 70 Micron Thickness. , Tai Chi Spinners : • Providing And Fixing Taichi Spinner From “B” Class G.I. Pipe. • Bottom Support In M.S. Round Plate 250Mm Dia. • The Handle Movement Frame 25Mm Nb “C” Class G.I. Pipe. • Center Pipe 130Mm Dia. & 3Mm Thickness. • Foundation Made From 100Mm Nb “C” Class G.I. Pipe & M.S. Round Plate 250Mm Dia. • Pins Made Up Of 25Mm Dia. In Bright Bar. • Bearing Used Are “6201” And “6205” Permanent Lubricated Sealed. • Pu Plastic Bushes Are Used For Handling. • The Nut Bolts Used For Assembly Are In Ss Material. • Yellow Primer Is Applied Before Top Coat Or Duly Powder Coated Using Best Quality Brand Paint. , Frp Slide 1.5 M , Arch Swing , Standard See Swa , Multi Seatar See Swa , Two Seat Swing , Rocking Boat , A To B Climber , Economy Slide , 3 In 1 Combination , Multi Play System , Rock Climber + Lader , Providing & Making Water Fall Modal Die For 2 Mx2mx3m In Frp Material In Grade 1 & Along With Labour, Transport, Installation, Testing Etc. , Providing & Installation Stone Look Artificial Frp Water Fall Casting Of 6 To 8 Mm For Size 2M X 2 M X3m In Artificial Stone Look In Black / Green/ Gray Etc. Colour Shading Along With Aprropriate Water Motor, Light, Labour, Transport Etc. Complete , Providing & Fixing Cast Iron Bench In Decorative Model Of 1.2 M Length And Capacity Of 3 Person With Ms Pipe/ Strip Etc. Complete
