Bids Are Invited For Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm 2 For thickness of tiles above 25 mm and up to 40 mm 3 Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: Asbestos Cement sheet 4 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 5 Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. 6 Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 60 mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern. 7 Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineer-in-charge. 8 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25mmthick Unit Sqm Sqm Sqm Sqm Sqm Sqm each sq mtr 9 Providing and fixinf first quality ceramic glazed wall tiles confirming to IS:15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 11 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. PolishedGranitestoneslabofcolourBlack,Cherry/RubyRedor equivalent 12 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1cement: 4 coarse sand) 13 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes 14 Providing and fixing in wall lining medium density fibre board IS: 14587:1998 marked, Prelaminatedonesidedecorativelaminationandothersidebalancinglaminatio n,withnecessary fixing arrangement and screws etc. complete. 25mm thick. 15 Providing and fixing ISI marked flush door shutters conforming to IS:2202(PartI)decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30mm thick including ISI marked Stainless Steel butt hinges with necessary screws Sqm Sqm 10 Providing and laying vitrified Floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Glazed vetrified fllor tiles polished finish of Size of Tile 600x1200 mm Sqm Sqm Kg Sqm Sqm Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced withgalvanized mild steel section made of required shape & size as per CPWDS pecification, uPV Cextrudedglazing beads, inter locks and Inlinesashadaptor(where ever required) of appropriate dimension, EPDM gasket, hardware, SS304gradefasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleevefor fixing frame to finished wall as perIS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/ mechanically jointed dulysealedatallcorners,including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finishedwallshallbefilledwithweatherproofsiliconsealantover backer rod of approved size and quality, all complete as per approved drawing conformin gto CPWD specification&directionofEngineer-inCharge.Sectionofsteelreinforcement and crosss ections of uPVC profiles to be as per design approved by Engineer-in-Charge. Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. Using R2 series with frame (70mm & above) x (40mm & above) & both glazed and fly screen sash (25mm & above) x (50mm & above) with zinc alloy (zamak) powder coated touch locks with hook. (Height upto 1.2 metre). 17 Providing and fixing tiled false ceiling of specified materials 16 Sqm Sqm 18 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50mm (base metalofminimum0.45mmthicknesswithtotalcoatingthicknes sof0.05mm)withzinccoating 120gramspersqmasperIS:277,in240mpasteelgrade,5- 7micronsepoxyprimeronboth side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard filmof25micronsminimumtoavoidscratchesduringtransporta tionandshouldbesupplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto anypitchinhorizontal/verticalorcurvedsurfaces,excludingthe costofpurlins,raftersand trusses and including cutting to size and shape wherever required. of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main T runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross T of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main T at 600 mm center to center to form a grid of 1200x600 mm and secondary cross T of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main T runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all Tsections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all Sqm 19 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 250 mm 20 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 21 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 22 Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm 23 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. 24 Cleaning and repair of Existing RCC Drain Included taking out Existing, RCC drain Covers and Relaying the same after Cleaning of Drain and Disposal of Malba out side the Campus Complete in complete in proper working condition to drain out Rain water and as per Instructions of Engineer In Charge 25 Misc plumbing and Sanitary Works with Providing and fixing of new PVC pipe for water supply and all Required Fittings in Canteen Block Complete 26 Floor polishing on masonry or Marble floors including stairs with rubbing, Gridning and wax polish of approved brand and manufacture complete. ELECTRICAL 27 Supply, installation and connection of 2ft X2Ft Led Panel light 36W in 6K, having IP 20 rating and dimension od 600*50 mm. with all the necessary arrangements for hanging the lights. As per the direction of officer in charge make Wipro, Havells, Bajaj and Philips Each Sqm Sqm Sqm Cum Mtr Job Sqm Each Wiring of circuit/submain wiring along with earth wire with the following size FRLC pvc insulated copper conductor , Single core cable in surface /recessed PVC conduit as required 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Supplying and drawing of following sizes of FRLC pvc insulated copper conductor , Single core cable in existing surface /recessed steel/PVC conduit as required (a) 3 X 1.5 sq.mm 30 (b) 3 X 2.5 sq. mm Supplying and fixing following size/ modules, GI box along with base & cover plate for modular switches in recess etc. as required 12 module Supplying and fixing of following modular switch / socket on existing modular plate & switch box including connections but excluding modular plate etc as required 5/6 A switch 33 3 pin 5/6 A socket outlet 34 Supplying and fixing of modular blanking plate on the existing modular plate and switch box excluding modular plate as required Supplying and fixing of following size of medium class PVC conduit along with accessories in surface /recess including cutting the wall and making good the same in case of recessed conduit as required 25 mm Total Quantity : 14619
