Tender For Renovation/Up Gradation Of Ams Chemistry Lab At Iuac, delhi-Delhi

Tender For Renovation/Up Gradation Of Ams Chemistry Lab At Iuac; 1 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) 2 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) 3 6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand) 4 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab colour black, Cherry/Ruby red as per Engineer-in-Charge. 5 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat of size 45mm*70mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/ mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). 6 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid board of 18 mm thickness one side white color and other side of board laminted with PVCfoil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/kitchen cabinet etc. of required sizes comprisingof virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimumcompressive strength50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread offlame of Class Acategory with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with PTMT hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note:PTMT hinges shall be paid separately) 7 Providing and fixing PTMT Butt hinges with necessary screws etc. complete- 75x60x10 mm fitted with 5.5 mm dia M.S. Bright Bar Rod weighing not less than 34 gms 8 Providing and fixing PTMT handles with necessary screws etc. complete- 125x34x24 mm weighing not less than 23 gms 9 Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms 10 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:One or more coats on old work 11 P/F White vitreous china laboratory sink 600x450x200 mm 12 Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms 13 Providing and fixing PTMT bib cock of approved quality and colour. :15 mm nominal bore, 165 mm long, weighing not less than 110 gms 14 Providing and fixing PTMT Bottle Trap for Wash basin and sink.:Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms 15 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes of 15 mm nominal dia, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge: Internal work - Exposed on wall 16 Providing and fixing PTMT health faucet with flexible tube upto 1 metre long for European type W.C. of quality and make as approved by Engineer - in - charge.

Refer document

Refer document

INR 4 Lakhs /-