Tender For Work To Be Done Under The Deposit Scheme Item Against Various Approved Packages Under Electricity Distribution Division Ii, Etawah, Carriage Of Pcc Pole From Store Center Kunera Etawah To Site Of Work Through The Kacha And Pakka Road Including , etawah-Uttar Pradesh

tender for Work to be done under the deposit scheme item against various approved packages under Electricity Distribution Division II, Etawah, Carriage of PCC pole from Store Center Kunera Etawah to site of work through the Kacha and Pakka road including the work of its loading and unloading at the respective ends including the cost of arrangement of labour, T&P, carrier etc. required for proper completion of work. ST/PCC pole Line material i.e. conductor, G.I. wire TPMO stay rod, disc insulator, cross arm, Angle channel, Different type of Clamps and other required material AB Cable 1x16+1x25 ACSR Weasel Conductor Cable Alluminium PVC 2x16 Sqmm Cable Alluminium PVC 3.5x70 Sqmm 33 Kv XLPE Cable 3x185 Sqmm 16 KVA Distribution Transformer 25 KVA Distribution Transformer 63 KVA Distribution Transformer Erection of single support by ST/PCC pole including fixing complete HT/LT fittings as per RESSPO Munual including the cost of labour, T&P and carrier etc. required for proper completion of work. Grouting of single support ST/PCC pole as per RESSPO Manual including of the cost of labour, T&P and carrier etc. required for proper completion of work. The support shall be grouted with cement, sand & brick ballast in ratio 1:4:8 including the cost of arrangement of cement, sand, brick ballast etc. Erection & grouting of double pole including fixing complete HT/LT fitting as per RESSPO Manual including the cost of labour, T&P and carrier etc. required for proper completion of work. The support shall be grouted with cement, sand & brick ballast in ratio 1:4:8 including the cost of arrangement of cement, sand, brick ballast etc. Laying, sagging, stringing, binding & jumpering of ACSR Weasel Conductor on the newly erected pole as per RESPO manual and as per direction of supervising engineer, including the cost of arrangement of labour, T&P carrier etc. required for proper completion of work. Laying spreading, lifting and final sagging of Arial Bunched Cable (all size). including fixing of all accessories as per RESSPO Manual and as per direction of supervising engineer, including the cost of arrangement of labour, T&P carrier etc. required for proper completion of work. : Erection and grouting of stay set including the work of nozzling etc. as per RESPO manual and also including the cost of arrangement of all grouting material, labour, T&P etc. required for proper completion of work as per RESSPO Manual. Fixing & connecting of earthing rods as per RESSPO Manual including the cost of labour, T&P etc. required for proper completion of work. Mounting of 16 KVA Transformer on the Single Pole/Double pole/Plinth structures and connections thereof. Mounting of 25 KVA Transformer on the Single Pole/Double pole/Plinth structures and connections thereof. Mounting of 63 KVA Transformer on the Single Pole/Double pole/Plinth structures and connections thereof. Digging, laying and back filling of 3X185 Sqmm XLPE cable including the cost of Cable hoisting and making loops/ HDPE pipe/clamps as per RESPO manual and as per direction of supervising engineer including the cost of arrangement of brick, sand, labour and T&P etc. required for proper completion of the work. Filling Of 11 Kv Heat Shrinkable Cable Jointing Kit (Indoor/Outdoor Type) Suitable for XLPE 3x185 Sqmm with Supply. (including the cost arrangement of labour, T&P, carrier etc. required for proper completion of work) Guarding of HT/LT 11 Kv Line with GI wire as per RESPO Norms. including the cost of arrangement of labour, T&P etc required for proper completion of work. Installation & Fixing of following accessories. including the cost of labour, T&P and carrier etc. required for proper completion of work. Polymer Disc Insulator 11 Kv F Clamp Top Channel Pin Insulator with Pin Base Angle T-Off Channel T/F Base Angle MS Dropper Channel 11 Kv V type Steel Cross Arm 11 Kv Cross Arm Clamp for PCC 11 Kv DP Clamp Disc Fitting (B&S) Disc Fitting Nut Bolt Guarding Angle

INR 1180 /-

INR 9540.0 /-

Refer document