Repair/ Renovation Of Sdh Sohanjana.-- 1 Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking outjoints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead With cement mortar 1:4 2 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead : 15.12.1 Of area of 3 sqm. and below 3 Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal ofunserviceable material within 50 meters lead as per direction of Engineer-in-charge. 4 Fixing chowkhats(steel door window ) in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding holdfasts incement concrete blocks of size 15x10x10cm with cement concrete 1:3:6 (1cement :3 coarse sand: 6 graded stone aggregate 20 mm nominal size),painting two coats of approved wood/steel preservative to sides of chowkhatsand making good the damages to walls and floors as required complete,including disposal of rubbish to the dumping ground within 50 meters lead Door 5 Fixing chowkhats(steel door window ) in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding holdfasts incement concrete blocks of size 15x10x10cm with cement concrete 1:3:6 (1cement :3 coarse sand: 6 graded stone aggregate 20 mm nominal size),painting two coats of approved wood/steel preservative to sides of chowkhatsand making good the damages to walls and floors as required complete,including disposal of rubbish to the dumping ground within 50 meters leadwindows 6 Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains,pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspitsand the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil 7 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) 8 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) 9 Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size) 10 Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in 1:6 mix 11 Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level 12 Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) 13 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth levelThermo-Mechanically Treated bars of grade 14 Supplying and fixing C.I. cover without frame for manholes:20.14.1 455x610mm rectangular C.I. cover (light duty) the weight of thecover to be not less than 23 kg. 15 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works To be paid as per actual 16 Providing and laying damp-proofCourse 50 mm thickwith cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete 17 Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete. 18 formwork for surface of slab 19 edges of slab under 20cm wide 20 Appying 12mm thick cement sand plaster 1:6 mix inner side 21 Appying 15mm thick cement sand plaster 1:6 mix outer side 22 6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) 23 Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank ISI : 12701 marked, with cover and suitable lockingarrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank 500 liter size 24 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laidon 20 mm thick bed of cement mortar 1: 4( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete.11.50.1 In colour such as White, Ivory, Grey, Fume Red Brown 25 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 26 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. 19.3.1.2 20mm nominal outer dia pipes. 27 Providing and fixing brass stop cock of approved quality.19.10.1 15 mm nominal bore 28 Providing and fixing uplasticized PVC connection pipe with brass unions 19.15.1.2 20 mm nominal bore 29 Providing and fixing ball valve (brass) of approved quality, High or lowpressure, with plastic floats complete 19.12.1 15 mm nominal bore 30 Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 31 Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ringconforming to IS: 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes 12.58.2 110 mm diametre 32 Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ringconforming to IS: 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes 12.58.1 75 mm diametre 33 Removing white or colour wash by scrapping and sand papering andpreparing the surface smooth including necessary repairs to scratches etc.complete. 34 Applying priming coat: With ready mixed pink or grey primer of approved brandand manufacture on wood work (hard and soft wood) 35 Painting with synthetic enamel paint of approved brand and manufactureto give an even shade. 36 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.new steel work 37 Providing and fixing electric points complete in all respects as per necessity at site including laying of PVC conduit pipes, junction box, module,MCB and laying of electric wires of a approved make and thickness and fixing of switches, installation and testing complete job. @LMR 38 Providing wood work in frames of doors, windows, clerestory windows andother frames, wrought framed and fixed in position with hold fast lugs or withdash fasteners of required dia and length (hold fast lugs or with dash fastenersshall be paid for separately): 39 Providing and fixing wooden moulded beading/Mullion/ muntin bars/ grid wooden bars to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete:2nd class kail wood50 x 12 mm 40 Providing and fixing glazed shutters for doors, windows and clerestory windowsusing 4mm thick float glass panes including ISI marked M.S. pressed butthinges bright finished of required size with necessary screws. 41 Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge 42 Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size withnecessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. 35mm 43 Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area ofopening for panel inserts excluding portion ins ide grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. 44 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. 45 Dismantling W.C. Pan of all sizes including disposal of dismantledmaterials i/c malba all complete as per directions of Engineer-in-Charge. 46 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid , 10 liter low level white vitreous china flushing cistern and CP flush bend with fittings and C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make andmosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: 47 Demolishing brick work manually/by mechanical means includingstacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: 48 Providing and applying white cement based putty of specified thickness,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.2mm 49 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer 50 Regrading terracing of mud phaska covered with tiles or bricks, in cement by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud phaska to proper slope, relaying mud plaster gobri leaping and tiles or bricks, grouted in cement mortar 1:3 (1 cement: 3 fine sand), including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded) within 50 meters lead. 51 Painting top of roofs with bitumen of approved quality at 17 kg per 10sqm impregnated with a cost of coarse sand at 60 cudm per 10 sqm including cleaning the slab surface with brushes and finally with a piece of cloth 52 Supply and fixing 20/22 watt LED light/Tube/al. hosing with 2000 lumens 53 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing 18.32.2 Rectangular shape 453x357 mm 54 Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required :- white vitreous china Flat back wash basin Size 450x300mm with single 15mm C.P. brass tap 55 Providing and fixing white vitreous china pedestal for wash basincompletely recessed at the back for the reception of pipes and fittings. 56 Providing and fixing P.V.C. waste pipe for sink or wash basin includingP.V.C waste fittings complete 57 Providing and fixing bright finished MS tower bolts (barrel type) with necessary screws etc. complete. 150mm 58 Providing and fixing bright finished MS tower bolts (barrel type) with necessary screws etc. complete. 100 mm 59 Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size includingnecessary filling up of gaps at j unctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) 60 Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in charge. Pre-laminated particle board with decorative lamination on both sides. 61 Providing and fixing glazing in aluminum door, window, ventilatorshutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin- charge. glass 62 Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. 63 Providing and fixing aluminum extruded section body tubular type universal hydraulic door closer,(having brand logo with IS: 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete : 64 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete 65 Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 75mm 66 Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete 100mm 67 Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete. 250x16 mm size. 68 Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in Cement mortar 1:4 ( 1 cement : 4 coarse sand). 69 Extra for half Brick masonry in superstructure above plinth level upto floor V level. 70 Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) 71 Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 72 Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately. For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately in Powder coated aluminum (minimum thickness of powder coated 50 microns) 73 Providing and Fixing of Hardware Fittings of approved quality I-Hook/eyes150 mm 74 Providing and Fixing of Hardware Fittings of approved quality Handles125 mm 75 Providing and Fixing of Hardware Fittings of approved quality Aldrop/sliding door lock 300x16 mm 76 Providing and Fixing of Hardware Fittings of approved quality MS butt hinges 100x58x1.90 mm 77 Supplying and fixing of ceiling fan 1200 mm sweep of approved brands complete job 78 Labour engaged for Cleaning /clearing roof top of S/C and G/site clearance 79 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same withnecessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be consideredexcluding fixing accessories such as nuts, bolts, fasteners etc.). 80 Carr of sand + agg 10 KM by MT 81 carr of bricks 10 km 82 Add cost of writing on buildings wall
