Bids Are Invited For 1 On load change over switch in sheet steel enclosure with nut bolts and mounting arrangement (clamps) on surface/wall conforms to IS-13947 (Part 3) -1993 having following specifications- Four Pole, 100A, 440 volts, Ambient temp 40 degree centigrade, Insulation voltage-1000volts,Utilisation category-AC 23A,sheet steel enclosure having gland plates at top and bottom, It should have properly marked ON-OFF(I/C 1-OFF-I/C 2) indication on the switch. It shall be mounted at any angle on a vertical wall / plane, Terminal should be suitable for Al./Cu. links/lugs connection. Complete with double earthing studs, nuts, bolts washers and all other accessories, Make L&T / Siemens / Havells / Crompton / HPL / Control & Switchgear / Equivalent make 5 2 On load change over switch in sheet steel enclosure with nut bolts and mounting arrangement (clamps) on surface/wall conforms to IS-13947 (Part 3) -1993 having following specifications- Four Pole, 400A, 440 volts, Ambient temp 40 degree centigrade, Insulation voltage-1000volts,Utilisation category-AC 23A,sheet steel enclosure having gland plates at top and bottom with three no. holes for glanding of 3&1/2 400sq. Mm Aluminum conductor armoured cable, It should have properly marked ON-OFF(I/C 1-OFF-I/C 2) indication on the switch. It shall be mounted at any angle on a vertical wall / plane, Terminal should be suitable for Al./Cu. links/lugs connection. Complete with double earthing studs, nuts, bolts washers and all other accessories, Make L&T / Siemens / Havells / Crompton / HPL / Control & Switchgear/Equivalent make. 5 3 On load change over switch in sheet steel enclosure with nut bolts and mounting arrangement (clamps) on surface/wall conforms to IS-13947 (Part 3) -1993 having following specifications- Four Pole, 250A, 440 volts, Ambient temp 40 degree centigrade, Insulation voltage-1000volts,Utilisation category-AC 23A,sheet steel enclosure having gland plates at top and bottom with three no. holes for glanding of 3&1/2 250sq. Mm Aluminum conductor armoured cable, It should have properly marked ON-OFF(I/C 1-OFF-I/C 2) indication on the switch. It shall be mounted at any angle on a vertical wall / plane, Terminal should be suitable for Al./Cu. links/lugs connection. Complete with double earthing studs, nuts, bolts washers and all other accessories, Make L&T / Siemens / Havells / Crompton / HPL / Control & Switchgear / Equivalent make 5 4 Switch disconnector fuse unit (tpn) 63a, 3poles+neutral,utilisation category-ac23a, in sheet enclosure, bolted type and fuse compartment should be ip-20 protected. make- l&t / Siemens / havells / crompton/ equivalent 20 5 Switch disconnector fuse unit (tpn) 32a, 3poles+neutral,utilisation category-ac23a, in sheet enclosure, bolted type and fuse compartment should be ip-20 protected. make- l&t/siemens/havells/crompton/equivalent 20 6 Switch disconnector fuse unit (tpn) 125a, 3poles+neutral,utilisation category-ac23a, in sheet enclosure, bolted type and fuse compartment should be ip-20 protected, fuse barrier between the fuses for inter phase fault. make- l&t/siemens/havells/crompton/equivalent 5 7 Switch disconnector fuse unit (tpn) 250a,440volts,3poles+neutral, utilisa tion category-ac23a, in sheet enclosure, din type and fuse compartment should be ip-20 protected, fuse barrier between the fuses for inter phase fault. make- l&t/siemens/havells/crompton/equivalent 5 8 Switch disconnector fuse unit (tpn) 400a,440volts,3poles+neutral,utilisation category-ac23a, in sheet enclosure, din type and fuse compartment should be ip-20 protected, fuse barrier between the fuses for inter phase fault. make- l&t /siemens /havells/ crompton/equ ivalent 10 Total Quantity : 75