Supply And Delivery Of Light Commercial Vehicle (Tata Ace) (1 No) In Thondi Town Panchayat , Supply And Delivery Of Light Commercial Vehicle (Tata Ace) , The Quantities Have Given Are Those Upon Which The Lump-Sum Tender Cost At The Work Is Caused But They Are Subject To Alterations, Omissions, Deductions Or Additions As Provided For In The Conditions Of The Contract And Do Not Necessarily Showthe Actual Quantities Of The Work To Be Done.The Unit Of Rates Noted Below Are Those Governing Payment For Extras Or Deductions For Omission According To The Conditions Of The Contract As Set Forth In The Conditions And Specification For The Contract. , It Is To Be Expressively Understood That The Measured Work It Is To Be Taken Out (Not Withstanding Any Customarily Practice To The Contrary According To The Actual Quantities When The Place And Finished Accordingly To The Drawings Or As May Be Ordered Time To Time By The Town Panchayat Engineer And The Cost Calculated By Works Connected There With.The Rate Quoted Is For The Works In Site And Complete In Every Respect. , The Material Required For The Works Must Be Supplied By The Contractor And Of The Approved Quality , Displacement(Cc)/Engine Capacity.-700 Cc - 1250 Cc , Max Power20- 30Bhp @2500 Rpm And Above , Max Torque5oonm@ 2000 Rpm And Above , Type Of Fueldiesel , Load Capacity2 Cu.Rn , Vehicle Emission Normsbs -Vi , No Of Cylinder In Engine2 — 4 Cylinder , Length Of Chassis3800 Mm - 3950 Mm , Width Of Chassis1500 Mm — 1550 Mm. Ground Clearance. 150 Mm -165Mm , Fuel Tank Capacitydiesel-30Ltrs To 40 Ltrs Cng- 12-25Kg , Size Of Tyre’S & No‘S145 R 1 2 —5 N Os. , Wheel Base1900 Mm — 2250 Mm , Gross Vehicle Weight1550 Kg1900 Kg , Clutchsingle Plate Dry Friction Diaphragm , Transmission Systemmanual , No Of Speed/Forward Gears4 Nosspeeds(4F+ 1R) , Type Of Steeringmanual / Power , Speed Governorsshall Be Fitted , Pay Load800kg To 1000Kg , Tipper Body Length2100 Mm-2200Mm,Mild Steel , Tipper Body Width1400 Mm - L500mm, Mild Steel , Tipper Body Height750mm- 950 Mm, Mild Steel , Side Portion (Lh & Rh)& Rear Doors Sheet Thickness2 Mm, Mild Steel , Tipper Body Topsheet Including Frame Sheet Thickness1.6Mm, Mild Steel , Tipper Body Top Lid Sheet Thickness1.2Mm,Mildsteel , Tipper Containertipper Containershouldbe Fabricated With Two Doors On The Rear Side And Four Doors On Four Top Corners Of The Containerswith Hinges And Locking System.Apartitionshouid Be Provided Onthe Middie Of Container Along The Verticallen Gth Of The Body. , Tipper Body Top Lid Main Sheet Thickness75 X 40 X 6 Mm , Hydraulic Cylinder Makereputedmake , Hydraulicsystem Drivenmain Engine , Pump Makeas Per Is Standard , Pai Ntingshould Be Paintedwith One Coat Of Anti-Corrosive Epoxyprimer And Two Coats Of Enamelpaint For Approved Qualityto Ensure Long Lasting Resistance For Weatheri Zing And Breaka 9E. The Color Shadeshould Be As Per Norms. , Letteringto Be Carried Out As Directed By Dept Ofñcers , Tipper Body Rear Doorshall Bewithnecessarylockingfacility . , Side Safetyguardshall Be Provided As Per Rto Requirement , Additional Conditionsvehiclewith Fuel Sensor And Gps Tracking. , Warrantydistance/Year25000km//12 Months Whicheveris Earlier.
