Tender For 33418441 Shoes,Safety,La,Vulcanized-Rbr 1 33418441 0001 0001 300914282 SHOES,SAFETY,LA,VULCANIZED-RBR,2,CT Technical Details Name : amisha mistri Contact : Email : amisha.mistri@ext.amns.in 5 PAA SHOES,SAFETY TYPE:LOW ANKLE UPPER MATERIAL:WATER REPELLANT BUFF CG BARTON PRINT LEATHER THICKNESS (UPPER MATERIAL):2.0MM ± 0.2 MM SOLE MATERIAL:DIRECT VULCANIZE NITRILE RUBBER SOLE , SIZE:2 (UK) TOE CAP:200J IMPACT RESISTANT COMPOSITE TOE CAP COLLAR:PU FOAM PADDED CUSHIONED COLLAR TONGUE:PU FOAM PADDED BELOW TYPE TONGUE MADE OF LEATHER VAMP LINING:NON-WOVEN FELT LINING QUARTER AND TONGUE LINING:NON-WOVEN BREATHABLE TYPE LINING LAMINATED WITH 5MM PU FOAM GSM: 150 + 5% IN-SOCKS:ARCH SUPPORTED EVA MOULDED SOCKS LINED WITH FABRIC THICKNESS 3MM(MIN)AT FOREPART AND 5MM AT HEEL INSOLE:2.5MM THICK NON-WOVEN STROBLE INSOLE EYELETS:4 SETS OF METALLIC POWDER COATED EYELETS / D-RING LACES:80-100 CM NYLON LACE WITH BREAKING STRENGTH 50-60 KG THREAD:NYLON VARIETY H1 & L2 STANDARDS:IS 15298(PART-2):2016, EN ISO 20345:2011 PROTECTION:ABRASION, FUEL OIL AND SLIP RESISTANT, ANTISKID, MILD ACID/ ALKALIES RESISTANT, HEAT RESISTANT SOLE HEAT RESISTANCE:RESISTANT TO HOT CONTACT UPTO 300°C FOR 1 MINUTE ELECTRICAL RESISTANCE:ANTISTATIC 100KOHM - 1000MOHM FINISH:ELEGANT AND SPRAY FINISH MARKING:STANDARD, LICENCE NO., BRAND NAME, SIZE, DATE OF MANUFACTURING, ETC ADDITIONAL INFORMATION:REFLECTOR AT HEEL AND BOTH SIDE PROFILE ADDITIONAL INFORMATION 1:TOE CAP WITH PADDING UNDER TOE CAP. PROTECTION AGAINST COMPRESSION INJURY UPTO 15KN Item Details : Delivery of Shoes required in Partial Quantity, in 9-10 Lots or depends on Sizes available. Vendor will be intimated prior to 45 Days of requirement. Only Manufacturer / Authorized Distributor or Channel Partner will be allowed. Test Certificate of the Safety Shoes required for the Delivered lot. Item Note : PLAZ QUOTE 5000 PAA extra sizes of 5000 pairs will be given later. 2 33418441 0002 0002 300914285 SHOES,SAFETY,LA,VULCANIZED-RBR,3,CT Technical Details Name : amisha mistri Contact : Email : amisha.mistri@ext.amns.in 70 PAA SHOES,SAFETY TYPE:LOW ANKLE UPPER MATERIAL:WATER REPELLANT BUFF CG BARTON PRINT LEATHER THICKNESS (UPPER MATERIAL):2.0MM ± 0.2 MM SOLE MATERIAL:DIRECT VULCANIZE NITRILE RUBBER SOLE , SIZE:3 (UK) TOE CAP:200J IMPACT RESISTANT COMPOSITE TOE CAP COLLAR:PU FOAM PADDED CUSHIONED COLLAR TONGUE:PU FOAM PADDED BELOW TYPE TONGUE MADE OF LEATHER VAMP LINING:NON-WOVEN FELT LINING QUARTER AND TONGUE LINING:NON-WOVEN BREATHABLE TYPE LINING LAMINATED WITH 5MM PU FOAM GSM: 150 + 5% IN-SOCKS:ARCH SUPPORTED EVA MOULDED SOCKS LINED WITH FABRIC THICKNESS 3MM(MIN)AT FOREPART AND 5MM AT HEEL INSOLE:2.5MM THICK NON-WOVEN STROBLE INSOLE EYELETS:4 SETS OF METALLIC POWDER COATED EYELETS / D-RING LACES:80-100 CM NYLON LACE WITH BREAKING STRENGTH 50-60 KG THREAD:NYLON VARIETY H1 & L2 STANDARDS:IS 15298(PART-2):2016, EN ISO 20345:2011 PROTECTION:ABRASION, FUEL OIL AND SLIP RESISTANT, ANTISKID, MILD ACID/ ALKALIES RESISTANT, HEAT RESISTANT SOLE HEAT RESISTANCE:RESISTANT TO HOT CONTACT UPTO 300°C FOR 1 MINUTE ELECTRICAL RESISTANCE:ANTISTATIC 100KOHM - 1000MOHM FINISH:ELEGANT AND SPRAY FINISH MARKING:STANDARD, LICENCE NO., BRAND NAME, SIZE, DATE OF MANUFACTURING, ETC ADDITIONAL INFORMATION:REFLECTOR AT HEEL AND BOTH SIDE PROFILE ADDITIONAL INFORMATION 1:TOE CAP WITH PADDING UNDER TOE CAP. PROTECTION AGAINST COMPRESSION INJURY UPTO 15KN Item Details : Delivery of Shoes required in Partial Quantity, in 9-10 Lots or depends on Sizes available. Vendor will be intimated prior to 45 Days of requirement. Only Manufacturer / Authorized Distributor or Channel Partner will be allowed. Test Certificate of the Safety Shoes required for the Delivered lot. Item Note : Page 2 of 6 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000118032 Date 03.08.2024 Submission Date 13.08.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Ms. Heena Patel Contact Email HEENA.PATEL1@AMNS.IN MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Material / Service No. Quantity UOM Detail Description Other Details 3 33418441 0003 0003 300914284 SHOES,SAFETY,LA,VULCANIZED-RBR,4,CT Technical Details Name : amisha mistri Contact : Email : amisha.mistri@ext.amns.in 130 PAA SHOES,SAFETY TYPE:LOW ANKLE UPPER MATERIAL:WATER REPELLANT BUFF CG BARTON PRINT LEATHER THICKNESS (UPPER MATERIAL):2.0MM ± 0.2 MM SOLE MATERIAL:DIRECT VULCANIZE NITRILE RUBBER SOLE , SIZE:4 (UK) TOE CAP:200J IMPACT RESISTANT COMPOSITE TOE CAP COLLAR:PU FOAM PADDED CUSHIONED COLLAR TONGUE:PU FOAM PADDED BELOW TYPE TONGUE MADE OF LEATHER VAMP LINING:NON-WOVEN FELT LINING QUARTER AND TONGUE LINING:NON-WOVEN BREATHABLE TYPE LINING LAMINATED WITH 5MM PU FOAM GSM: 150 + 5% IN-SOCKS:ARCH SUPPORTED EVA MOULDED SOCKS LINED WITH FABRIC THICKNESS 3MM(MIN)AT FOREPART AND 5MM AT HEEL INSOLE:2.5MM THICK NON-WOVEN STROBLE INSOLE EYELETS:4 SETS OF METALLIC POWDER COATED EYELETS / D-RING LACES:80-100 CM NYLON LACE WITH BREAKING STRENGTH 50-60 KG THREAD:NYLON VARIETY H1 & L2 STANDARDS:IS 15298(PART-2):2016, EN ISO 20345:2011 PROTECTION:ABRASION, FUEL OIL AND SLIP RESISTANT, ANTISKID, MILD ACID/ ALKALIES RESISTANT, HEAT RESISTANT SOLE HEAT RESISTANCE:RESISTANT TO HOT CONTACT UPTO 300°C FOR 1 MINUTE ELECTRICAL RESISTANCE:ANTISTATIC 100KOHM - 1000MOHM FINISH:ELEGANT AND SPRAY FINISH MARKING:STANDARD, LICENCE NO., BRAND NAME, SIZE, DATE OF MANUFACTURING, ETC ADDITIONAL INFORMATION:REFLECTOR AT HEEL AND BOTH SIDE PROFILE ADDITIONAL INFORMATION 1:TOE CAP WITH PADDING UNDER TOE CAP. PROTECTION AGAINST COMPRESSION INJURY UPTO 15KN Item Details : Delivery of Shoes required in Partial Quantity, in 9-10 Lots or depends on Sizes available. Vendor will be intimated prior to 45 Days of requirement. Only Manufacturer / Authorized Distributor or Channel Partner will be allowed. Test Certificate of the Safety Shoes required for the Delivered lot. Item Note : 4 33418441 0004 0004 300914273 SHOES,SAFETY,LA,VULCANIZED-RBR,5,CT Technical Details Name : amisha mistri Contact : Email : amisha.mistri@ext.amns.in 200 PAA SHOES,SAFETY TYPE:LOW ANKLE UPPER MATERIAL:WATER REPELLANT BUFF CG BARTON PRINT LEATHER THICKNESS (UPPER MATERIAL):2.0MM ± 0.2 MM SOLE MATERIAL:DIRECT VULCANIZE NITRILE RUBBER SOLE , SIZE:5 (UK) TOE CAP:200J IMPACT RESISTANT COMPOSITE TOE CAP COLLAR:PU FOAM PADDED CUSHIONED COLLAR TONGUE:PU FOAM PADDED BELOW TYPE TONGUE MADE OF LEATHER VAMP LINING:NON-WOVEN FELT LINING QUARTER AND TONGUE LINING:NON-WOVEN BREATHABLE TYPE LINING LAMINATED WITH 5MM PU FOAM GSM: 150 + 5% IN-SOCKS:ARCH SUPPORTED EVA MOULDED SOCKS LINED WITH FABRIC THICKNESS 3MM(MIN)AT FOREPART AND 5MM AT HEEL INSOLE:2.5MM THICK NON-WOVEN STROBLE INSOLE EYELETS:4 SETS OF METALLIC POWDER COATED EYELETS / D-RING LACES:80-100 CM NYLON LACE WITH BREAKING STRENGTH 50-60 KG THREAD:NYLON VARIETY H1 & L2 STANDARDS:IS 15298(PART-2):2016, EN ISO 20345:2011 PROTECTION:ABRASION, FUEL OIL AND SLIP RESISTANT, ANTISKID, MILD ACID/ ALKALIES RESISTANT, HEAT RESISTANT SOLE HEAT RESISTANCE:RESISTANT TO HOT CONTACT UPTO 300°C FOR 1 MINUTE ELECTRICAL RESISTANCE:ANTISTATIC 100KOHM - 1000MOHM FINISH:ELEGANT AND SPRAY FINISH MARKING:STANDARD, LICENCE NO., BRAND NAME, SIZE, DATE OF MANUFACTURING, ETC ADDITIONAL INFORMATION:REFLECTOR AT HEEL AND BOTH SIDE PROFILE ADDITIONAL INFORMATION 1:TOE CAP WITH PADDING UNDER TOE CAP. PROTECTION AGAINST COMPRESSION INJURY UPTO 15KN Item Details : Delivery of Shoes required in Partial Quantity, in 9-10 Lots or depends on Sizes available. Vendor will be intimated prior to 45 Days of requirement. Only Manufacturer / Authorized Distributor or Channel Partner will be allowed. Test Certificate of the Safety Shoes required for the Delivered lot. Item Note : Page 3 of 6 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000118032 Date 03.08.2024 Submission Date 13.08.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Ms. Heena Patel Contact Email HEENA.PATEL1@AMNS.IN MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Material / Service No. Quantity UOM Detail Description Other Details 5 33418441 0005 0005 300914268 SHOES,SAFETY,LA,VULCANIZED-RBR,6,CT Technical Details Name : amisha mistri Contact : Email : amisha.mistri@ext.amns.in 700 PAA SHOES,SAFETY TYPE:LOW ANKLE UPPER MATERIAL:WATER REPELLANT BUFF CG BARTON PRINT LEATHER THICKNESS (UPPER MATERIAL):2.0MM ± 0.2 MM SOLE MATERIAL:DIRECT VULCANIZE NITRILE RUBBER SOLE , SIZE:6 (UK) TOE CAP:200J IMPACT RESISTANT COMPOSITE TOE CAP COLLAR:PU FOAM PADDED CUSHIONED COLLAR TONGUE:PU FOAM PADDED BELOW TYPE TONGUE MADE OF LEATHER VAMP LINING:NON-WOVEN FELT LINING QUARTER AND TONGUE LINING:NON-WOVEN BREATHABLE TYPE LINING LAMINATED WITH 5MM PU FOAM GSM: 150 + 5% IN-SOCKS:ARCH SUPPORTED EVA MOULDED SOCKS LINED WITH FABRIC THICKNESS 3MM(MIN)AT FOREPART AND 5MM AT HEEL INSOLE:2.5MM THICK NON-WOVEN STROBLE INSOLE EYELETS:4 SETS OF METALLIC POWDER COATED EYELETS / D-RING LACES:80-100 CM NYLON LACE WITH BREAKING STRENGTH 50-60 KG THREAD:NYLON VARIETY H1 & L2 STANDARDS:IS 15298(PART-2):2016, EN ISO 20345:2011 PROTECTION:ABRASION, FUEL OIL AND SLIP RESISTANT, ANTISKID, MILD ACID/ ALKALIES RESISTANT, HEAT RESISTANT SOLE HEAT RESISTANCE:RESISTANT TO HOT CONTACT UPTO 300°C FOR 1 MINUTE ELECTRICAL RESISTANCE:ANTISTATIC 100KOHM - 1000MOHM FINISH:ELEGANT AND SPRAY FINISH MARKING:STANDARD, LICENCE NO., BRAND NAME, SIZE, DATE OF MANUFACTURING, ETC ADDITIONAL INFORMATION:REFLECTOR AT HEEL AND BOTH SIDE PROFILE ADDITIONAL INFORMATION 1:TOE CAP WITH PADDING UNDER TOE CAP. PROTECTION AGAINST COMPRESSION INJURY UPTO 15KN Item Details : Delivery of Shoes required in Partial Quantity, in 9-10 Lots or depends on Sizes available. Vendor will be intimated prior to 45 Days of requirement. Only Manufacturer / Authorized Distributor or Channel Partner will be allowed. Test Certificate of the Safety Shoes required for the Delivered lot. Item Note : 6 33418441 0006 0006 300914269 SHOES,SAFETY,LA,VULCANIZED-RBR,7,CT Technical Details Name : amisha mistri Contact : Email : amisha.mistri@ext.amns.in 2,100 PAA SHOES,SAFETY TYPE:LOW ANKLE UPPER MATERIAL:WATER REPELLANT BUFF CG BARTON PRINT LEATHER THICKNESS (UPPER MATERIAL):2.0MM ± 0.2 MM SOLE MATERIAL:DIRECT VULCANIZE NITRILE RUBBER SOLE , SIZE:7 (UK) TOE CAP:200J IMPACT RESISTANT COMPOSITE TOE CAP COLLAR:PU FOAM PADDED CUSHIONED COLLAR TONGUE:PU FOAM PADDED BELOW TYPE TONGUE MADE OF LEATHER VAMP LINING:NON-WOVEN FELT LINING QUARTER AND TONGUE LINING:NON-WOVEN BREATHABLE TYPE LINING LAMINATED WITH 5MM PU FOAM GSM: 150 + 5% IN-SOCKS:ARCH SUPPORTED EVA MOULDED SOCKS LINED WITH FABRIC THICKNESS 3MM(MIN)AT FOREPART AND 5MM AT HEEL INSOLE:2.5MM THICK NON-WOVEN STROBLE INSOLE EYELETS:4 SETS OF METALLIC POWDER COATED EYELETS / D-RING LACES:80-100 CM NYLON LACE WITH BREAKING STRENGTH 50-60 KG THREAD:NYLON VARIETY H1 & L2 STANDARDS:IS 15298(PART-2):2016, EN ISO 20345:2011 PROTECTION:ABRASION, FUEL OIL AND SLIP RESISTANT, ANTISKID, MILD ACID/ ALKALIES RESISTANT, HEAT RESISTANT SOLE HEAT RESISTANCE:RESISTANT TO HOT CONTACT UPTO 300°C FOR 1 MINUTE ELECTRICAL RESISTANCE:ANTISTATIC 100KOHM - 1000MOHM FINISH:ELEGANT AND SPRAY FINISH MARKING:STANDARD, LICENCE NO., BRAND NAME, SIZE, DATE OF MANUFACTURING, ETC ADDITIONAL INFORMATION:REFLECTOR AT HEEL AND BOTH SIDE PROFILE ADDITIONAL INFORMATION 1:TOE CAP WITH PADDING UNDER TOE CAP. PROTECTION AGAINST COMPRESSION INJURY UPTO 15KN Item Details : Delivery of Shoes required in Partial Quantity, in 9-10 Lots or depends on Sizes available. Vendor will be intimated prior to 45 Days of requirement. Only Manufacturer / Authorized Distributor or Channel Partner will be allowed. Test Certificate of the Safety Shoes required for the Delivered lot. Item Note : Page 4 of 6 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000118032 Date 03.08.2024 Submission Date 13.08.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Ms. Heena Patel Contact Email HEENA.PATEL1@AMNS.IN MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Material / Service No. Quantity UOM Detail Description Other Details 7 33418441 0007 0007 300914272 SHOES,SAFETY,LA,VULCANIZED-RBR,8,CT Technical Details Name : amisha mistri Contact : Email : amisha.mistri@ext.amns.in 3,800 PAA SHOES,SAFETY TYPE:LOW ANKLE UPPER MATERIAL:WATER REPELLANT BUFF CG BARTON PRINT LEATHER THICKNESS (UPPER MATERIAL):2.0MM ± 0.2 MM SOLE MATERIAL:DIRECT VULCANIZE NITRILE RUBBER SOLE , SIZE:8 (UK) TOE CAP:200J IMPACT RESISTANT COMPOSITE TOE CAP COLLAR:PU FOAM PADDED CUSHIONED COLLAR TONGUE:PU FOAM PADDED BELOW TYPE TONGUE MADE OF LEATHER VAMP LINING:NON-WOVEN FELT LINING QUARTER AND TONGUE LINING:NON-WOVEN BREATHABLE TYPE LINING LAMINATED WITH 5MM PU FOAM GSM: 150 + 5% IN-SOCKS:ARCH SUPPORTED EVA MOULDED SOCKS LINED WITH FABRIC THICKNESS 3MM(MIN)AT FOREPART AND 5MM AT HEEL INSOLE:2.5MM THICK NON-WOVEN STROBLE INSOLE EYELETS:4 SETS OF METALLIC POWDER COATED EYELETS / D-RING LACES:80-100 CM NYLON LACE WITH BREAKING STRENGTH 50-60 KG THREAD:NYLON VARIETY H1 & L2 STANDARDS:IS 15298(PART-2):2016, EN ISO 20345:2011 PROTECTION:ABRASION, FUEL OIL AND SLIP RESISTANT, ANTISKID, MILD ACID/ ALKALIES RESISTANT, HEAT RESISTANT SOLE HEAT RESISTANCE:RESISTANT TO HOT CONTACT UPTO 300°C FOR 1 MINUTE ELECTRICAL RESISTANCE:ANTISTATIC 100KOHM - 1000MOHM FINISH:ELEGANT AND SPRAY FINISH MARKING:STANDARD, LICENCE NO., BRAND NAME, SIZE, DATE OF MANUFACTURING, ETC ADDITIONAL INFORMATION:REFLECTOR AT HEEL AND BOTH SIDE PROFILE ADDITIONAL INFORMATION 1:TOE CAP WITH PADDING UNDER TOE CAP. PROTECTION AGAINST COMPRESSION INJURY UPTO 15KN Item Details : Delivery of Shoes required in Partial Quantity, in 9-10 Lots or depends on Sizes available. Vendor will be intimated prior to 45 Days of requirement. Only Manufacturer / Authorized Distributor or Channel Partner will be allowed. Test Certificate of the Safety Shoes required for the Delivered lot. Item Note : 8 33418441 0008 0008 300914275 SHOES,SAFETY,LA,VULCANIZED-RBR,9,CT Technical Details Name : amisha mistri Contact : Email : amisha.mistri@ext.amns.in 2,700 PAA SHOES,SAFETY TYPE:LOW ANKLE UPPER MATERIAL:WATER REPELLANT BUFF CG BARTON PRINT LEATHER THICKNESS (UPPER MATERIAL):2.0MM ± 0.2 MM SOLE MATERIAL:DIRECT VULCANIZE NITRILE RUBBER SOLE , SIZE:9 (UK) TOE CAP:200J IMPACT RESISTANT COMPOSITE TOE CAP COLLAR:PU FOAM PADDED CUSHIONED COLLAR TONGUE:PU FOAM PADDED BELOW TYPE TONGUE MADE OF LEATHER VAMP LINING:NON-WOVEN FELT LINING QUARTER AND TONGUE LINING:NON-WOVEN BREATHABLE TYPE LINING LAMINATED WITH 5MM PU FOAM GSM: 150 + 5% IN-SOCKS:ARCH SUPPORTED EVA MOULDED SOCKS LINED WITH FABRIC THICKNESS 3MM(MIN)AT FOREPART AND 5MM AT HEEL INSOLE:2.5MM THICK NON-WOVEN STROBLE INSOLE EYELETS:4 SETS OF METALLIC POWDER COATED EYELETS / D-RING LACES:80-100 CM NYLON LACE WITH BREAKING STRENGTH 50-60 KG THREAD:NYLON VARIETY H1 & L2 STANDARDS:IS 15298(PART-2):2016, EN ISO 20345:2011 PROTECTION:ABRASION, FUEL OIL AND SLIP RESISTANT, ANTISKID, MILD ACID/ ALKALIES RESISTANT, HEAT RESISTANT SOLE HEAT RESISTANCE:RESISTANT TO HOT CONTACT UPTO 300°C FOR 1 MINUTE ELECTRICAL RESISTANCE:ANTISTATIC 100KOHM - 1000MOHM FINISH:ELEGANT AND SPRAY FINISH MARKING:STANDARD, LICENCE NO., BRAND NAME, SIZE, DATE OF MANUFACTURING, ETC ADDITIONAL INFORMATION:REFLECTOR AT HEEL AND BOTH SIDE PROFILE ADDITIONAL INFORMATION 1:TOE CAP WITH PADDING UNDER TOE CAP. PROTECTION AGAINST COMPRESSION INJURY UPTO 15KN Item Details : Delivery of Shoes required in Partial Quantity, in 9-10 Lots or depends on Sizes available. Vendor will be intimated prior to 45 Days of requirement. Only Manufacturer / Authorized Distributor or Channel Partner will be allowed. Test Certificate of the Safety Shoes required for the Delivered lot. Item Note : Page 5 of 6 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000118032 Date 03.08.2024 Submission Date 13.08.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Ms. Heena Patel Contact Email HEENA.PATEL1@AMNS.IN MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Material / Service No. Quantity UOM Detail Description Other Details 9 33418441 0009 0009 300914277 SHOES,SAFETY,LA,VULCANIZED-RBR,10,CT Technical Details Name : amisha mistri Contact : Email : amisha.mistri@ext.amns.in 1,000 PAA SHOES,SAFETY TYPE:LOW ANKLE UPPER MATERIAL:WATER REPELLANT BUFF CG BARTON PRINT LEATHER THICKNESS (UPPER MATERIAL):2.0MM ± 0.2 MM SOLE MATERIAL:DIRECT VULCANIZE NITRILE RUBBER SOLE , SIZE:10 (UK) TOE CAP:200J IMPACT RESISTANT COMPOSITE TOE CAP COLLAR:PU FOAM PADDED CUSHIONED COLLAR TONGUE:PU FOAM PADDED BELOW TYPE TONGUE MADE OF LEATHER VAMP LINING:NON-WOVEN FELT LINING QUARTER AND TONGUE LINING:NON-WOVEN BREATHABLE TYPE LINING LAMINATED WITH 5MM PU FOAM GSM: 150 + 5% IN-SOCKS:ARCH SUPPORTED EVA MOULDED SOCKS LINED WITH FABRIC THICKNESS 3MM(MIN)AT FOREPART AND 5MM AT HEEL INSOLE:2.5MM THICK NON-WOVEN STROBLE INSOLE EYELETS:4 SETS OF METALLIC POWDER COATED EYELETS / D-RING LACES:80-100 CM NYLON LACE WITH BREAKING STRENGTH 50-60 KG THREAD:NYLON VARIETY H1 & L2 STANDARDS:IS 15298(PART-2):2016, EN ISO 20345:2011 PROTECTION:ABRASION, FUEL OIL AND SLIP RESISTANT, ANTISKID, MILD ACID/ ALKALIES RESISTANT, HEAT RESISTANT SOLE HEAT RESISTANCE:RESISTANT TO HOT CONTACT UPTO 300°C FOR 1 MINUTE ELECTRICAL RESISTANCE:ANTISTATIC 100KOHM - 1000MOHM FINISH:ELEGANT AND SPRAY FINISH MARKING:STANDARD, LICENCE NO., BRAND NAME, SIZE, DATE OF MANUFACTURING, ETC ADDITIONAL INFORMATION:REFLECTOR AT HEEL AND BOTH SIDE PROFILE ADDITIONAL INFORMATION 1:TOE CAP WITH PADDING UNDER TOE CAP. PROTECTION AGAINST COMPRESSION INJURY UPTO 15KN Item Details : Delivery of Shoes required in Partial Quantity, in 9-10 Lots or depends on Sizes available. Vendor will be intimated prior to 45 Days of requirement. Only Manufacturer / Authorized Distributor or Channel Partner will be allowed. Test Certificate of the Safety Shoes required for the Delivered lot. Item Note : 10 33418441 0010 0010 300914279 SHOES,SAFETY,LA,VULCANIZED-RBR,11,CT Technical Details Name : amisha mistri Contact : Email : amisha.mistri@ext.amns.in 250 PAA SHOES,SAFETY TYPE:LOW ANKLE UPPER MATERIAL:WATER REPELLANT BUFF CG BARTON PRINT LEATHER THICKNESS (UPPER MATERIAL):2.0MM ± 0.2 MM SOLE MATERIAL:DIRECT VULCANIZE NITRILE RUBBER SOLE , SIZE:11 (UK) TOE CAP:200J IMPACT RESISTANT COMPOSITE TOE CAP COLLAR:PU FOAM PADDED CUSHIONED COLLAR TONGUE:PU FOAM PADDED BELOW TYPE TONGUE MADE OF LEATHER VAMP LINING:NON-WOVEN FELT LINING QUARTER AND TONGUE LINING:NON-WOVEN BREATHABLE TYPE LINING LAMINATED WITH 5MM PU FOAM GSM: 150 + 5% IN-SOCKS:ARCH SUPPORTED EVA MOULDED SOCKS LINED WITH FABRIC THICKNESS 3MM(MIN)AT FOREPART AND 5MM AT HEEL INSOLE:2.5MM THICK NON-WOVEN STROBLE INSOLE EYELETS:4 SETS OF METALLIC POWDER COATED EYELETS / D-RING LACES:80-100 CM NYLON LACE WITH BREAKING STRENGTH 50-60 KG THREAD:NYLON VARIETY H1 & L2 STANDARDS:IS 15298(PART-2):2016, EN ISO 20345:2011 PROTECTION:ABRASION, FUEL OIL AND SLIP RESISTANT, ANTISKID, MILD ACID/ ALKALIES RESISTANT, HEAT RESISTANT SOLE HEAT RESISTANCE:RESISTANT TO HOT CONTACT UPTO 300°C FOR 1 MINUTE ELECTRICAL RESISTANCE:ANTISTATIC 100KOHM - 1000MOHM FINISH:ELEGANT AND SPRAY FINISH MARKING:STANDARD, LICENCE NO., BRAND NAME, SIZE, DATE OF MANUFACTURING, ETC ADDITIONAL INFORMATION:REFLECTOR AT HEEL AND BOTH SIDE PROFILE ADDITIONAL INFORMATION 1:TOE CAP WITH PADDING UNDER TOE CAP. PROTECTION AGAINST COMPRESSION INJURY UPTO 15KN Item Details : Delivery of Shoes required in Partial Quantity, in 9-10 Lots or depends on Sizes available. Vendor will be intimated prior to 45 Days of requirement. Only Manufacturer / Authorized Distributor or Channel Partner will be allowed. Test Certificate of the Safety Shoes required for the Delivered lot. Item Note : Page 6 of 6 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000118032 Date 03.08.2024 Submission Date 13.08.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Ms. Heena Patel Contact Email HEENA.PATEL1@AMNS.IN MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Material / Service No. Quantity UOM Detail Description Other Details 11 33418441 0011 0011 300914280 SHOES,SAFETY,LA,VULCANIZED-RBR,12,CT Technical Details Name : amisha mistri Contact : Email : amisha.mistri@ext.amns.in 40 PAA SHOES,SAFETY TYPE:LOW ANKLE UPPER MATERIAL:WATER REPELLANT BUFF CG BARTON PRINT LEATHER THICKNESS (UPPER MATERIAL):2.0MM ± 0.2 MM SOLE MATERIAL:DIRECT VULCANIZE NITRILE RUBBER SOLE , SIZE:12 (UK) TOE CAP:200J IMPACT RESISTANT COMPOSITE TOE CAP COLLAR:PU FOAM PADDED CUSHIONED COLLAR TONGUE:PU FOAM PADDED BELOW TYPE TONGUE MADE OF LEATHER VAMP LINING:NON-WOVEN FELT LINING QUARTER AND TONGUE LINING:NON-WOVEN BREATHABLE TYPE LINING LAMINATED WITH 5MM PU FOAM GSM: 150 + 5% IN-SOCKS:ARCH SUPPORTED EVA MOULDED SOCKS LINED WITH FABRIC THICKNESS 3MM(MIN)AT FOREPART AND 5MM AT HEEL INSOLE:2.5MM THICK NON-WOVEN STROBLE INSOLE EYELETS:4 SETS OF METALLIC POWDER COATED EYELETS / D-RING LACES:80-100 CM NYLON LACE WITH BREAKING STRENGTH 50-60 KG THREAD:NYLON VARIETY H1 & L2 STANDARDS:IS 15298(PART-2):2016, EN ISO 20345:2011 PROTECTION:ABRASION, FUEL OIL AND SLIP RESISTANT, ANTISKID, MILD ACID/ ALKALIES RESISTANT, HEAT RESISTANT SOLE HEAT RESISTANCE:RESISTANT TO HOT CONTACT UPTO 300°C FOR 1 MINUTE ELECTRICAL RESISTANCE:ANTISTATIC 100KOHM - 1000MOHM FINISH:ELEGANT AND SPRAY FINISH MARKING:STANDARD, LICENCE NO., BRAND NAME, SIZE, DATE OF MANUFACTURING, ETC ADDITIONAL INFORMATION:REFLECTOR AT HEEL AND BOTH SIDE PROFILE ADDITIONAL INFORMATION 1:TOE CAP WITH PADDING UNDER TOE CAP. PROTECTION AGAINST COMPRESSION INJURY UPTO 15KN Item Details : Delivery of Shoes required in Partial Quantity, in 9-10 Lots or depends on Sizes available. Vendor will be intimated prior to 45 Days of requirement. Only Manufacturer / Authorized Distributor or Channel Partner will be allowed. Test Certificate of the Safety Shoes required for the Delivered lot. Item Note : 12 33418441 0012 0012 300914283 SHOES,SAFETY,LA,VULCANIZED-RBR,13,CT Technical Details Name : amisha mistri Contact : Email : amisha.mistri@ext.amns.in 5 PAA SHOES,SAFETY TYPE:LOW ANKLE UPPER MATERIAL:WATER REPELLANT BUFF CG BARTON PRINT LEATHER THICKNESS (UPPER MATERIAL):2.0MM ± 0.2 MM SOLE MATERIAL:DIRECT VULCANIZE NITRILE RUBBER SOLE , SIZE:13 (UK) TOE CAP:200J IMPACT RESISTANT COMPOSITE TOE CAP COLLAR:PU FOAM PADDED CUSHIONED COLLAR TONGUE:PU FOAM PADDED BELOW TYPE TONGUE MADE OF LEATHER VAMP LINING:NON-WOVEN FELT LINING QUARTER AND TONGUE LINING:NON-WOVEN BREATHABLE TYPE LINING LAMINATED WITH 5MM PU FOAM GSM: 150 + 5% IN-SOCKS:ARCH SUPPORTED EVA MOULDED SOCKS LINED WITH FABRIC THICKNESS 3MM(MIN)AT FOREPART AND 5MM AT HEEL INSOLE:2.5MM THICK NON-WOVEN STROBLE INSOLE EYELETS:4 SETS OF METALLIC POWDER COATED EYELETS / D-RING LACES:80-100 CM NYLON LACE WITH BREAKING STRENGTH 50-60 KG THREAD:NYLON VARIETY H1 & L2 STANDARDS:IS 15298(PART-2):2016, EN ISO 20345:2011 PROTECTION:ABRASION, FUEL OIL AND SLIP RESISTANT, ANTISKID, MILD ACID/ ALKALIES RESISTANT, HEAT RESISTANT SOLE HEAT RESISTANCE:RESISTANT TO HOT CONTACT UPTO 300°C FOR 1 MINUTE ELECTRICAL RESISTANCE:ANTISTATIC 100KOHM - 1000MOHM FINISH:ELEGANT AND SPRAY FINISH MARKING:STANDARD, LICENCE NO., BRAND NAME, SIZE, DATE OF MANUFACTURING, ETC ADDITIONAL INFORMATION:REFLECTOR AT HEEL AND BOTH SIDE PROFILE ADDITIONAL INFORMATION 1:TOE CAP WITH PADDING UNDER TOE CAP. PROTECTION AGAINST COMPRESSION INJURY UPTO 15KN Item Details : Delivery of Shoes required in Partial Quantity, in 9-10 Lots or depends on Sizes available. Vendor will be intimated prior to 45 Days of requirement. Only Manufacturer / Authorized Distributor or Channel Partner will be allowed. Test Certificate of the Safety Shoes required for the Delivered lot
