Supply Of Ball Valve (Fire Safe, Non-Fire Safe) For Msb, Pfcc, Gds Unit For Nrep As Per Technical Specifications For Numaligarh Refinery Limited, Assam, India. , Group -1(Group-Wise Evaluation) Supply Of Ball Valve Fire Safe ( Cast Carbon Steel ) For Nrep Project Incuding Tpi Charges As Specified In Material Requisition. , Ball Valve Cs (Nace+Caustic), 150,0, Api 608, Flgd,B16.5,Rf, Lo, Full Bore, Bb, Fire Safe, Long Pattern, With Locking Arrangement, All Welds Shall Be Subjected, To Pwht., Servicenace, Category 1, A105n/A216 Gr.Wcb, A182 F316 /A351 Cf8m, Stemss 316, Rtfe, Sealflexible Graphite, A193grb7m/A194 Gr2hm, Springs Inconel X-750, Supp. Requirements, Valve Bore Shall Be Full Bore For 1/2 To, 11/2And Single Reduced Bore For 2 & Above, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005,Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0008,Tk-1Zzza-Pi-Spe-0009, And In-042, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043, Vendor To Submitpressure-Temp., Rating Chart, Design Pressure16.5 Kg/Cm2(G), Design Temperature120 Deg.C, Valve Shall Have 120Mm Extended Spindle, (Measured From The Valve Bonnet) To Ensure, That The Lever Clears Valve Insulation., For Trunnion Mounted Valves Sealant /, Lubricant / Flushing Injection S, Assemblies Shall Be Provided For The, And Or Stem Seal. Refer Clause B.5.16 Of, Tk-1Zzza-Pi-Spe-0009., Valve Shall Be Suitable For, Bi-Directional Flow & Pressure Shutoff, Valve Shall Be Tested In Preferred And, Non Preferred Flow Direction., Preferred Flow Direction Shall Be Marked. , Ball Valve Cs (Nace+Caustic), 150,0, Api 608, Flgd,B16.5,Rf, Lo, Full Bore, Bb, Fire Safe, Long Pattern, With Locking Arrangement, All Welds Shall Be Subjected, To Pwht., Servicenace, Category 1, A105n/A216 Gr.Wcb, A182 F316 /A351 Cf8m, Stem Ss 316, Rtfe, Seal Flexible Graphite, A193grb7m/A194 Gr2hm, Springs Inconel X-750, Supp. Requirements, Valve Bore Shall Be Full Bore For 1/2 To, 11/2And Single Reduced Bore For 2 & Above, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005,Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0008,Tk-1Zzza-Pi-Spe-0009, And In-042, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043, Vendor To Submitpressure-Temp., Rating Chart, Design Pressure16.5 Kg/Cm2(G), Design Temperature120 Deg.C, Valve Shall Have 120Mm Extended Spindle, (Measured From The Valve Bonnet) To Ensure, That The Lever Clears Valve Insulation., For Trunnion Mounted Valves Sealant /, Lubricant / Flushing Injection S, Assemblies Shall Be Provided For The, And Or Stem Seal. Refer Clause B.5.16 Of, Tk-1Zzza-Pi-Spe-0009., Valve Shall Be Suitable For, Bi-Directional Flow & Pressure Shutoff, Valve Shall Be Tested In Preferred And, Non Preferred Flow Direction., Preferred Flow Direction Shall Be Marked. , Ball Valve Cs (Nace+Caustic), 150,0, Api 608, Flgd,B16.5,Rf, Lo, Full Bore, Bb, Fire Safe, Long Pattern, With Locking Arrangement, All Welds Shall Be Subjected, To Pwht., Servicenace, Category 1, A105n/A216 Gr.Wcb, A182 F316 /A351 Cf8m, Stem Ss 316, Rtfe, Seal Flexible Graphite, A193grb7m/A194 Gr2hm, Springs Inconel X-750, Supp. Requirements, Valve Bore Shall Be Full Bore For 1/2 To, 11/2And Single Reduced Bore For 2 & Above, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005,Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0008,Tk-1Zzza-Pi-Spe-0009, And In-042, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043, Vendor To Submitpressure-Temp., Rating Chart, Design Pressure16.5 Kg/Cm2(G), Design Temperature120 Deg.C, Valve Shall Have 120Mm Extended Spindle, (Measured From The Valve Bonnet) To Ensure, That The Lever Clears Valve Insulation., For Trunnion Mounted Valves Sealant /, Lubricant / Flushing Injection S, Assemblies Shall Be Provided For The, And Or Stem Seal. Refer Clause B.5.16 Of, Tk-1Zzza-Pi-Spe-0009., Valve Shall Be Suitable For, Bi-Directional Flow & Pressure Shutoff, Valve Shall Be Tested In Preferred And, Non Preferred Flow Direction., Preferred Flow Direction Shall Be Marked. , Ball Valve Cs (Nace), 300,0, Api 608, Flgd,B16.5,Rf, Lo, Full Bore, Bb, Fire Safe, Long Pattern, With Locking Arrangement, All Welds Shall Be Subjected, To Pwht., Servicenace, Category 1, A105n/A216 Gr.Wcb, A182 F316 /A351 Cf8m, Stemss 316, Rtfe, Seal Flexible Graphite, A193grb7m/A194 Gr2hm, Springsinconel X-750, Supp. Requirements, Valve Bore Shall Be Full Bore For 1/2 To, 11/2And Single Reduced Bore For 2 & Above, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005,Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0008,Tk-1Zzza-Pi-Spe-0009, And In-042, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043, Vendor To Submitpressure-Temp., Rating Chart, Design Pressure35 Kg/Cm2(G), Design Temperature70 Deg.C, Valve Shall Have 120Mm Extended Spindle, (Measured From The Valve Bonnet) To Ensure, That The Lever Clears Valve Insulation., For Trunnion Mounted Valves Sealant /, Lubricant / Flushing Injection S, Assemblies Shall Be Provided For The, And Or Stem Seal. Refer Clause B.5.16 Of, Tk-1Zzza-Pi-Spe-0009., Valve Shall Be Suitable For, Bi-Directional Flow & Pressure Shutoff, Valve Shall Be Tested In Preferred And, Non Preferred Flow Direction., Preferred Flow Direction Shall Be Marked. , Ball Valve Cs (Nace+Caustic), 300,0, Api 608, Flgd,B16.5,Rf, Lo, Full Bore, Bb, Fire Safe, Long Pattern, With Locking Arrangement, All Welds Shall Be Subjected, To Pwht., Servicenace, Category 1, A105n/A216 Gr.Wcb, A182 F316 /A351 Cf8m, Stemss 316, Rtfe, Seal Flexible Graphite, A193grb7m/A194 Gr2hm, Springs Inconel X-750, Supp. Requirements, Valve Bore Shall Be Full Bore For 1/2 To, 11/2And Single Reduced Bore For 2 & Above, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005,Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0008,Tk-1Zzza-Pi-Spe-0009, And In-042, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043, Vendor To Submitpressure-Temp., Rating Chart, Design Pressure35 Kg/Cm2(G), Design Temperature120 Deg.C, Valve Shall Have 120Mm Extended Spindle, (Measured From The Valve Bonnet) To Ensure, That The Lever Clears Valve Insulation., For Trunnion Mounted Valves Sealant /, Lubricant / Flushing Injection S, Assemblies Shall Be Provided For The, And Or Stem Seal. Refer Clause B.5.16 Of, Tk-1Zzza-Pi-Spe-0009., Valve Shall Be Suitable For, Bi-Directional Flow & Pressure Shutoff, Valve Shall Be Tested In Preferred And, Non Preferred Flow Direction., Preferred Flow Direction Shall Be Marked. , Ball Valve Cs (Nace+Caustic), 300,0, Api 608, Flgd,B16.5,Rf, Lo, Full Bore, Bb, Fire Safe, Long Pattern, With Locking Arrangement, All Welds Shall Be Subjected, To Pwht., Servicenace, Category 1, A105n/A216 Gr.Wcb, A182 F316 /A351 Cf8m, Stemss 316, Rtfe, Seal Flexible Graphite, A193grb7m/A194 Gr2hm, Springsinconel X-750, Supp. Requirements, Valve Bore Shall Be Full Bore For 1/2 To, 11/2And Single Reduced Bore For 2 & Above, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005,Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0008,Tk-1Zzza-Pi-Spe-0009, And In-042, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043, Vendor To Submitpressure-Temp., Rating Chart, Design Pressure35 Kg/Cm2(G), Design Temperature120 Deg.C, Valve Shall Have 120Mm Extended Spindle, (Measured From The Valve Bonnet) To Ensure, That The Lever Clears Valve Insulation., For Trunnion Mounted Valves Sealant /, Lubricant / Flushing Injection S, Assemblies Shall Be Provided For The, And Or Stem Seal. Refer Clause B.5.16 Of, Tk-1Zzza-Pi-Spe-0009., Valve Shall Be Suitable For, Bi-Directional Flow & Pressure Shutoff, Valve Shall Be Tested In Preferred And, Non Preferred Flow Direction., Preferred Flow Direction Shall Be Marked. , Ball Valve Cs (Nace+Caustic), 300,0, Api 608, Flgd,B16.5,Rf, Lo, Full Bore, Bb, Fire Safe, Long Pattern, With Locking Arrangement, All Welds Shall Be Subjected, To Pwht., Servicenace, Category 1, A105n/A216 Gr.Wcb, A182 F316 /A351 Cf8m, Stemss 316, Rtfe, Sealflexible Graphite, A193grb7m/A194 Gr2hm, Springsinconel X-750, Supp. Requirements, Valve Bore Shall Be Full Bore For 1/2 To, 11/2And Single Reduced Bore For 2 & Above, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005,Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0008,Tk-1Zzza-Pi-Spe-0009, And In-042, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043, Vendor To Submitpressure-Temp., Rating Chart, Design Pressure35 Kg/Cm2(G), Design Temperature120 Deg.C, Valve Shall Have 120Mm Extended Spindle, (Measured From The Valve Bonnet) To Ensure, That The Lever Clears Valve Insulation., For Trunnion Mounted Valves Sealant /, Lubricant / Flushing Injection S, Assemblies Shall Be Provided For The, And Or Stem Seal. Refer Clause B.5.16 Of, Tk-1Zzza-Pi-Spe-0009., Valve Shall Be Suitable For, Bi-Directional Flow & Pressure Shutoff, Valve Shall Be Tested In Preferred And, Non Preferred Flow Direction., Preferred Flow Direction Shall Be Marked. , Ball Valve Cs(Ibr), 300,0, Api 608, Flgd,B16.5, Rf, Lo, Full Bore, Bb, Fire Safe, Long Pattern, A105n/A216 Gr.Wcb, A182 F316/A351 Cf8m, Stem Ss 316, Ss 316, Flexible Graphite, A193gr.B7/A194gr.2H, Springsinconel X-750, Supp. Requirements, Valve Bore Shall Be Full Bore For 1/2 To, 11/2And Single Reduced Bore For 2 & Above, Add. Information, Ibr Certificate As Per Specification, For Valves., Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005,Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0008,Tk-1Zzza-Pi-Spe-0009, And In-042, Design Pressure18.5 Kg/Cm2(G), Design Temperature200 Deg.C, Valve Shall Have 120Mm Extended Spindle, (Measured From The Valve Bonnet) To Ensure, That The Lever Clears Valve Insulation., For Trunnion Mounted Valves Sealant /, Lubricant / Flushing Injection S, Assemblies Shall Be Provided For The, And Or Stem Seal. Refer Clause B.5.16 Of, Tk-1Zzza-Pi-Spe-0009., Valve Shall Be Suitable For, Bi-Directional Flow & Pressure Shutoff, Valve Shall Be Tested In Preferred And, Non Preferred Flow Direction., Preferred Flow Direction Shall Be Marked. , Group -2(Group-Wise Evaluation) Supply Ofball Non Fire Safe ( Cast Carbon Steel - Int Coated)For Nrep Project Incuding Tpi Charges As Specified In Material Requisition. , Ball Valve Cs Int. Coated, 150,0, Api 608, Flgd,B16.5,Ff, Go, Single Reduced Bore, Bb, Long Pattern, With Locking Arrangement, A105n/A216 Gr.Wcb, A182 F304 /A351 Cf8, Stem Ss 304, Rtfe, Sealflexible Graphite, A193 Gr.B7/A194gr.2H, Springsinconel X-750, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005,Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0008,Tk-1Zzza-Pi-Spe-0009, And In-042, Internally Liquid Epoxy Coated Acc. To, Doc. Nr-0Zzzz-Cv-Spe-0019, Vendor To Submitpressure-Temp., Rating Chart, Design Pressure15 Kg/Cm2(G), Design Temperature65 Deg.C, Valve Shall Have 120Mm Extended Spindle, (Measured From The Valve Bonnet) To Ensure, That The Lever Clears Valve Insulation., For Trunnion Mounted Valves Sealant /, Lubricant / Flushing Injection S, Assemblies Shall Be Provided For The, And Or Stem Seal. Refer Clause B.5.16 Of, Tk-1Zzza-Pi-Spe-0009., Valve Shall Be Suitable For, Bi-Directional Flow & Pressure Shutoff, Valve Shall Be Tested In Preferred And, Non Preferred Flow Direction., Preferred Flow Direction Shall Be Marked. , Ball Valve Cs Int. Coated, 150,0, Api 608, Flgd,B16.5,Ff, Lo, Full Bore, Bb, Long Pattern, With Locking Arrangement, A105n/A216 Gr.Wcb, A182 F304 /A351 Cf8, Stemss 304, Rtfe, Seal Flexible Graphite, A193 Gr.B7/A194gr.2H, Springs Inconel X-750, Supp. Requirements, Valve Bore Shall Be Full Bore For 1/2 To, 11/2And Single Reduced Bore For 2 & Above, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005,Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0008,Tk-1Zzza-Pi-Spe-0009, And In-042, Internally Liquid Epoxy Coated Acc. To, Doc. Nr-0Zzzz-Cv-Spe-0019, Vendor To Submitpressure-Temp., Rating Chart, Design Pressure15 Kg/Cm2(G), Design Temperature65 Deg.C, Valve Shall Have 120Mm Extended Spindle, (Measured From The Valve Bonnet) To Ensure, That The Lever Clears Valve Insulation., For Trunnion Mounted Valves Sealant /, Lubricant / Flushing Injection S, Assemblies Shall Be Provided For The, And Or Stem Seal. Refer Clause B.5.16 Of, Tk-1Zzza-Pi-Spe-0009., Valve Shall Be Suitable For, Bi-Directional Flow & Pressure Shutoff, Valve Shall Be Tested In Preferred And, Non Preferred Flow Direction., Preferred Flow Direction Shall Be Marked. , Ball Valve Cs Int. Coated, 150,0, Api 608, Flgd,B16.5,Ff, Lo, Full Bore, Bb, Long Pattern, With Locking Arrangement, A105n/A216 Gr.Wcb, A182 F304 /A351 Cf8, Stemss 304, Rtfe, Sealflexible Graphite, A193 Gr.B7/A194gr.2H, Springsinconel X-750, Supp. Requirements, Valve Bore Shall Be Full Bore For 1/2 To, 11/2And Single Reduced Bore For 2 & Above, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005,Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0008,Tk-1Zzza-Pi-Spe-0009, And In-042, Internally Liquid Epoxy Coated Acc. To, Doc. Nr-0Zzzz-Cv-Spe-0019, Vendor To Submitpressure-Temp., Rating Chart, Design Pressure15 Kg/Cm2(G), Design Temperature65 Deg.C, Valve Shall Have 120Mm Extended Spindle, (Measured From The Valve Bonnet) To Ensure, That The Lever Clears Valve Insulation., For Trunnion Mounted Valves Sealant /, Lubricant / Flushing Injection S, Assemblies Shall Be Provided For The, And Or Stem Seal. Refer Clause B.5.16 Of, Tk-1Zzza-Pi-Spe-0009., Valve Shall Be Suitable For, Bi-Directional Flow & Pressure Shutoff, Valve Shall Be Tested In Preferred And, Non Preferred Flow Direction., Preferred Flow Direction Shall Be Marked. , Ball Valve Cs Int. Coated, 150,0, Api 608, Flgd,B16.5,Ff, Lo, Full Bore, Bb, Long Pattern, With Locking Arrangement, A105n/A216 Gr.Wcb, A182 F304 /A351 Cf8, Stem Ss 304, Rtfe, Sealflexible Graphite, A193 Gr.B7/A194gr.2H, Springsinconel X-750, Supp. Requirements, Valve Bore Shall Be Full Bore For 1/2 To, 11/2And Single Reduced Bore For 2 & Above, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005,Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0008,Tk-1Zzza-Pi-Spe-0009, And In-042, Internally Liquid Epoxy Coated Acc. To, Doc. Nr-0Zzzz-Cv-Spe-0019, Vendor To Submitpressure-Temp., Rating Chart, Design Pressure15 Kg/Cm2(G), Design Temperature65 Deg.C, Valve Shall Have 120Mm Extended Spindle, (Measured From The Valve Bonnet) To Ensure, That The Lever Clears Valve Insulation., For Trunnion Mounted Valves Sealant /, Lubricant / Flushing Injection S, Assemblies Shall Be Provided For The, And Or Stem Seal. Refer Clause B.5.16 Of, Tk-1Zzza-Pi-Spe-0009., Valve Shall Be Suitable For, Bi-Directional Flow & Pressure Shutoff, Valve Shall Be Tested In Preferred And, Non Preferred Flow Direction., Preferred Flow Direction Shall Be Marked. , Ball Valve Cs Int. Coated, 150,0, Api 608, Flgd,B16.5,Ff, Lo, Full Bore, Bb, Long Pattern, With Locking Arrangement, A105n/A216 Gr.Wcb, A182 F304 /A351 Cf8, Stemss 304, Rtfe, Seal Flexible Graphite, A193 Gr.B7/A194gr.2H, Springsinconel X-750, Supp. Requirements, Valve Bore Shall Be Full Bore For 1/2 To, 11/2And Single Reduced Bore For 2 & Above, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005,Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0008,Tk-1Zzza-Pi-Spe-0009, And In-042, Internally Liquid Epoxy Coated Acc. To, Doc. Nr-0Zzzz-Cv-Spe-0019, Vendor To Submitpressure-Temp., Rating Chart, Design Pressure15 Kg/Cm2(G), Design Temperature65 Deg.C, Valve Shall Have 120Mm Extended Spindle, (Measured From The Valve Bonnet) To Ensure, That The Lever Clears Valve Insulation., For Trunnion Mounted Valves Sealant /, Lubricant / Flushing Injection S, Assemblies Shall Be Provided For The, And Or Stem Seal. Refer Clause B.5.16 Of, Tk-1Zzza-Pi-Spe-0009., Valve Shall Be Suitable For, Bi-Directional Flow & Pressure Shutoff, Valve Shall Be Tested In Preferred And, Non Preferred Flow Direction., Preferred Flow Direction Shall Be Marked. , Ball Valve Cs Int. Coated, 150,0, Api 608, Flgd,B16.5,Ff, Lo, Full Bore, Bb, Long Pattern, With Locking Arrangement, A105n/A216 Gr.Wcb, A182 F304 /A351 Cf8, Stem Ss 304, Rtfe, Seal Flexible Graphite, A193 Gr.B7/A194gr.2H, Springsinconel X-750, Supp. Requirements, Valve Bore Shall Be Full Bore For 1/2 To, 11/2And Single Reduced Bore For 2 & Above, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005,Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0008,Tk-1Zzza-Pi-Spe-0009, And In-042, Internally Liquid Epoxy Coated Acc. To, Doc. Nr-0Zzzz-Cv-Spe-0019, Vendor To Submitpressure-Temp., Rating Chart, Design Pressure15 Kg/Cm2(G), Design Temperature65 Deg.C, Valve Shall Have 120Mm Extended Spindle, (Measured From The Valve Bonnet) To Ensure, That The Lever Clears Valve Insulation., For Trunnion Mounted Valves Sealant /, Lubricant / Flushing Injection S, Assemblies Shall Be Provided For The, And Or Stem Seal. Refer Clause B.5.16 Of, Tk-1Zzza-Pi-Spe-0009., Valve Shall Be Suitable For, Bi-Directional Flow & Pressure Shutoff, Valve Shall Be Tested In Preferred And, Non Preferred Flow Direction., Preferred Flow Direction Shall Be Marked. , Group -3 (Group-Wise Evaluation) Supply Of Ball Non Fire Safe ( Cast Carbon Steel ) For Nrep Project Incuding Tpi Charges As Specified In Material Requisition. , Ball Valve Cs, 150,0, Api 608, Flgd,B16.5,Rf, Lo, Full Bore, Bb, Long Pattern, With Locking Arrangement, A105n/A216 Gr.Wcb, A182 F304 /A351 Cf8, Stem Ss 304, Rtfe, Sealflexible Graphite, A193 Gr.B7/A194gr.2H, Springs Inconel X-750, Supp. Requirements, Valve Bore Shall Be Full Bore For 1/2 To, 11/2And Single Reduced Bore For 2 & Above, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005,Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0008,Tk-1Zzza-Pi-Spe-0009, And In-042, Vendor To Submitpressure-Temp., Rating Chart, Design Pressure12 Kg/Cm2(G), Design Temperature65 Deg.C, Valve Shall Have 120Mm Extended Spindle, (Measured From The Valve Bonnet) To Ensure, That The Lever Clears Valve Insulation., For Trunnion Mounted Valves Sealant /, Lubricant / Flushing Injection S, Assemblies Shall Be Provided For The, And Or Stem Seal. Refer Clause B.5.16 Of, Tk-1Zzza-Pi-Spe-0009., Valve Shall Be Suitable For, Bi-Directional Flow & Pressure Shutoff, Valve Shall Be Tested In Preferred And, Non Preferred Flow Direction., Preferred Flow Direction Shall Be Marked. , Group -4 (Group-Wise Evaluation) Supply Of Ball Valves Fire Safe Css For Nrep Project Incuding Tpi Charges As Specified In Material Requisition. , Ball Valve Ss Dual, 150,0, Api 608, Flgd,B16.5,Rf, Lo, Full Bore, Bb, Fire Safe, Long Pattern, With Locking Arrangement, A182f304/L A351cf3/M, A182 F316 /A351 Cf8m, Stem Ss 316, Rtfe, Sealflexible Graphite, A193 Gr.B7/A194gr.2H, Springsinconel X-750, Supp. Requirements, Valve Bore Shall Be Full Bore For 1/2 To, 11/2And Single Reduced Bore For 2 & Above, Shall Be A182 Gr.F304/304L Or, A351 Gr.Cf3/Cf8, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005,Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0008,Tk-1Zzza-Pi-Spe-0009, Vendor To Submitpressure-Temp., Rating Chart, Design Pressure10.5 Kg/Cm2(G), Design Temperature65 Deg.C, Valve Shall Have 120Mm Extended Spindle, (Measured From The Valve Bonnet) To Ensure, That The Lever Clears Valve Insulation., For Trunnion Mounted Valves Sealant /, Lubricant / Flushing Injection S, Assemblies Shall Be Provided For The, And Or Stem Seal. Refer Clause B.5.16 Of, Tk-1Zzza-Pi-Spe-0009., Valve Shall Be Suitable For, Bi-Directional Flow & Pressure Shutoff, Valve Shall Be Tested In Preferred And, Non Preferred Flow Direction., Preferred Flow Direction Shall Be Marked., Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Ball Valve Ss Dual, 150,0, Api 608, Flgd,B16.5,Rf, Lo, Full Bore, Bb, Fire Safe, Long Pattern, With Locking Arrangement, A182f304/L A351cf3/M, A182 F316 /A351 Cf8m, Stemss 316, Rtfe, Sealflexible Graphite, A193 Gr.B7/A194gr.2H, Springsinconel X-750, Supp. Requirements, Valve Bore Shall Be Full Bore For 1/2 To, 11/2And Single Reduced Bore For 2 & Above, Shall Be A182 Gr.F304/304L Or, A351 Gr.Cf3/Cf8, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005,Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0008,Tk-1Zzza-Pi-Spe-0009, Vendor To Submitpressure-Temp., Rating Chart, Design Pressure10.5 Kg/Cm2(G), Design Temperature65 Deg.C, Valve Shall Have 120Mm Extended Spindle, (Measured From The Valve Bonnet) To Ensure, That The Lever Clears Valve Insulation., For Trunnion Mounted Valves Sealant /, Lubricant / Flushing Injection S, Assemblies Shall Be Provided For The, And Or Stem Seal. Refer Clause B.5.16 Of, Tk-1Zzza-Pi-Spe-0009., Valve Shall Be Suitable For, Bi-Directional Flow & Pressure Shutoff, Valve Shall Be Tested In Preferred And, Non Preferred Flow Direction., Preferred Flow Direction Shall Be Marked., Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Ball Valve Ss Dual, 150,0, Api 608, Flgd,B16.5,Rf, Lo, Full Bore, Bb, Fire Safe, Long Pattern, With Locking Arrangement, A182f304/L A351cf3/M, A182 F316 /A351 Cf8m, Stem Ss 316, Rtfe, Sealflexible Graphite, A193 Gr.B7/A194gr.2H, Springs Inconel X-750, Supp. Requirements, Valve Bore Shall Be Full Bore For 1/2 To, 11/2And Single Reduced Bore For 2 & Above, Shall Be A182 Gr.F304/304L Or, A351 Gr.Cf3/Cf8, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005,Tk-1Zzza-Pi-Spe-0006,, Tk-1Zzza-Pi-Spe-0008,Tk-1Zzza-Pi-Spe-0009, Vendor To Submitpressure-Temp., Rating Chart, Design Pressure10.5 Kg/Cm2(G), Design Temperature65 Deg.C, Valve Shall Have 120Mm Extended Spindle, (Measured From The Valve Bonnet) To Ensure, That The Lever Clears Valve Insulation., For Trunnion Mounted Valves Sealant /, Lubricant / Flushing Injection S, Assemblies Shall Be Provided For The, And Or Stem Seal. Refer Clause B.5.16 Of, Tk-1Zzza-Pi-Spe-0009., Valve Shall Be Suitable For, Bi-Directional Flow & Pressure Shutoff, Valve Shall Be Tested In Preferred And, Non Preferred Flow Direction., Preferred Flow Direction Shall Be Marked., Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% => Limited
