Tender For Extension Of Fire Hydrant Pipelines To Central Scrap Yard At Ecil Hyderabad - 1 1 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. 2 2.1 Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including disposal of excavated earth upto 50 m and lift upto 1.5 m, disposed soil to be levelled and neatly dressed etc., as directed by Engineer-in- Charge: All Kinds of soil 3 3.1 Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. All kinds of soil 4 4.1 Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. Ordinary rock 5 5.1 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 300 mm dia. R.C.C. pipe 6 5.2 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 450 mm dia. R.C.C. pipe 7 6.1 Supplying and wrapping the anticorrosive material for buried pipes with coating of Primer and wrapping with 4 mm thick polymer corrosion resistant tape as per IS : 10221 with 15 mm overlap etc.complete and as directed by engineer in charge 150 mm nominal dia 8 6.2 Supplying and wrapping the anticorrosive material for buried pipes with coating of Primer and wrapping with 4 mm thick polymer corrosion resistant tape as per IS : 10221 with 15 mm overlap etc.complete and as directed by engineer in charge 100 mm nominal dia 9 7.1 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand 10 8.1 12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) 11 9.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size 12 9.2 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size 13 10.1 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size 14 11.1 Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete up-to plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. 15 12 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. 16 13.1 Centering and shuttering including strutting, propping etc. and removal of form for all heights Columns, Pillars, Piers, Abutments, Posts and Struts 17 14 Supply, installation, testing and commissioning of Bourden type, stainless steel dial type pressure gauge with isolation valve and pipe calibration of 0-16 kg/cm2. MAKE: HGURU / FIEBIG and Approved makes 18 15 Supplying, installing, testing and commissioning of 25mm Ball valves. Makes: Leader/ Zolotto / Approved 19 16.1 Providing , laying, testing & Commissioning of following classes MS pipes conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc., complete. Makes : Jindal / Hissar / Tata pipes 150mm nominal dia C Class 20 16.2 Providing , laying, testing & Commissioning of following classes MS pipes conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc., complete. Makes : Jindal / Hissar / Tata pipes 100mm nominal dia C Class 21 16.3 Providing , laying, testing & Commissioning of following classes MS pipes conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc., complete. Makes : Jindal / Hissar / Tata pipes 80mm nominal dia C Class 22 17.1 Supply , fixing , testing and commissioning of butterfly valve PN 16, with Bronze / Gun metal seat duly ISI marked complete with Nuts, Bolts, Washers, gaskets, conforming to IS 13095 of following sizes as required. Makes: Audco / Kirloskar / BDK / H- Shankar / Leader/ Zolotto / Intervalve. 150 mm .dia 23 18.1 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works 24 19.1 Painting with Fire RED synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work 25 20 Supplying and fixing single headed Internal / External hydrant valve with instantaneous Gun metal/SS couplings of 63mm dia with Cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gun Metal cap and chain as required. Make: Mini Max / Safex / Newage / Winco / Padmini. 26 21 Supplying and fixing 63mm dia, 15 mtr long CP hose pipe with 63mm dia Male and Female Gun metal / SS couplings duly binded with GI wire, rivets etc conforming to IS 636 (Type -A) as required.Make: Mini Max / Safex / Newage / Winco /Padmini. 27 22 Supplying and fixing of hose cabinet of size 750mm X 600mm x 250mm made of No 16 gauge SWG CRCA sheet with 6mm thick glazed glass door including necessary locking arrangement suitable to accommodate 2 Nos 15 mtr long Hose pipe, 1 No branch pipe, mounted on wall OR raised brick platform and duly painted with Post office red externally and white internally. Make: Mini Max / Safex / Newage / Winco /Padmini. 28 23 Supplying , Installing , testing and commissioning of Fire Monitor comprising of 3 inch (80mm) and 6 inch (152mm) diameter waterways are designed for applications that require large volumes of water with minimal manpower or friction loss. Large volume streams are ideally suited for breaking through thermal updrafts on tank fires, covering large areas quickly for vapor recovery, and for fireboat applications. Monitors can also be furnished with manifolds that are custom-built for specific requirements with Storz Quick Connect Nozzle 3 inch (80mm), 5 inch (127mm), or 6 inch (152mm) as required. 29 24 Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (Supplying , fabricating, structural steel supports such as MS channels, angles, flats , rods as required at site with anchor fasteners, clamps, threaded rods, nuts, bolts, washers etc. complete). 30 25 Supply and installation of pipe wash out arrangement MS elbow, butterly valve-80mm dia, end plug details etc., complete as per installation detail drawing and main drawing at shown locations. 31 26.1.1 Carriage of Material - By Mechanical Transport including loading, unloading and stacking upto 2 km Lime, moorum, building rubbish 32 26.1.2 Carriage of Material - By Mechanical Transport including loading, unloading and stacking upto 2 km Earth 33 26.1.3 Carriage of Material - By Mechanical Transport including loading, unloading and stacking upto 2 km Excavated rock
