Rates For Non Csr Items For Providing And Fixing Interior And Modular Furniture For Tahsil Office Building At Samudrapur Tah Samudrapur And At Hinganghat Tah Hinganghat And Nagar Parishad Office Building At Sindhi (R) Tah Seloo Dist Wardha. , Item , Tea Table 900Mm X 750Mm X 450Mm For M.S. Ante Chamber Providing And Fixing Of Tea Table 900Mm X 750Mm X 450Mm With 12Mm Thick Color Etched Tempered Glass With Beveled Drawing Made Out Of 18Mm Thick Waterproofing Ply. The Outer Laces To Be Finished With High Quality 4Mm Thick Veneer Or 1 Mm Thick Mica Etc , Provding & Supplying 3 Seater Sofa With 50 Dencity X 100Mm Soft Foam & Turky Made Sude Fabric Dimension Length: 240 (Cms) Breadth (Cms): 82.50 (Cms)Height (Cms): 86 (Cms) Seating Capacity: Two Seat As Per Drawing Including Necessary Transportation And Lifts As Directed By Engineers In Charge Etc. Complete. , Provding & Supplying 1 Seater Sofa With 50 Dencity X 100Mm Soft Foam & Turky Made Sude Fabric Dimension Length: 87 (Cms) Breadth (Cms): 82.50 (Cms)Height (Cms): 86 (Cms) Seating Capacity: One Seat As Per Drawing Including Necessary Transportation And Lifts As Directred By Engineers In Charge Etc. Complete. , Executive Office Table Overall Size @1800 X 1800 X 760To Be Made Of 18 Mm Thick Prelaminated Partical Board /Mdf With Pvc Edge Bandincluding Low Height Credestal @1800Lx500dx630htwith Corner Round Top Of Size 1800 X 880 Rested 80 Mm Above Side Credestal And Top Shall Be Made In Double Or Two Layer.Bottom Lawyer Of The Top Shall Be P. U. Painted Coated Having Thickness 35 Mm With Edges All Over Beveled Finish And Upper Lawyer Shall Be Laminated Having Thickness 10 Mm With Edges Round And Painted. Office Table To Be Provided Shall Be In Duel Color And Right Side Long Credestal With Two Equal Drawers In The Right Side And Middle & Internal Side Of The Credestal Shall Be Open Without Sutter. Upper Drawer Shall Have Numerical Lock For Keeping Imp Files And Stuffs. There Shall Be Arrangement Of And Arrangement Of Spike Guard Having Internet Lan Cable Socket Arrangement, Hdmi Socket, 2 Usb Socket 2A,6Amp Two Electric Socket On The Top Of The Table Left Side Panel Of The Table Shall Be Fitted Cross Or Anguler To Provide Looks To The Table, Under Structure Like Modesty, Side Panel, Side Credestol Shall Be Pu Painted Or Look Like Painted Or If Laminate Is Used It Shold Be In The Same Color As The Color Of The P.U Painted Bottom Layer Of The Table Top To Provied Looks & Aestheticsetc.Complete&Asdirectedby Engineer In Charge. , Executive Office Table Overall Size @2000 X 1800 X 755To Be Made Of 18 Mm Thick Prelaminated Partical Board /Mdf With Pvc Edge Bandincluding Low Height Credestal @1800Lx500dx630htwith Corner Round Top Of Size 2000 X 885 X 755 Rested 80 Mm Aboveside Credestal And Top Shall Bemade In Double Or Two Layer.Bottom Lawyer Of The Top Shall Be P.U. Painted Having Thickness 35 Mm With Edges All Over Beveled Finish And Upper Lawyer Shall Be Laminated Having Thickness 10 Mm With Edges Round And Painted. Office Table To Be Provided Shall Be In Duel Color And Left Side Storage Of The Table Shall Have Deep Storage With Single Shutter On It Of Size 500X800x630 And Right Side Long Credestal With Two Equal Drawers In The Middle And Shutter On Outer Side And Internal Side Of The Credestal Shall Be Open Without Sutter. Upper Drawer Shall Have Numerical Lock For Keeping Imp Files And Stuffs. Front Side Of Both Side Storages Shall Be Decorated With Leather Tiles And Modesty Panel Should Have Anodized Profile Work With Pvc Edge Band All The Tops Of The Tables And Credestal Shall Have Round Corners. All The Four Corners Of The Long Side Credestal And Two Front Corners Of Left Side Storage Shall Be Provided With Corner G I Section Round Post So That It Shall Not Harm Anybody There Shall Be Arrangement Of Led Profile Light Under The Top Of The Table Towards Modesty And Arrangement Of Spike Guard Having Internet Lan Cable Socket Arrangement, Hdmi Socket, 2 Usb Socket 2A,6Amp Two Electric Socket On The Top Of The Tableetc.Complete&Asdirectedby Engineer In Charge. , Visitor Chair Type/With Arms/Ms Pwcd Us/Foam Seat & Back Visitor Chair– Specification Backrest : Foam Back Upholstered With Fabric (Black, Red, Blue, Grey) Seat Plywood Foam Upholstery With Fabric (Black, Red, Blue, Grey) Under Structure: Ms Pipe Finish: Powder Coat (Black) Foot Pad : Nylon Glide , Providing & Fixing Wall Paneling Structure Supporting System Made Of 1.5X1.5 Thk Ply Stripes ( Provided @ .60 X 60Cm C/Cinboth Direction)Madeupof18mmplywoodmade ,Quality Make( Mr Grade Commercial Plywood.) Quality Make ( Century, Commander, City Ply, Sharen ,Biz Etc. Or Equivalent ) Providedfrontcoveredwith 18Mmply , Including All Necessary Hard Waresetc.Complete,Asperdetailed Drawing& Designattachedincludingcostofallmaterials,Lead,Labours, Necessaryfixturesandfastening, Etc.Completeas Directed By Engineer In Charge. , Providing & Fixing Decorative Texture 5Mm Charcol Panel On Wall Paneling With Appropriate Pvc Glue &Other Hardwaredecorative Charcoal Sheet Is Pasted On It Etc.Complete,Asperdetailed Drawing& Designattachedincludingcostofallmaterials,Lead,Labours, Necessaryfixturesandfastening, Etc.Completeas Directed By Engineer In Charge. , Providingandfixinglaminated Woodenflooringinposition Havingthickness8mm Including 6Mm Thick Hit Loan Sheet With Rubber Solution & All Necessary Hard Wares,& Profile Like Scaring, Reducers & Bidding As Perdetailed Drawing & Design Attached Including Cutting & Matching ,Cost Of All Materials, Lead, Labors, Necessary Fixtures And Fastening,Etc. Complete & As Directed . , Providing And Fixing Pvc Planks Vinyl 2Mm To 3 Mm Thk, Size 900Mmx150mm)Carpetflooringinposition Paste On Existing Floor With Help Of Mix Adhesivesincluding All Necessary Hard Wares, As Per Detailed Drawing & Design Attached Including Cutting & Matching ,Cost Of Allmaterials,Lead,Labors,Necessaryfixturesandfastening, Painting, Scarab Folding Etc. Completeitem . , Full Height Steel Storage @ 900Lx450dx2100h Providing And Fixing Open Able Steel Storage Of 900 X 450 X 2100Ht, With 4 Adjustable Shelves, Complete Body & Shutter Made In 0.8 Mm Thick & Top In 2 Mm Thick Crca, 2 Shutter To Be Mounted With The Help Of Cup Hinges, And 4 Adjustable Levelers, Enitre Storage In Powder Coated Finish With 60 To 80 Microns As As Per Drawing. , Providing & Arrangement Of Mid Back, Normal Syncro Mechanism , Fixed Armrest , Gas Lift For Seat Height Adjustment, Standard 5-Prong/Nylon Base With Leather Upholstery , Full Height Partitions In Glass Finish - Providing And Fixing 80Mm To 85Mm Thick Full Height Double Skin Partition Up To 3 Mtr Height With All Visible Sections In Anodized / Powder Coated Finish. Made Up Of Frames And Tiles. Frame Construction In Combination Of Aluminum Rails And Bottom ,Center And Top Members, Connected With 2 Way Round Shape Post , 3Way Post , 4 Way Post Made Up Of Aluminum Extruded And Tiles In 5Mm Thk. Non Toughened Glass On Both Side. With All The Joints In The Partitions Covered With Pvc Extrusions To Provide Better Sound Proofing. Tiles To Be Separated 55Mm From Each Other To Provide Adequate Space For Drawing Cables For Electric, Data And Telephone With Proper Facility For Fixing Electrical And Data Switch Plates. As Per Design And Drawing. , Medium Height Partition @ 1800/1200Ht Tile Based Partition System Tile Based Aluminum Partition System Of 1800/1200Mm Ht. Made Of 60Mm Thick Aluminum Frames Having Two Separate Race Ways For Laying Electrical & Computer Wiring. The Wire Management Shall Be Through To The Race Way To Be Fitted At Bottom Of Partition Other Immediately Below Of Work Top With Hook On Type Raceway Cover For Easy Access Of Wires. Frames To Be Joined By Aluminum Connectors With M6 X 16 Pan-Head Machine Screw And Washer With Aluminum Post Cover. Post Cover Snap On Fashion To Be Connected On Aluminum Connector Visible Aluminium To Be In Anodized / Powdercoated Finish. The Top Exposed Sides Of The Frame And Posts Should Be Covered With Horizontal/ Vertical Trim And Caps Made Of Aluminum In Anodized / Powder Coated Finish In Order To Enhance Its Look.Upper Tiles On The Partition To Be In Soft Board Or Marker Or Prelaminated Partical Board Tile Of 9Mm. Thk., Prelaminated Partical Board Lower Tiles In Laminate Finish 9Mm. Thk. On Both The Sides .Size :- 1200/1800Mm (H) , Side Storage @ 900Lx450x750ht Providing & Fixing Of Openable Storage @ 900Lx450dx 750Ht:- To Be Made Out Of 25Mm Thick Top & 18Mm Prelaminated Particle Board With Openable Laminate Shutter & Have A Adjustable Shelf As Per Design And Drawing And Instructions Of Engineer In Charge. , Providing & Fixing Table For Staff Size 1200Mm L X 600Mm B X 750Mmhinposition Withsupportingsystemmadeupof18mm Plywood,Mr Grade Commercial Plywood Quality Make ( Century, Commander, City Ply, Sharen ,Biz Etc. Or Equivalent )( Providing Provision For 1 Drawers Shutter & Key Board Drawer, Below Storagebox) Includingall Exposedsurfaces&Unexposed Surfaces Covered With 1.5 Mm Thk Laminate, & Frant Side Decorative Luvars Includingall Necessaryhardwares,Fevicol,Handles,Patchlocks,Drawer Locks,Hinges Etc.Completedasperdetaileddrawing&Design Attached Including Cost Of All Materials, Lead, Labours, Necessary Fixturesandfastening,Paintingetc.Complete&Asdirectedby Engineer In Charge. , Fullheight Openable Storage @ 900Lx450x1200ht Providing & Fixing Of Openable Storage @ 900Lx450dx 1850Ht:- To Be Made Out Of 25Mm Thick Top & 18Mm Prelaminated Particle Board With Openable Laminate Shutter & Have A Adjustable Shelf As Per Design And Drawing And Instructions Of Engineer In Charge. , Low Height Openable Storage @ 1200Lx450x750ht Providing & Fixing Of Openable Storage @ 1200Lx450dx 750Ht:- To Be Made Out Of 25Mm Thick Top & 18Mm Prelaminated Particle Board With Openable Laminate Shutter & Have A Adjustable Shelf As Per Design And Drawing And Instructions Of Engineer In Charge. , Providing & Fixing Table Size - 1500Mm X 750Mm X 750Mm In Position Withsupportingsystemmadeupof18mm Plywood, Mrgrade Commercial Plywood Quality Make ( Century, Commander, City Ply, Sharen ,Biz Etc. Or Equivalent )( Providing Provision For 1 Drawers Shutter & Key Board Drawer, Below Storagebox) Includingall Exposedsurfaces&Unexposed Surfaces Covered With 1.5 Mm Thk Laminate,Includingall Necessaryhardwares,Fevicol,Handles,Patchlocks,Drawer Locks,Hinges Etc.Completedasperdetaileddrawing&Design Attached Including Cost Of All Materials, Lead, Labours, Necessary Fixturesandfastening,Paintingetc.Complete & As Directed By Engineer In Charge. , Double Faced Mobile Unit For Compactor 2150Mmh X 2745Mmw X 900Mmd Providing And Fixing Double Faced Mobile Unit For Compactor 2150Mmh X 2745Mmw X 900Mmd - Base Frame : Base Frame Shall Be Fabricated In Channel Type From Minimum 2.5 Mm Thick Ms Sheet Size Of Channel 25Mm X 100Mm X 45Mm. Guide Rails : The Guide Rails Shall Be Made Out Of 28Mm Bright Bar Placed On 1.2 Mm Thick M.S. Plate Which Will Be Above The Floor And Are As Per The International Standard Of Safety. Super Structure: Super Structure Of The Mobile Storage System Will Consist Of Knock Down Type Panels. All The Components Such As Shelves, Front Panel, End Panel, Vertical Rear Panel, Central Partition Etc. Will Act As An Integral Member Of The Unit. Shelves : Shelves Made Of 22Swg Thick Prime Quality C.R.C.A. Having 10 Folds Each Will Be Provided Each Designed To Carry A U.D.L. Of 70 Kilograms. Vertical Panel : Vertical Panel Consists Of The Front, Centre & Rear Panel Shall Be Made Out Of 20Swg Thick C.R.C.A. Prime Quality Mild Steel & Designed To Take The Load Of Shelves. Drive Cover Panel : Made Out Of 22Swg Thick C. R.C. A. Prime Quality Steel To Cover The Entire Drive Mechanism. Centre Partition : The Centre Partition Will Comprise Of A Full C.R.C.A. Prime Quality Mild Steel 22Swg Sheet. Locking : System Will Be Provided With Individual Rack Locking As Well As Centralized Locking Arrangement On The Last Unit When All Units Are Brought Together, Central Lock When Operated Gets Locked With The Floor & Does Not Allow Access To The Units. Drive Mechanism: Driving Mechanism Will Be Provided Externally Supported On Special Grade Anti-Friction Bearing To Have Smooth & Effortless Movement. Entire Mechanism Or Gear & Sprockets Shall Be Incorporated Within The Front Panel Provided In The Front Of The Unit Within An Area Of 1000Mm X 200Mm X 60Mm. Driving Wheel : Fully Powder Coated Three Pronged Drive Wheel For Better Torque & Free Movement Of The Rack Over The Guide Rail. Indexing Arrangement: Acrylic Card Holders Provided On The Front Panel For Easy Identification & Retrieval. Final Finish: Powder Coating (8 Tanks Process With 70 Microns). , Single Faced Mobile Unit For Compactor 2150Mmh X 2745Mmw X 457Mmd Providing And Fixing Single Faced Mobile Unit For Compactor 2150Mmh X 2745Mmw X 457Mmd - Base Frame : Base Frame Shall Be Fabricated In Channel Type From Minimum 2.5 Mm Thick Ms Sheet Size Of Channel 25Mm X 100Mm X 45Mm. Guide Rails : The Guide Rails Shall Be Made Out Of 28Mm Bright Bar Placed On 1.2 Mm Thick M.S. Plate Which Will Be Above The Floor And Are As Per The International Standard Of Safety. Super Structure : Super Structure Of The Mobile Storage System Will Consist Of Knock Down Type Panels. All The Components Such As Shelves, Front Panel, End Panel, Vertical Rear Panel, Central Partition Etc. Will Act As An Integral Member Of The Unit. Shelves : Shelves Made Of 22Swg Thick Prime Quality C.R.C.A. Having 10 Folds Each Will Be Provided Each Designed To Carry A U.D.L. Of 70 Kilograms. Vertical Panel : Vertical Panel Consists Of The Front, Centre & Rear Panel Shall Be Made Out Of 20Swg Thick C.R.C.A. Prime Quality Mild Steel & Designed To Take The Load Of Shelves. Drive Cover Panel : Made Out Of 22Swg Thick C. R.C. A. Prime Quality Steel To Cover The Entire Drive Mechanism. Centre Partition : The Centre Partition Will Comprise Of A Full C.R.C.A. Prime Quality Mild Steel 22Swg Sheet. Locking : System Will Be Provided With Individual Rack Locking As Well As Centralized Locking Arrangement On The Last Unit When All Units Are Brought Together, Central Lock When Operated Gets Locked With The Floor & Does Not Allow Access To The Units. Drive Mechanism : Driving Mechanism Will Be Provided Externally Supported On Special Grade Anti-Friction Bearing To Have Smooth & Effortless Movement. Entire Mechanism Or Gear & Sprockets Shall Be Incorporated Within The Front Panel Provided In The Front Of The Unit Within An Area Of 1000Mm X 200Mm X 60Mm. Driving Wheel : Fully Powder Coated Three Pronged Drive Wheel For Better Torque & Free Movement Of The Rack Over The Guide Rail. Indexingarrangement: Acrylic Card Holders Provided On The Front Panel For Easy Identification & Retrieval. Final Finish: Powder Coating (8 Tanks Process With 70 Microns). , Single Faced Fixed Unit For Compactor 2150Mmh X 2745Mmw X 457Mmd Providing And Fixing Single Faced Fixed Unit For Compactor 2150Mmh X 2745Mmw X 457Mmd - Base Frame : Base Frame Shall Be Fabricated In Channel Type From Minimum 2.5 Mm Thick Ms Sheet Size Of Channel 25Mm X 100Mm X 45Mm. Guide Rails : The Guide Rails Shall Be Made Out Of 28Mm Bright Bar Placed On 1.2 Mm Thick M.S. Plate Which Will Be Above The Floor And Are As Per The International Standard Of Safety. Super Structure : Super Structure Of The Mobile Storage System Will Consist Of Knock Down Type Panels. All The Components Such As Shelves, Front Panel, End Panel, Vertical Rear Panel, Central Partition Etc. Will Act As An Integral Member Of The Unit. Shelves : Shelves Made Of 22Swg Thick Prime Quality C.R.C.A. Having 10 Folds Each Will Be Provided Each Designed To Carry A U.D.L. Of 70 Kilograms. Vertical Panel : Vertical Panel Consists Of The Front, Centre & Rear Panel Shall Be Made Out Of 20Swg Thick C.R.C.A. Prime Quality Mild Steel & Designed To Take The Load Of Shelves. Drive Cover Panel : Made Out Of 22Swg Thick C. R.C. A. Prime Quality Steel To Cover The Entire Drive Mechanism. Centre Partition : The Centre Partition Will Comprise Of A Full C.R.C.A. Prime Quality Mild Steel 22Swg Sheet. Locking : System Will Be Provided With Individual Rack Locking As Well As Centralised Locking Arrangement On The Last Unit When All Units Are Brought Together, Central Lock When Operated Gets Locked With The Floor & Does Not Allow Access To The Units. Drive Mechanism : Driving Mechanism Will Be Provided Externally Supported On Special Grade Anti-Friction Bearing To Have Smooth & Effortless Movement. Entire Mechanism Or Gear & Sprockets Shall Be Incorporated Within The Front Panel Provided In The Front Of The Unit Within An Area Of 1000Mm X 200Mm X 60Mm. Driving Wheel : Fully Powder Coated Three Pronged Drive Wheel For Better Torque & Free Movement Of The Rack Over The Guide Rail. Indexing Arrangement : Acrylic Card Holders Provided On The Front Panel For Easy Identification & Retrieval. Final Finish : Powder Coating (8 Tanks Process With 70 Microns). , Double Faced Mobile Unit For Compactor 2150Mmh X 1830Mmw X 900Mmd Providing And Fixing Double Faced Mobile Unit For Compactor 2150Mmh X 1830Mmw X 900Mmd - Base Frame : Base Frame Shall Be Fabricated In Channel Type From Minimum 2.5 Mm Thick Ms Sheet Size Of Channel 25Mm X 100Mm X 45Mm. Guide Rails : The Guide Rails Shall Be Made Out Of 28Mm Bright Bar Placed On 1.2 Mm Thick M.S. Plate Which Will Be Above The Floor And Are As Per The International Standard Of Safety. Super Structure : Super Structure Of The Mobile Storage System Will Consist Of Knock Down Type Panels. All The Components Such As Shelves, Front Panel, End Panel, Vertical Rear Panel, Central Partition Etc. Will Act As An Integral Member Of The Unit. Shelves : Shelves Made Of 22Swg Thick Prime Quality C.R.C.A. Having 10 Folds Each Will Be Provided Each Designed To Carry A U.D.L. Of 70 Kilograms. Vertical Panel : Vertical Panel Consists Of The Front, Centre & Rear Panel Shall Be Made Out Of 20Swg Thick C.R.C.A. Prime Quality Mild Steel & Designed To Take The Load Of Shelves. Drive Cover Panel : Made Out Of 22Swg Thick C. R.C. A. Prime Quality Steel To Cover The Entire Drive Mechanism. Centre Partition : The Centre Partition Will Comprise Of A Full C.R.C.A. Prime Quality Mild Steel 22Swg Sheet. Locking : System Will Be Provided With Individual Rack Locking As Well As Centralised Locking Arrangement On The Last Unit When All Units Are Brought Together, Central Lock When Operated Gets Locked With The Floor & Does Not Allow Access To The Units. Drive Mechanism : Driving Mechanism Will Be Provided Externally Supported On Special Grade Anti-Friction Bearing To Have Smooth & Effortless Movement. Entire Mechanism Or Gear & Sprockets Shall Be Incorporated Within The Front Panel Provided In The Front Of The Unit Within An Area Of 1000Mm X 200Mm X 60Mm. Driving Wheel : Fully Powder Coated Three Pronged Drive Wheel For Better Torque & Free Movement Of The Rack Over The Guide Rail. Indexing Arrangement : Acrylic Card Holders Provided On The Front Panel For Easy Identification & Retrieval. Final Finish : Powder Coating (8 Tanks Process With 70 Microns). , Single Faced Mobile Unit For Compactor 2150Mmh X 1830Mmw X 457Mmd Providing And Fixing Single Faced Mobile Unit For Compactor 2150Mmh X 1830Mmw X 457Mmd - Base Frame : Base Frame Shall Be Fabricated In Channel Type From Minimum 2.5 Mm Thick Ms Sheet Size Of Channel 25Mm X 100Mm X 45Mm. Guide Rails : The Guide Rails Shall Be Made Out Of 28Mm Bright Bar Placed On 1.2 Mm Thick M.S. Plate Which Will Be Above The Floor And Are As Per The International Standard Of Safety. Super Structure : Super Structure Of The Mobile Storage System Will Consist Of Knock Down Type Panels. All The Components Such As Shelves, Front Panel, End Panel, Vertical Rear Panel, Central Partition Etc. Will Act As An Integral Member Of The Unit. Shelves : Shelves Made Of 22Swg Thick Prime Quality C.R.C.A. Having 10 Folds Each Will Be Provided Each Designed To Carry A U.D.L. Of 70 Kilograms. Vertical Panel : Vertical Panel Consists Of The Front, Centre & Rear Panel Shall Be Made Out Of 20Swg Thick C.R.C.A. Prime Quality Mild Steel & Designed To Take The Load Of Shelves. Drive Cover Panel : Made Out Of 22Swg Thick C. R.C. A. Prime Quality Steel To Cover The Entire Drive Mechanism. Centre Partition : The Centre Partition Will Comprise Of A Full C.R.C.A. Prime Quality Mild Steel 22Swg Sheet. Locking : System Will Be Provided With Individual Rack Locking As Well As Centralized Locking Arrangement On The Last Unit When All Units Are Brought Together, Central Lock When Operated Gets Locked With The Floor & Does Not Allow Access To The Units. Drive Mechanism : Driving Mechanism Will Be Provided Externally Supported On Special Grade Anti-Friction Bearing To Have Smooth & Effortless Movement. Entire Mechanism Or Gear & Sprockets Shall Be Incorporated Within The Front Panel Provided In The Front Of The Unit Within An Area Of 1000Mm X 200Mm X 60Mm. Driving Wheel : Fully Powder Coated Three Pronged Drive Wheel For Better Torque & Free Movement Of The Rack Over The Guide Rail. Indexing Arrangement : Acrylic Card Holders Provided On The Front Panel For Easy Identification & Retrieval. Final Finish : Powder Coating (8 Tanks Process With 70 Microns). , Single Faced Fixed Unit For Compactor 2150Mmh X 1830Mmw X 457Mmd Providing And Fixing Single Faced Fixed Unit For Compactor 2150Mmh X 1830Mmw X 457Mmd - Base Frame : Base Frame Shall Be Fabricated In Channel Type From Minimum 2.5 Mm Thick Ms Sheet Size Of Channel 25Mm X 100Mm X 45Mm. Guide Rails : The Guide Rails Shall Be Made Out Of 28Mm Bright Bar Placed On 1.2 Mm Thick M.S. Plate Which Will Be Above The Floor And Are As Per The International Standard Of Safety. Super Structure : Super Structure Of The Mobile Storage System Will Consist Of Knock Down Type Panels. All The Components Such As Shelves, Front Panel, End Panel, Vertical Rear Panel, Central Partition Etc. Will Act As An Integral Member Of The Unit. Shelves : Shelves Made Of 22Swg Thick Prime Quality C.R.C.A. Having 10 Folds Each Will Be Provided Each Designed To Carry A U.D.L. Of 70 Kilograms. Vertical Panel : Vertical Panel Consists Of The Front, Centre & Rear Panel Shall Be Made Out Of 20Swg Thick C.R.C.A. Prime Quality Mild Steel & Designed To Take The Load Of Shelves. Drive Cover Panel : Made Out Of 22Swg Thick C. R.C. A. Prime Quality Steel To Cover The Entire Drive Mechanism. Centre Partition : The Centre Partition Will Comprise Of A Full C.R.C.A. Prime Quality Mild Steel 22Swg Sheet. Locking : System Will Be Provided With Individual Rack Locking As Well As Centralized Locking Arrangement On The Last Unit When All Units Are Brought Together, Central Lock When Operated Gets Locked With The Floor & Does Not Allow Access To The Units. Drive Mechanism : Driving Mechanism Will Be Provided Externally Supported On Special Grade Anti-Friction Bearing To Have Smooth & Effortless Movement. Entire Mechanism Or Gear & Sprockets Shall Be Incorporated Within The Front Panel Provided In The Front Of The Unit Within An Area Of 1000Mm X 200Mm X 60Mm. Driving Wheel : Fully Powder Coated Three Pronged Drive Wheel For Better Torque & Free Movement Of The Rack Over The Guide Rail. Indexing Arrangement : Acrylic Card Holders Provided On The Front Panel For Easy Identification & Retrieval. Final Finish : Powder Coating (8 Tanks Process With 70 Microns). , Executive Office Table Overall Size @ 3000 X 2000 X 750To Be Made Of 18 Mm Thick Prelaminated Partical Board /Mdf With Pvc Edge Bandincluding Low Height Credestal @2000Lx530dx630ht With Corner Round Top 50 Mm Thick Of Size 2400 X 1000 In Sandwich Pattern With Middle Portion Of The Top Shall Have Anodized Section Or Profile And Upper And Bottom Side Shall Be Edge Binded For Giving Looks And Aesthetics To Thetable Office Table To Be Provided In Duel Color And Left Side Storage Of The Table Shall Have Three Equal Drawes With Handle Less Arrangement Of Size 600 X 900 X 630 And Right Side Long Credestalwith Two Equal Drawers In The Middle And Shutter On Outer Side And Inner Side Of The Storage Shall Be Open Upper Drawer Shall Have Numerical Lock For Keeping Imp Files And Stuffs All The Tops Of The Table Shall Be Corner Rounded All The Four Corners Of The Long Side Storages And Two Froth Corners Of Left Side Storage Shall Be Provided With Cornerround Post In Same Colour Fabric Laminate So That It Shall Not Harm Anybody There Shall Be Arrangement Of Led Profile Light Under The Top Of The Table Towerds Modesty And Arrangement Of Two Spike Guard Having Internet Lan Cable Socket Arrangement, Hdmi Socket, 2 Usb Socket 2A,6Amp Two Electric Socket On The Top Of The Table Front Portion Of Both Storage Shall Be Provided With Fabric Colored Laminate And Modesty Panel Shall Be Having Similar Colored Fabric Color Laminate Panel On It To Provide Looks And Aesthetics Andside Storage Shall Havedesign Element Or Anodized Profile Work On Itto Provide Looks Etc. Complete As Directed By Engineer In Charge , Provinding Structural Steel Work In Hollow Section Of Various Thick And Size In Square Rectangular And Round Shape From 25Mm To 450Mmsection As Per Is 4923 Yst 310 Grade Product Form Iron Or And Blast Furnace Route Etc As Per Detailed Designs And Drawing Or As Directed Including Cutting Fabrication, Hoisting , Erecting Fixing In Position Macking Riveted/ Bolted/ Velded Connection And Painting Completed , Providing And Fixing 3 Seater Cast Iron Bench In Ms Rectangle Pipe In Verious Sizes Overall Bench Size5 Ft X 2 Ft X 3.5 Ftcolur As Per Buyers Choiceincluding Necessary Transportation And Lifts As Directed By Engineers In Charge Etc. Complete. , Providing And Fixing Incumbents Board Made Of 06Mm Acrylic Material Embossing The 2Mm Thick Letters With Appropriate Font Including Proper Fixing With Sufficient Studs To Wall Including Necessary Transportation And Lifts As Directed By Engineers In Charge Etc. Complete. , Providing And Fixing Name Plate With Acrylic Material Embossing The 2Mm Thick Letters With Appropriate Font Including Proper Fixing Arrangements Including Necessary Transportation And Lifts As Directed By Engineers In Charge Etc. Complete. , Providing And Fixing Logo With Acrylic Material 25Mm Embossing The Letters With Including Proper Fixing Arrangements Including Necessary Transportation And Lifts As Directed By Engineers In Charge Etc. Complete. , Providing And Fixing Notice Board Of Size 1800 X 200 X 1200 Mm. 18Mm Thick Prelaminated Particle Board. All Edges Are Covered By 2 Mm. Thk. Pvc Edge Bands Glued By Hot Melt Glue Applied By Auto Edge Banding Machine. With Slinding Glass Etc Complete , Providing And Fixing Floor Directory Made Of 10Mm Acrylic Material Embossing The 2Mm Thick Letters With Appropriate Font Including Proper Fixing With Sufficient Studs To Wall Including Necessary Transportation And Lifts As Directed By Engineers In Charge Etc. Complete. , Provinding And Fixing Aluminium Rectangular Pipe Section Of Required Size And Thick Off Approved Isi Mark Manufacture As A Fin Of Elevation Including Color Anodized Connecting Angle Plates And Necesaries Screw And Fitting Including Scaffolding Lead And Lift As Necesary Etc Compelete , 3D Wall Dado Panelling : Providing And Fixing 3D Wall Sculpture In Water Proof Mdf Dado Panel With Single Pattern On Existing 8 Or 12Mm Thick Ply-Wood Framework Comprising Or On Existing Framework Comprising Or On Existing As Per Architectural Position Including Cutting Fixing, Fastening To Be Done To Obtain A Flush To Surface And A Seamless Finish Etc Complete As Per Detailed Drawing And As Directed By Engineer Incharge. , Providing And Fixing T.W. Beading Out Of 38X38mm Size. Moulded Of Required Length Of Approved Quality As Per Drawing Details And As Directed By Engineer In Charge Etc Including Required Nails, Screws, All Material And Labour Etc Complete , Providing And Fixing Textured Wall Paper Of Approved Quality, Shade Colour And Pattern Including All Material, Surface Making, Adhesive,Labour, Cleaning, And Scaffolding Etc All Complete As Per Drawings As Directed By Engineerin Charge , Providing And Fixing 1.5 Mm Thick Mica Of Approved Make, Colour Shade And Pattern To Furniture Or To Other Work Done In Ply Wood At Site With Approved Finish Using Fevicol, Nails, Or Using Adhesives Etc As Per Approved Architectural Detailed Drawings And As Directed By Engineer Incharge Including All Material Adhesive, Nails, Agro Tape Scaffolding Etc Complete , Providing & Fixing In Position, Carpet More Than 800+ Gsm, Made With 100% Stain Proof Fibres Of Approved Make Along With 5Mm Underlay As Per Architectural & Acoustical Design & Instructions & Complete In All Aspects Including All Materials Labour, Finishing Etc Complete As Directed Engineer In Charge. , Full Height Openable Storage @ 900Lx450x750ht Providing & Fixing Of Openable Storage @ 900Lx450dx 750Ht:- To Be Made Out Of 25Mm Thick Top & 18Mm Prelaminated Particle Board With Openable Laminate Shutter & Have A Adjustable Shelf As Per Design And Drawing And Instructions Of Engineer In Charge.
