|
| 1 | SCHEDULE‘A’ PART-I (Living Accnand Attach Toilet/Bathroom) |
| 2 | Construction of PFTS (15x8 mtr) Mahila Barrack incl PPGI Sheet roofing300x300mm ceramic galss Floor tile 12.5mm thick tapered edge plain board ceiling and rest all as per specification and drg No. Engr/22 Sect /2022-23/63 Sheet 1/2 and 2/2 |
| 3 | SCHEDULE‘A’ PART-II (Elect) |
| 4 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S./PVC box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. (group B wiring) |
| 5 | Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. |
| 6 | Supplying and fixing 3 pin 5/6 amp socket outlet on the existing switch box/ cover including connections etc. as required. |
| 7 | Supplying and fixing 5/6 amps switch piano type on the existing switch box/ cover including connections etc. as required. |
| 8 | Supplying and fixing 15/16 amp switch piano type on the existing switch box/ cover including connections etc. as required. |
| 9 | Supplying and fixing 6 pin 15/16 amp socket outlet piano type on the existing switch box/ cover including connections etc. as required. |
| 10 | Supplying and fixing brass/ insullated batten/ angle holder including connection etc. as required. |
| 11 | Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block includingconnection etc as required. |
| 12 | Supplying and fixing 2 + 6 way, Single door, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 13 | Supplying and fixing32 amps rating, 240/415 volts, \"C\" curve, miniature circuit breaker suitable for inductive load of single poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 14 | Supplying and fixing 63 amps rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 15 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 16 | Supplying and drawing 2 x 6 sq. mm of FR PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required. |
| 17 | Supply, Installation, testing and commissioning of pre-wired, CFL/ LED bulkhead luminaires fitting with 9 watt CFL, with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required. |
| 18 | Supply, Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting suitable for surface/pendent mounting 1x36/40W FTL, with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required. |
| 19 | SCHEDULE‘A’ PART-III (Saintary instolation ) |
| 20 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlleddevice (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat |
| 21 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the wallswherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps each 2275.00 |
| 22 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge |
| 23 | Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36mm height of approved quality and colour, weighing not less than 300 gms. |
| 24 | Providing and fixing toilet paper holder :1 C.P. brass |
| 25 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour,weighing not less than 88 gms |
| 26 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. |
| 27 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore |
| 28 | Providing and fixing CP brass angle valve of approved quality15 mm dia nominal bore |
| 29 | Providing and fixing on wall face unplasticised rigid PVC pipes, incl jointing with seal ring, leaving 10 mm gap for thermal expansion, 110 mm dia single socketed pipes |
| 30 | Providing and fixing PVC TEE 110 mm Dia |
| 31 | Providing and fixing PVC Band 110 mm Dia |
| 32 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.75 mm diameter |
| 33 | Providing and fixing 25 mm dua GI pipes complete with GI fittings incl trenching and refilling etc |
| 34 | Providing and fixing 15mm dia GI pipes complete with GI fittings and clamps, i.e cutting and making good the wall etc |
| 35 | Providing and fixing CP brass bib cock of approved quality conforming to IS: 8931, 15 mm nominal bore |
| 36 | Providing and fixing 25 mm dia Gun metal gate valve with CI wheel of approved quality (screwed end) |
| 37 | Providing and fixing polythylene water storage tank (2000 ltr capacity) with cover and suitable locking arrangement |
| 38 | Providing and fixing unplasticised PVC connection pipe with brass unions, 15 mm dia, 45 cm long |
| 39 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 20 mm nominal bore, 120 mm long, weighing not less than 198 gms |
| 40 | Providing and fixing CP brass stop cock of approved quality 20 mm nominal bore |
| 41 | SCHEDULE‘A’ PART-IV (Septc tank) |
| 42 | Constration of 01 nos 50 user septc tank all as per specification and drg No. MRP/Engr/159 Sheet 1/1 |
| 43 | SCHEDULE‘A’ PART-V (Man hole) |
| 44 | Constration of Man hole all as per specification and drg No. MRP/Engr/158 Sheet 1/1 |
| 45 | SCHEDULE‘A’ PART-VI (Sock pit) |
| 46 | Constration of Sock pit all as per specification and drg No. MRP/Engr/158 Sheet 1/1 |
| 47 | SCHEDULE‘A’ PART-VII (Scree Wall) |
| 48 | Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m in all kinds of soil. |
| 49 | Providing and laying in position cement concrete ofgrade 1:3:6 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) excluding the cost of centering and shuttering - All work up to plinth level. |
| 50 | Supplying at site angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling hole 10 mm dia etc. completd |
| 51 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18microns. Sheet should have protective guard film of 25 micronsminimum to avoid scratches during transportation and should besupplied in single length upto 12 metre or as desired by Engineer in-charge. The sheet shall be fixed using self drilling /self tappingscrews of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shapewherever required. |
| 52 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work |
| 53 | SCHEDULE‘A’ PART-VIII (Water Storage Tank) |
| 54 | Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m in all kinds of soil. |
| 55 | Supplying and laying of stone aggregate of 63 mm to 45 mm size stone aggregate for WBM soiling incl screeing, spreading to template and consolidation with power roller complete. |
| 56 | Providing and laying in position cement concrete ofgrade 1:3:6 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) excluding the cost of centering and shuttering - All work up to plinth level. |
| 57 | Providing and laying in position of reinforced cement concrete of grade 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. |
| 58 | Structural steel work riveted, bolted or welded in built up section, trusses and frame work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 59 | Providing and fixing hand rail of approved size by weldingetc to steel ladder railingand similar works incliuding applying priming coat of approved steel primer. |
| 60 | Two or more coats painting with synthetic enamel paint of approved brand and manufacture to give an even shade on new work. |
| 61 | Steel reinforcement for RCC work incl straightening, cutting, bending, placing in position and binding all complete. |
