Tender For Road Safety Work From 0.000 To 5.000 Of Orai Urban Part (Odr) Of Nh-25, 1 Providing And Laying Of Hot Applied Thermoplastic Compound 2.5 Mm Thick Including Reflectorising Glass Beads @ 250 Gms Per Sqm Area, Thickness Of 2.5 Mm Is Exclusive Of, orai-Uttar Pradesh

Tender For Road Safety Work From 0.000 To 5.000 Of Orai Urban Part (Odr) Of Nh-25, 1 Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes . LKO SOR CH. 26 S.No. 2 2 Road Marking with Hot Applied Thermoplastic Compaound with Reflectorising Glass Beads on Bituminous Surface. (Repeated/ Tranvers bar) Providing and laying of hot applied thermoplastic compaound 2.5 mm thick including reflectorising Glass beads @ 250 gms per sqm area. Thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC : 35-2015 The finished surface to be level, uniform and free from streaks and holes. 3 Supply & fixing of Linear Delineator System (LDS) panels made of micro pnsmatic retro reflective sheeting type XI duty laminated on thin aluminium foil to a unique corrugated shape to provide Retro Reflection across wide range of observations and external angles. Eatch LDS panel should be of nominal length of 33 inch and each ridge shall be approximately 0.34 inch high. Each LDS panel is to be firmly fixed on existing concrete/brick with 16 Nos fastner/screw.as per LKO SOR Ch. 26, Sr. No. 9 IRC:79-2019 LDS having 0.820 m length and providing alternatively (Labour Rate) 4 Providing and erecting a W metal crash barriar comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150x75x5 mm spaced 2 m center to center , 1.8 m high, 1.1 m below road/ground level, all steel part and fitments to be galvanised by hot dip process, all fittings to conform to IS: 1367 and IS:1364, metal, metal beam rail to be fixed on the vertical post with a spacer of channer section 150x75x5 mm, 330 mm long complete as per clause 810. Lko SOR SI NO. 27 5 Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3,2mm thick aluminium sheeting, 3mm/4mm thick Aluminum composite material sheet depending on the size of the sign fixed over back support frame of min 25x25x3mm Angle mountedon a mild steelcircular pipe 65 NB ,3.2 mm thicknness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. LKO SOR CH. 26 (Labour Rate) 6 Flexible median marker (FMM) Should be used for improving median visibility duning dark hours, use of median marker provides safty against etc. the rate shall include all material. Labour T&P transportation, installation and incidentals all complete as per direction of the Engineer-in-charge. LKO SOR(Labour Rate) 7 Fixing of Retro Reflective Sign Board. (Labour Rate) 8 Fixing of Retro Reflective Hazard Bolard. (Labour Rate) 9 Fixing of Tree reflector. (Labour Rate) 10 Fixing of Tringil with angle. (Labour Rate) 11 Fixing of Retro Reflective Sollar System. (Labour Rate) 12 Fixing of Retro Reflective Rumbal strip sign board (Labour Rate)

INR 944 /-

INR 200000.0 /-

Refer document