Tender For Below Mentioned Items/Job Work - Designing, Providing & Installation of Sculpture of Shri Chhatrapati Shivaji Maharaj as shown in the picture. The material for this sculpture is Fibre/FRP . The Height of the Statue Sculpture should be min. 6.50 m with base height of min. 3.0 m. Size of the sculpture shall be in proportionate to the height of the sculpture. Thickness of FRP material should be 5-10mm. Cost should be inclusive of design, Making models (if any), making sculpture, inspection charges, Transportation, Fixing at site, Construction of Foundation in RCC- M20 Grade Concrete including Reinforcement(TMT/FE 500),including all material required for fixing the sculpture, coating the pedestal with Coaltar Epoxy Coating, all Filling material upto the base of Sculpture, polishing and painting of the sculpture, as directed by Engineer in Charge. (Variation in size off sculpture shall be +-10% in Length, Width and Height shall be permitted.) Inclusive all taxes Exclulding of GST .etc. Complete. Designing, Providing & Installation of Sculpture of Sculpture of Sainik as shown in the picture. The material for this sculpture is Fibre/FRP . The Height of the Statue Sculpture should be min. 4.50 m with base height of min. 2.50 m. Size of the sculpture shall be i proportionate to the height of the sculpture. Thickness of FRP material should be 5- 10mm. Cost should be inclusive of design, Making models (if any), making sculpture, inspection charges, Transportation, Fixing at site, Construction of Foundation in RCCM20 Grade Concrete including Reinforcement(TMT/FE 500),including all material required for fixing the sculpture, coating the pedestal with Coaltar Epoxy Coating, all Filling material upto the base of Sculpture, polishing and painting of the sculpture, as directed by Engineer in Charge. (Variation in size off sculpture shall be +-10% in Length, Width and Height shall be permitted.) Inclusive all taxes Exclulding of GST .etc. Complete. Designing, Providing & Installation of Sculpture of Shri Chhatrapati Shivaji Maharaj on Throne as shown in the picture. The material for this sculpture is Fibre/FRP . The Height of the Statue Sculpture should be min. 6.50 m. Size of the sculpture shall be in proportionate to the height of the sculpture. Thickness of FRP material should be 5- 10mm. Cost should be inclusive of design, Making models (if any), making sculpture, inspection charges, Transportation, Fixing at site, Construction of Foundation in RCCM20 Grade Concrete including Reinforcement(TMT/FE 500),including all material required for fixing the sculpture, coating the pedestal with Coaltar Epoxy Coating, all Filling material upto the base of Sculpture, polishing and painting of the sculpture, as directed by Engineer in Charge. (Variation in size off sculpture shall be +-10% in Length, Width and Height shall be permitted.) Inclusive all taxes Exclulding of GST .etc. Complete. Providing & Installation of facade system of Curtain wall with DGU ( Argon or better filled Sandwich Glass system with Max. VLT of 45% or lower, very low SHGC) having thickness of 10-12MM thick glass with appropriate fixing system such as Unitised Sysstems, semi-unitised, SS chaannels & panel assembly Inclusive all taxes Exclulding of GST .etc. Complete. Providing & Installation of facade system of Sprandel or Spider with appropriate Alluminium /S.S./M.S. Powder coated section with fixing details, complete with zero water & air seepage & acceptable sound infiltration Inclusive all taxes Exclulding of GST .etc. Complete. Providing & Installation of facade system of Opeque walls, with stone cladding natural or man made/ACP sheets or equivalent material and insulation between the outer and inner surface with with appropriate fixing details,complete with zero water & air seepage inclusive all taxes Exclulding of GST .etc. Complete.
