|
| 1 | M&L for preparing old decoratedwall surfaces , filling of holes and cracks with putty and applying one coat of white washon walls complete all as specified and directed by Engineer-in-Charge. |
| 2 | All as per item No 01 above but on ceilings |
| 3 | M&L for complete removal of existing treatment of walls including preparing old plaster surfaces filling of holes with plaster of paris and applying two coat of oil bounddistemper over applying a coat of wall care putty on walls 1mm thickcomplete all as specified and directed by Engineer-in-Charge. |
| 4 | M&L prepration of old surfaces of walls filling of holes with plaster of paris and applying one coat of oil bounddistempercomplete all as specified and directed by Engineer-in-Charge. |
| 5 | M & L for applying one coat of wall care putty 3mm thick on wall surfaces complete all as specified and directed by Engineer-in-Charge. |
| 6 | M&L for preparation of old painted surface of steel & iron work of any description not specifically mentioned otherwise over 10cm width or girth & applying one coat of synthetic enamal paint complete all as specified and directed by Engineer-in-Charge. |
| 7 | All as per item No 06 above but on Wooden surfaces |
| 8 | Taking down cement plaster, any description, on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc and disposal of debris complete all as specified and directed by Engineer-in-Charge. |
| 9 | M&L for rendering, 15 mm thick, in cement mortar 1:6, over brick or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge. |
| 10 | M&L for rendering,10 mm thick, in cement mortar 1:4 over brick or concrete surfaces, finished fair and even, mixed with water proofing compound @ 3% by weight of cement complete all as specified and directed by Engineer-in-Charge.Note:-Integral water proofing compound shall be measured and paid separately |
| 11 | Supply only integral water proofing compound conforming to IS-2645-1975 complete all as specified and directed by Engineer-in-Charge. |
| 12 | M & L5 mm thick rendering in ceilingsin CM(1:3) finished even & smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 13 | M&L for preparing New plastered surfaces andapplying two coats of distemper oil emulsion on wall surfaces including chalk whitening preparatory to distempering complete all as specified and directed by Engineer-in-Charge. |
| 14 | M & L preparation of new plastered surfaces on walls and applying two coats of cement based paint over a coat of primer complete all as specified and directed by Engineer-in-Charge. |
| 15 | M & L preparation of new plastered surfaces on ceilings and applying three coats of white wash complete all as specified and directed by Engineer-in-Charge. |
| 16 | Dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing) and disposal of debris complete all as specified and directed by Engineer-in-Charge. |
| 17 | M&L for screed bed or bedding layer, 15 mm thick, in cement mortar 1:6 for laying floor finishes complete all as specified and directed by Engineer-in-Charge. |
| 18 | M&L for rendering, 10 mm thick, in cement mortar 1:4, on wall surafaces, as backing coat to tiles complete all as specified and directed by Engineer-in-Charge. |
| 19 | M&L for Non skid ceramic coloured plain tiles,300 x 300 x 7mm thick,first quality,laid in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engineer-in-Charge. |
| 20 | M&L for Glazed ceramic tiles, 300 x 450 x 7mm thick, glossy finish,first quality, of approved colour, laid on vertical surfaces such as skirting or dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engineer-in-Charge. |
| 21 | M&L for Granite 20-22 mm thick (of any type ) (table rubbed and polished ) in floors steps , jambs, pillars,window-cills,cooking plateforms and vertical surfaces bedded and jointed with grey cement slurry and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engineer-in-Charge. |
| 22 | Cleaning & removal all scales & dirt etc, from tanks & from mouths of circulating pipe etc exc 250 but n.exc 500 ltrs capacity complete all as specified and directed by Engineer-in-Charge. |
| 23 | M&L in repair for Vitreous china squatting pan of orissa pattern, size 580 x 440 mm, white, with \"P\" or \"S\" trap, with integral foot rest, including taking out and removal of existing old pan complete all as specified and directed by Engineer-in-Charge. |
| 24 | S&F in repair Vitreous china wash down water closet, pedestal pattern (EWC), white, with \"P\" or \"S\" trap, with PVC water closet seat, black or white, closed pattern, with flat bottom and cover and mild steel chromium plated or aluminised hinging device including taking down and removal of existing old water closet with seat cover complete all as specified and directed by Engineer-in-Charge. |
| 25 | S&F in repair 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flush pipe, complete all as specified and directed by Engineer-in-Charge. |
| 26 | Dismantaling water tanks and removing to store exc 250 but n. exc 500 ltrs complete all as specified and directed by Engineer-in-Charge. |
| 27 | S&Ftripple layered rotational moulded polyethylene water storage tanks of500 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engineer-in-Charge. |
| 28 | S&F in repair Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed in wooden/steel/ Aluminium windows, or Stainless steel wire staples complete all as specified and directed by Engineer-in-Charge. |
| 29 | S & F in repair Stainless steel plate rack (bartan stand) made with 5 mm dia stainless steel rods of minimum 750mmx250mmx750mm size complete all as specified and directed by Engineer-in-Charge. |
| 30 | M&L for welding repair works at small patches like hinges, door closer, window repair, steel door/gate fittings like hinge, bolts, bars etc complete all as specified and directed by Engineer-in-Charge. |
| 31 | S&F 600x450mm looking mirror of selected quality mounted on 6mm thick commercial plywood and fixed to wall with plug and screws etc complete all as specified and directed by Engineer-in-Charge. |
| 32 | S&F in repair bib taps, fancy type CP, screwed for 15mm bore of iron pipe or for brass ferrule and fixed complete all as specified and directed by Engineer-in-Charge. |
| 33 | M&L for Writing letters or figures(Block,Roman,Italic or Indian) n.exc 30 Cm high complete all as specified and directed by Engineer-in-Charge. |
| 34 | Taking down carefully aluminum/copper point wiring (light, fan, switch, socket, power point, holder) complete includind fittings and fixturesand making good disturbed surfaces of walls, floor to match with existing specification complete and all as specified keeping aside serviceable items for reuse within the same bldg and removing U/S items from site complete all as specified and directed by Engineer-in-Charge. Note: Refixing of serviceable fitting shall be measured and paid seperately. |
| 35 | Supply and laying PVC insulated sheathed aluminum conductor cable 10 sqmm two single core 1100 volts grade multistanded conductor served with inner sheathing of PVC tape and overall PVC sheathed for service connections including taking out old u/s complete all as specified and directed by Engineer-in-Charge |
| 36 | Taking down carefully copper / aluminum two core sub main wiring of size 2.5 Sqmm cable any type and removing old material from site and making good disurbed surface complete all as specified and directed by Engineer-in-Charge. |
| 37 | Taking down carefully copper / aluminum two core sub main wiring of sizes 4/6 Sqmm cable any type and removing old material from site and making good disurbed surface complete all as specified and directed by Engineer-in-Charge. |
| 38 | M&L for point wiring complete with 1.5 sqmm single core multistranded copper conductor PVC insulated and unsheathed cable 1100 volts grade FRLS cable IS-694 marked drawn throughand including non metallic rigid PVC conduit medium duty ISI marked not less than 20mm dia, fixed in wall, on roof with GI saddles GI screws, rawal plugs (concealed conduit in wall wiring) with all fittings including Tee, junction boxes and provision of2 mm thick pressed steel terminal box of suitable size with 3 mm thickhylamlaminated white sheet cover for mounting switch sockets and regulators and drawing continuous earth wire with and including PVC insulated unsheathed 1100 volts grade cable with multistranded coper conductor of size 1.5 Sq mm (Nominal area) complete all as specified and directed by Engineer-in-Charge |
| 39 | Allas per itemNo38 above but one three pin 5 Amps socket out let on the same board |
| 40 | Allas per itemNo38 above but one three pin 5 Amps socket out let on independant board |
| 41 | Allas per itemNo38 above but 15 Amps3 pinsocket outleton independent board with 2.5 sq mmPVC insulated and sheathed copper conductor with 2.5 sq mm PVC insulated copper conductor single corefor continuous earthing. |
| 42 | Allas per itemNo38 above but for Single pole and neutral enclosure with 4.0 sq mmPVC insulated and sheathed copper conductor with 4 sq mm PVC insulated copper conductor single corefor continuous earthing. |
| 43 | S&F Piano switch in repairs, flush button,single pole,one way 5/6 Amp complete all as specified and directed by Engineer-in-Charge |
| 44 | S&F piano switch,in repairs, flush button single pole one way 15/16 Amp complete all as specified and directed by Engineer-in-Charge |
| 45 | S&F bell push, in repairs, flush type 5 Amps complete all as specified and directed by Engineer-in-Charge |
| 46 | S&F socket outlet, in repairs,flush type 2 in 1, 2 pin and 3 pin 5 Amp complete all as specified and directed by Engineer-in-Charge |
| 47 | S&F socket outlet, in repairs,flush type 2 in 1, 3 pin and 6/16 Ampcomplete all as specified and directed by Engineer-in-Charge |
| 48 | S&Fstepped type electronic fan regulator, flush type on the existing phenolic laminated sheet etc complete all as specified and directed by Engineer-in-Charge |
| 49 | S&Fin repairs,ceiling rose surface backlight, 65 x 50 mm two to to three terminals complete all as specified and directed by Engineer-in-Charge |
| 50 | S & F in repairs Bell Multi Music type,240 V, complete all as specified and directed by Engineer-in-Charge |
| 51 | Supply and fixin repair Modular switch 1 way 6A, 1 module type, 230 volts, ISI marked complete all as specified and directed by Engineer-in-Charge |
| 52 | Supply and fixin repairModular switch 2 way 6A, 1 module type, 230 volts, ISI marked complete all as specified and directed by Engineer-in-Charge |
| 53 | Supply and fix in repair Modular Bell push 6A 1 module type, 230 volts, ISI markedcomplete all as specified and directed by Engineer-in-Charge |
| 54 | S & Fin repair Modular stepped type electronic fan regulator 2 Module, on the existing laminated sheet etc complete all as specified and directed by Engineer-in-Charge |
| 55 | Supply and fixin repair Socket, 6A - 2/3 pin combined 2 module, multipurpose flush type, ISI markedcomplete all as specified and directed by Engineer-in-Charge |
| 56 | Supply and fixin repair Socket 6A/16A - 2/3 pin combined 2 module, multipurpose flush type, ISI markedcomplete all as specified and directed by Engineer-in-Charge |
| 57 | Supply and fixin repair Modular switch 1 way 16A, 1 module, multipurpose flush type, ISI markedcomplete all as specified and directed by Engineer-in-Charge |
| 58 | Supply and fix in repair Switch flame proof rotary Type with termination box in LM6, 16A, single pole 250V complete all as specified and directed by Engineer-in-Charge |
| 59 | Suppply and fixin repair flame proof switch socket & plug combined in LM 6 cable termination box in LM6, 16A, 250V, 2P+earth complete all as specified and directed by Engineer-in-Charge |
| 60 | Supply and fixin repair modular white cover plate with frame 1 module ISI markedcomplete all as specified and directed by Engineer-in-Charge |
| 61 | Supply and fixin repair modular white cover plate with frame 2 module ISI markedcomplete all as specified and directed by Engineer-in-Charge |
| 62 | Supply and fixin repair modular white cover plate with frame 3 module ISI markedcomplete all as specified and directed by Engineer-in-Charge |
| 63 | Supply and fixin repair modular white cover plate with frame 4 module ISI markedcomplete all as specified and directed by Engineer-in-Charge |
| 64 | Supply and fixin repair modular white cover plate with frame 6 module ISI markedcomplete all as specified and directed by Engineer-in-Charge |
| 65 | Supply and fixin repair modular white cover plate with frame 8 module ISI markedcomplete all as specified and directed by Engineer-in-Charge |
| 66 | Supply and fixin repair modular metal flush box 3 moduleISI markedcomplete all as specified and directed by Engineer-in-Charge |
| 67 | Supply and fixin repair modularAmp combined box with 6/16 switch and socketISI marked complete all as specified and directed by Engineer-in-Charge |
| 68 | Supply and fixin repair flushed inside the wall MS sunken box more than 1mm thicknes of size 4\"x4\" complete all as specified and directed by Engineer-in-Charge |
| 69 | Supply and fixin repair flushed inside the wall MS sunken box more than 1mm thicknes of size 7\"x4\" complete all as specified and directed by Engineer-in-Charge |
| 70 | Supply and fixin repair flushed inside the wall MS sunken box more than 1mm thicknes of size 8\"x10\" complete all as specified and directed by Engineer-in-Charge |
| 71 | S&F in repairs,sheet metal enclosure for MCB DB\"s SPN 240 volts, 4 way with neutral bus bar 200 Amp rated double door type regal grey complete all as specified and directed by Engineer-in-Charge |
| 72 | S&F in repairs,sheet metal enclosure for MCB DB\"s SPN 240 volts, 8 way with neutral bus bar 200 Amp rated double door type regal grey complete all as specified and directed by Engineer-in-Charge |
| 73 | All as per item No 72 above but 12 ways DBscomplete all as specified and directed by Engineer-in-Charge |
| 74 | All as per item No 72 above but TPN DB, 4 ways DBscomplete all as specified and directed by Engineer-in-Charge |
| 75 | S&F in repairs,Single pole and neutral enclosure with a two pin and earth plug and socketcomplete with one single pole MCB 32 Amp complete all as specified and directed by Engineer-in-Charge |
| 76 | M&L in repairs,two single core PVC insulated cable with copper conductor multi stranded 2.5 Sqmm duly drawn through and including concealed PVC conduit 20mm dia, medium grade ISI marked, as sub main with continuous earth wire 2.5 Sqmm size and connecting to common earth dolly complete all as specified and directed by Engineer-in-Charge .(Flexible Copper Wire Used in FRLS) Note : Two run of main wire, one run of earth wire and one run of PVC conduit shall be measured as one unit. |
| 77 | M&L for two single core PVC insulated cable with copper conductor multi stranded 6 Sqmm duly drawn through and including concealed PVC conduit medium grade ISI marked 25mm dia as sub main wiring with continuous earth wire 6 Sqmm size and connecting to common earth dolly complete all as specified and directed by Engineer-in-Charge. Note : Two run of main wire, one run of earth wire and one run of PVC conduit shall be measured as one unit. |
| 78 | Allas per item No 77 above but with 4.0 sq mmPVC insulated and sheathed copper conductor with 4 sq mm PVC insulated copper conductor single corefor continuous earthing |
| 79 | S&F in repairs MCB SP 6 to 32 Amps 240 Volts.\"B\" grade complete all as specified and directed by Engineer-in-Charge |
| 80 | S&F in repairs MCB,SP 40 Amps, 240 Volts.\"B\" grade complete all as specified and directed by Engineer-in-Charge |
| 81 | S&F in repairs MCB,SPN 6-32 Amps, 240Volts,\"B\" grade complete all as specified and directed by Engineer-in-Charge |
| 82 | S&F in repairs MCB SPN, 40 Amps, 240Volts .\"B\" grade complete all as specified and directed by Engineer-in-Charge |
| 83 | S&F in repairs MCB SPN, 63 Amps, 240Volts.\"B\" grade complete all as specified and directed by Engineer-in-Charge |
| 84 | S&F in repairsMCB TPN 40 Amps,415Volts .\"B\" grade complete all as specified and directed by Engineer-in-Charge |
| 85 | S&F in repairs MCB TPN, 63 Amps,415Volts .\"B\" grade complete all as specified and directed by Engineer-in-Charge |
| 86 | S&F in repairs,LED tube light batten 22W LED,6000K (4 ft.), 230 volts AC,Wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver connector block,lamp etc complete with all accessories, internally pre-wired including twin core twisted flexible copper conductor of suitable size with PF -0.95,THD-10%,driver should be of same make as LED fitting,with in build over voltage ,under voltage and short circuit protection with operating range of 140 volst to 280 volts,isolation LED driver complete all as specified and directed by Engineer-in-Charge |
| 87 | S&F in repairs,LED tube light batten,9/10W(+) 2% LED 6000K (2 ft.), 230 volts AC,Wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver connector block,lamp etc complete with all accessories, internally pre-wired including twin core twisted flexible copper conductor of suitable size with PF -0.95,THD-10%,driver should be of same make as LED fitting,with in build over voltage ,under voltage and short circuit protection with operating range of 140 volst to 280 volts,isolation LED driver complete all as specified and directed by Engineer-in-Charge |
| 88 | S&F in repairs,LED false ceiling panel fittings ,1x45W/1x40W LED 6000K (2ftx2ft.), 230 volts AC,suitable for false ceiling, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver connector block,lamp etc complete with all accessories, internally pre-wired including twin core twisted flexible copper conductor of suitable size with PF -0.95,THD-10%,driver should be of same make as LED fitting,with in build over voltage ,under voltage and short circuit protection with operating range of 140 volst to 280 volts,isolation LED driver complete all as specified and directed by Engineer-in-Charge |
| 89 | Supply and fixing LED Lamp 36/40 Watts high Efficiency PMMA diffuser soft glare free light complete and including provision of three core textile braided copper conductor flexible wire from ceiling rose to light fitting complete all as specified and directed by Engineer-in-Charge |
| 90 | Supply and fixing Decorative type LED-Post top 40Watts,230 V, IP 65, 5700K rated with control driver with efficiency 90% pure coated aluminium die cast and spun aluminium body with clear/opal diffuser suitbale for landscape lighting for uniform illumination prewired including all accessories and connecting up with twin core copper conductor with suitable size complete all as specified and directed by Engineer-in-Charge |
| 91 | Taking down ceiling fan complete any type size from existing location andcleaning body blades etc including greasing,oiling,replacing wornout bearing ,bush and refixing the same at site complete all as specified and directed by Engineer-in-Charge |
| 92 | All as per item No. 91 above but for Exhaust fan 300 mm sweep |
| 93 | All as per item No 91 above but for Exhaust fan 450 mm sweep complete |
| 94 | All as per item No 91 above but for wall/floor mounted fan 450 mm sweep |
| 95 | M&L for Rewinding unserviceable ceiling fan 1200/1400 mm Sweep from siteby strip opening,cutting removing the burnt winding from starter cleaning the slots and rewind the same with original guage of super enameled copper winding wire, insulation materials and all accessories & varnishing etc replacement of service wire copper twisted size 23/0.0076 including reassembling the fan complete all as specified and directed by Engineer-in-Charge |
| 96 | All as per item No 95 above butfor Exhaust fan 300 mm sweep |
| 97 | All as per item No 95 above butfor Exhaust fan 450 mm sweep |
| 98 | All as per item No 95above butfor wall/floor mounted fan 450 mm sweep |
| 99 | S&F in repairs Capacitor 2.5 mfd suitable for Ceiling Fan/Wall fan/Exhaust Fan complete all as specified and directed by Engineer-in-Charge |
| 100 | S&F in repairs Capacitor 3.15 mfd suitable for Ceiling Fan/Wall fan/Exhaust Fan complete all as specified and directed by Engineer-in-Charge |
| 101 | S&F in repairs Capacitor 4.0 mfd suitable for Ceiling Fan/Wall fan/Exhaust Fan complete all as specified and directed by Engineer-in-Charge |
| 102 | S&F in repair ball bearingsuitable for 1200/1400mm sweep complete all as specified and directed by Engineer-in-Charge |
| 103 | S&F in repair FR PVC electrical insulation tape,1.8 cm x 25 mtr x0.125 mm thick complete all as specified and directed by Engineer-in-Charge |
| 104 | S&F ceiling fan down rod 15 mm bore 45 cm long GI pipe light grade including cutting and threading suitable for hanging of ceiling fan 1200mm/1400mm sweep complete all as specified and directed by Engineer-in-Charge |
| 105 | S&F ceiling fan down rod 15 mm bore 1 mtr long Gi pipe light grade including cutting and threading suitable for hanging of ceiling fan 1200mm/1400mm sweep complete all as specified and directed by Engineer-in-Charge |
| 106 | Taking down storage water heater 25 ltrs capacity from wall for repair/replacement of unserviceable parts and refixing with fasterners Nuts and washers the same location after repair work complete all as specified and directed by Engineer-in-Charge |
| 107 | M&L for replacement of thermostate 0-60 degree in water geyser 25/50 litre capacityISI marked as per sample complete all as specified and directed by Engineer-in-Charge |
| 108 | M&L for replacement of heating element 1.5KW,Triangular/round type ISI marked as per sample complete all as specified and directed by Engineer-in-Charge |
| 109 | M&L for replacement of heating element 2 KW with complete assembly of any model and type as per site requirement /sample ISI marked complete all as specified and directed by Engineer-in-Charge |
| 110 | Materialand Labour for disconnecting from electric and water mains and dismantling the unserviceable gyeser base assembly and replacing the new base assembly 6/9 holes with rubber gasket for 25 Ltrs capacity of any make and refixing in original place including recoonecting of electric and water supply mains including testingcomplete all as specified and directed by Engineer-in-Charge |
| 111 | M&L for replacement of geyser outer body cover of 25 Ltr capacity made out stainless steel of 16 SWG powder coated completewith all connected accessories suitably fitted with existing wall all as specified and directed by Engr-in-Charge. |
| 112 | M&L for replacement of geyser tank stainless steel suitable for 25 Ltr capacity geyser complete all as specified and directed by Engineer-in-Charge |
| 113 | M&L for replacement of PVC connection with brass inserts suitable for hot/cold water, 60 cm long (for hot and cold water inlet and outlet) having PTMT nuts with washer complete all as specified and directed by Engineer-in-Charge |
| 114 | S & F in replacementof bottom cover suitable cylindrical type geyser as per existing required for 25 Ltrs capacity complete all as specified and directed by Engineer-in-Charge |
| 115 | Dismantling and opening storage tank of geyser 25 litre capacity to identify the leakage ,repair the spot by suitable welding carefully including making good insulating material, assembling and testing complete all as specified and directed by Engineer-in-Charge |
| 116 | S & F in replacementof indicationlamp red and green (pilit type ISI marked) for 25Ltrs capacity water heater complete all as specified and directed by Engineer-in-Charge |
| 117 | Supply and fixing in replacementof PVC insulated flexible copper conductor cable 40/0.0076 size 3 core suitablefor 650 volts grade complete all as specified and directed by Engineer-in-Charge |
| 118 | S & F in replacement of glass wool in any capacity of geyser complete all as specified and directed by Engineer-in-Charge |
| 119 | S&F in repairs,Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 32 Amp complete all as specified and directed by Engineer-in-Charge |
| 120 | S&Fwall mountingfan motor for 450 mm sweepcomplete all as specified and directed by Engineer-in-Charge |
| 121 | S&F in repairs metal blades suitable for 1200/1400 mm sweep ceiling fan set of 3 blades complete all as specified and directed by Engineer-in-Charge |
| 122 | S & F Recess mounted LED Light Fitting 15 Wattpressure die-cast aluminium luminaire in powder coated white finish in round/square profile with optimized heat sink for efficient heat dissipation and incl separate replaceable electronic driver compatible forAnalog/DALI Dimming complete all as specified and directed by Engineer-in-Charge |
| 123 | Supply and fix in replacement of old u/s ventilation fan PVC (250 mm Sweep) with louvers and acessories complete all as specified and directed by Engineer-in-Charge |
| 124 | Supply and fix in replacement of old u/s ventilation fan PVC (200 mm Sweep) with louvers and acessories complete all as specified and directed by Engineer-in-Charge |
| 125 | S&F in repair aluminium thimbles of size 35 sqmm complete all as specified and directed by Engineer-in-Charge |
| 126 | S&F in repair aluminium thimbles of size 50 sqmm complete all as specified and directed by Engineer-in-Charge |
| 127 | S&F in repair aluminium thimbles of size 70 sqmm complete all as specified and directed by Engineer-in-Charge |
