Tender For Day To Day Maintenance To Bsnl Buildings In Jalandhar Ssa For Theyear 2024-25; 1 Providing and laying cement concrete in retaining walls, return walls,walls (any thickness) including attached pilasters, columns, piers,abutments, pillars, posts, struts, buttresses, string or lacing courses,parapets, coping, bed blocks, anchor blocks, plain window sills, fillets,sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing 2 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) 3 Brick work with common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5 in superstructure above plinth level up to floor V level inall shapes and sizes in : 4 Cement mortar 1:6 (1 cement : 6 coarse sand) 5 Providing and fixing 6mm thick commercial plywood of ISI marked and BWR grade of approved make in counters,cupboards etc. i/c cost of fevicol,nails complete in all respect as per direction of Engineer-in-Charge. 6 Providing and fixing 12 mm thick commercial plywood of ISI marked and BWR grade of approved make in counters,cupboards etc. i/c cost of fevicol,nails complete in all respect as per direction of Engineer-in-Charge. 7 Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws excluding, panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. 8 Red/Yellow Mirandi wood 9 35 mm thick shutters 10 Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 11 Red/Yellow Mirandi wood 12 30 mm thick 13 Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws: 14 Red/Yellow Mirandi wood 15 30 mm thick 16 Providing and fixing 6mm thick Bekelite Sheet of ISI marked of approved make in counters,cupboards etc. i/c cost of rubber,fevicol,nails complete in all respect as per direction of Engineer-in-Charge. 17 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 gradedstone aggregate) finished with a floating coat of neat cement, includingcement slurry, but excluding the cost of nosing of steps etc. complete 18 40 mm thick with 20 mm nominal size stone aggregate 19 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), includingfinishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : 20 In 75x75 mm deep chase 21 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with sealring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,(i) Single socketed pipes. 22 110 mm diameter 23 White washing with lime to give an even shade : 24 Old work (one or more coats) 25 Distempering with 1st quality acrylic distemper (ready made) havingVOC content less than 50 gm per ltr. of approved manufacturer and of required shade and colour complete. as per manufacturer’s specification. 26 One or more coats on old work 27 Finishing walls with water proofing cement paint of required shade 28 Old work (one or more coats @ 2.20 kg/10 sqm) complete 29 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 30 One or more coats on old work. 31 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 metres lead : 32 With cement mortar 1:4 (1 cement : 4 fine sand). 33 Renewing glass panes, with wooden fillets wherever necessary: 34 Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) 35 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: 36 Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) 37 Re-grading terracing of mud phaska covered with tiles or brick, in cement by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud phaska to proper slope, relaying mud plaster gobri leaping and tiles or bricks, grouted in cement mortar 1:3 (1 cement : 3 fine sand) including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded) within 50 metres lead. 38 Flush pointing with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement for flat tile bricks on top of mud phaska : 39 With F.P.S. brick tiles 40 Repair to leaking G.I.water supply pipe line by dismantling the G.I. pipe, replacing the GI pipe and fittings where required and restoring the water supply upto 15 metre height all complete as per direction of the Engineer-in-Charge.( GI pipes and fittings shall be paid for separetely). 41 Re-setting of existingaluminum door/window shutters , tightening of cleats etc. refixing of pivots or aluminium hinges or rubber gasket/floor spring/door fittingswherever required including steel screws etc. all complete 42 Repair to floor trap/P-trap etc. with neat cement slurry including mixing of water proofing solution to prevent leakage as per the direction of Engineer-in-Charge. 43 Removal of Plants like Pipal Plant etc. from the roofs,shafts and from other parts of the Building at all heights and removing its roots,And pouring solution of Chlorpyriphos E.C 20% in the root of plants and making good the same complete as per direction of Engineer-in-Charge(Girth not exceeding 10 cm) 44 Repairs to existing steel rolling shutters by dismantling the shutter,setting it right by removal of dents, tensioning of coil springs, greasing of side guides,straighting of main shafts etc. and refixing the shutters at its proper position and ensuring free operation of shutter all complete as per the directions of Engineer-in-Charge. 45 Water proofing Coating ontile terracing under solar panels placed at roofby using Sika Latex SBR or equivalentwith Cement sand mortar in ratio (1:1:2:2 = Sika Latex® SBR :Water : Cement : Fine sand)as per direction of Engineer-in-Charge with following procedure: Thoroughly pre-wet the prepared substrate. Keep the surface wet and do not allow to dry.Before application remove excess water e.g. with a clean sponge. The surface shall appear a dark matt appearance without glistening and surface pores and pits shall not contain water. Prepare the waterproofing coating as indicated above. Using a stiff clean brush spreadthe coating vigorously onto the substrate,forming a thin layerAfter 2 to 6 hours, apply the second coat in crosswise direction to first coat. 46 Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terraceincluding shifting at ground level as per direction of Engineer-in- charge. 47 Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. 48 Terracecleaning including removal of rank vegetations,grass etc. and cleaning of connecting khurra and rodding of RWP to ensure smooth flow of rain water and disposalof rubbish upto 50m lead all complete as per direction of Engineer-in-Charge. 49 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all loads including all lifts involved. 50 Providing the Plumbing services with Semi skilled fitter for attending day to day complaints on urgent basis like repair of water supply equipments and sanittary installations in the BSNL Compounds within Jalandhar and also attend the BSNL Civil Division Jalandhar office for cleaning, mopping the office, carrying office files etc.all as per the direction of E-I-C.The agency shall provide all necessary tools and plants,ladder and scaffolding wherever required including Mobile Phone and instructions to the worker for attending the complaints.(Nothing extra shall be paid on this account.The materials/fittings required shall be paid for separately). The services for payment are for one month i.e. Per Job Per Month. 51 Extra for providing plumbing services in the item No. 31 above foroutside the Jalandhar city i.e. in the BSNL buildings under the Jalandhar Business Area. 52 Providing the Carpenterservices with skilled Carpenter for attending day to day complaints on urgent basis like repair of doors,windows and chowkhats in the BSNL Compounds within Jalandhar Business Area as per the direction of E-I-C.The agency shall provide all necessary tools and plants,ladder and scaffolding wherever required including Mobile Phone and instructions to the worker for attending the complaints.(Nothing extra shall be paid on this account.The materials/fittings required shall be paid for separately). The services for payment are for one Day ie Per Job Per Day 53 Providing Beldar to assist Plumber / Carpenterfor attending day to day complaints in the BSNL Compounds within Jalandhar Business Area as per the direction of E-I-C. The services for payment are for one Day ie Per Job Per Day 54 Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator,supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewerline from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm 55 Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per thedirection of Engineer-in-charge. 56 Cleaning of Manholes including taking out the sludge,rubbish and other forgien materials for smooth and free flow of sewage water all complete as per the direwction of E-I-C. 57 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 58 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) 59 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.. 60 In cement mortar 61 Providing and fixing white vitreous china water closet squatting pan (Indian type) 62 Orissa pattern W.C. pan of size 580x440 mm 63 Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. 64 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 65 Supplying the following items as and when required as per approved brand and approved manufacturer( ISI marked) complete as perdirection of Engineer-In-Charge. 66 P.V.C. low level Flushing Cistern10 litre capacity (In all colours as per direction of EIC) 67 White Plastic seat (solid) with lid, C.P. brass hinges and rubber buffers 68 Vitreous china flat back wash basin550 x 400mm 69 Flexible (coil shaped) PVC waste pipe for sink and washbasin 32 mm dia with length upto 700mm i/c PVC waste fittings. 70 Rectangular shape 453x357 mm Mirror with Plastic moulded frame 71 Brass face/spindlefor C.P. brass pillar cocks/ bib cocks/stop cocks etc. 72 CP stainless jali grating 73 100mm dia 74 Hydraulic door closer tubular type Aluminium section body 75 Aluminium hanging floor door stopper with twin rubber & stopper 76 Brass bib-cock 15 mm dia 77 Brass stop-cock 15 mm dia 78 CP bass bib cock confirm to IS:8931 79 15mm nominal bore 80 CP brass long body bib cock confirm to IS:8931 81 15mm nominal bore 82 CP brass angle valve confirm to IS:8931 83 15mm nominal bore 84 Ball valve (brass) of approved quality, High or low pressure, with plastic floats- 15 mm nomonal bore 85 Uplasticised PVC connection pipe with brass unions 86 45 cm length 87 15mm nominal bore 88 CP spray jet for european wc pan,15mm nominal bore 89 CP brass pillar cock (Heavy type) confirm to IS:8931 90 15mm nominal bore 91 G.I. pipes of Jindal/ Surya Prakash make for water supply 92 15mm dia nominal bore 93 20mm dia nominial bore 94 CPVC pipes of approved make for water supply including accessories. 95 25mm dia nominal bore 96 20mm dia nominial bore 97 PTMT bib cock 98 15mm nominal bore 99 PTMT stop cock 100 15mm nominal bore 101 PTMT pillar cock 102 15mm nominal bore 103 PTMT grating circular type 104 100mm nominal bore 105 PVC tank cover for all sizes of PVC tank 106 Aluminium Tower Bolts 107 200 x 10mm 108 150 x 10mm 109 Aluminium Handles 110 100mm 111 75mm 112 Aluminium Sliding Door bolts 113 200 x 16mm 114 4mm thick plywood BWP( commercial ) 115 Mild steel wire guage (galvanised) aperture 1.4 mm and 0.50 mm dia wire 116 PVC handle & ball cock for cistern with washer 117 Syphon set complete for PVC Cistern 118 20mmPTMT ball cock weight not less than 198gms with plastic ball 119 25mmPTMT ball cock weight not less than 440gms with plastic ball 120 Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg., for doors, including cost of cutting floors ,embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. 121 With stainless steel cover plate minimum 1.25 mm thickness. 122 Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc.complete. 123 Credit for old dismantled/unserviceable material: - 124 Brass bib cock/stop cock/ball valves/CP bibcock/CP stop cock,C.P angle cock,CP pillar cock,CP shower rose,brassgate valves, CP ring,CP brass towel rail etc. of all dia 125 Floor door spring machines 126 G.I. pipe 15mm nominal bore 127 G.I. pipe 20mm nominal bore 128 Hydraulic door closer
