Tender For Annual Maintenance Contract At Ushp I Sumbal, sumbal-Jammu And Kashmir

Tender For Annual Maintenance Contract At Ushp I Sumbal- 1 Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil : For drains clearance in power house and colony etc 2 Providing and fixing G.I. pipes complete with G.1. fittings excluding trenching and refilling etc.(external work) 15 mm dia. nominal bore 3 Providing and fixing G.I. pipes complete with G.1. fittings excluding trenching and refilling etc.(external work) 20 mm dia. nominal bore 4 Providing and fixing G.I. pipes complete with G.1. fittings excluding trenching and refilling etc.(external work) 40 mm dia. nominal bore 5 Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 6 Providing and fixing brass bib cock of approved quality. 20mm nominal bore 7 Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 8 Providing and fixing geyser of approved make conforming to IS as per directions of Engineer in charge. 50ltr 9 Providing and fixing kitchen sink including making all connections excluding cost of fittings : White glazed fire clay sink of size 600x450x250 mm. 10 Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required. 15 mm nominal bore 11 Union 20 mm nominal bore 12 Union 25 mm nominal bore 13 Union 40mm nominal bore 14 Union 50 mm nominal bore 15 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) 15 mm nominal bore 16 20 mm nominal bore 17 40 mm nominal bore 18 50 mm nominal bore 19 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank 20 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. PN-16 pipe, 16mm OD(SDR-7.4) 21 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints . PN-16 pipe, 25mm OD(SDR-7.4) 22 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. PN-16 pipe, 20mm OD(SDR-7.4) 23 Providing and fixing PPR Unions PPR Union 20mm 24 Providing and fixing PPR Union 25mm 25 Providing and fixing brass stop cock of approved quality.15 mm nominal bore 26 Providing LED Lamps (LMR) 27 20 mm nominal bore 28 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15 mm nominal bore 29 20 mm nominal bore 30 Making soak pit 2.5 m diameter 3.0 meter deep with 45x45 cm dry brick honey comb shaft with common burnt clay (non modular) bricks of class designation 7.5 bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. 31 Constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20m long complete as per standard design. 32 Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. lushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. 33 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. 34 Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture 35 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) 36 Removing white or colour wash by scrapping and sand papering andpreparing the surface smooth including necessary repairs to scratches etc. complete. 37 Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required shade on old work to give an even shade. 38 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work. 39 Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 1 mm thick 40 Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand) 41 Random Rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including levelling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) and curing complete at window sills, ceiling level and the like: Cement mortar 1:6 (1 Cement : 6 coarse sand) Quarry 42 providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class kail wood 43 Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). Kiln seasoned & chemically treated hollock wood 35mm 44 Stainless Steel Fittings Providing and fixing ISI: 12817 marked Stainless Steel Butt Hinges with Stainless Steel screws etc. complete. 100x58x1.90 mm 45 Providing and fixing bright finished brass tower bolts (barrel type) withnecessary screws etc. complete. 100x10 mm 46 Providing and fixing bright finished brass handles with screws etc. complete :100 mm 47 Engaging of Blacksmith 1st class 48 Engaging of Carpenter 1st class 49 Engaging of Fitter (Grade 1) 50 Engaging of Mason (for brick work) 1st class 51 Engaging of labour

INR 270 /-

INR 10000.0 /-

INR 5 Lakhs /-