Tender For Renovation Of Ladies And Gents Washroom At First Floor, Esd Division, Ecil, Hyderabad - 1 1.1 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10mm to 25mm 2 2.1 Dismantling G.I. pipes (external /internal work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : 15 mm to 40 mm nominal bore 3 3.1 Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge: Up to 150 mm diameter 4 4.1 Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 75 to 80 mm dia pipe 5 4.2 Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 100 mm dia pipe 6 5.1 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. : Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) 7 6.1 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar 8 7.1 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area 3 sq. metres and below 9 7.2 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area beyond 3 sq. metres 10 8 Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. 11 9 Removal of EWC, IWC, wash basin etc., with fittings etc., complete and as per the direction of Engineer-in-charge. 12 10.1 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) 13 11.1 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more 14 12.1 Centering and shuttering including strutting, propping etc. and removal of form for all heights Lintels, beams, plinth beams, girders, bressumers and cantilevers 15 13.1 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) 16 14 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. 17 15.1 15 mm cement plaster on rough side of single or half brick wall of mix 1:4 (1 cement: 4 coarse sand) 18 16 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Make: JK Putty/ Birla Putty 19 17.1 Distempering with 1st quality acrylic distemper (ready made) VOC content less than 50 gm per ltr. of approved manufacturer and of required shade and colour complete. as per manufacturer s specification. One or more coats on old work 20 18.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Make: Asian/ Berger/ Nerolac Two or more coats on new work 21 19.1 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Make: Asian/ Berger/ Nerolac/ Indigo One or more coats on old work 22 20.1 Wall painting with premium acrylic emulsion paint of interior grade, VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats 23 21.1 Finishing walls with Acrylic Smooth exterior paint of required shade. Old work (One or more coat applied @ 0.90 ltr/10 sqm). 24 22.1 Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 25 23.1 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer 26 24 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete 27 25 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Make: Nitco/ Kajaria/ Somany 28 26 Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 29 27 Providing and fixing WPC (wood plastic composite) work in frame of doors, clerestory windows and other frame of thickness 75mm windows door shutter of thickness 25mm including S.S. pressed butt hinges of required size etc., complete and as directed by Engineer-in-charge. 30 28 Providing and fixing doors, windows and ventilators made with UPVC (Unplasticised polyvinyl chloride) including door/window/ventilator suitable sections with necessary fixtures, fasteners and panel filling with 5mm thick float for ventilators etc. complete and as directed by Engineer-in-charge.Make: Finesta/ Orient 31 29 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. 32 30.1 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 300x10 mm 33 31.1 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete . 125 mm 34 32.1 Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm 35 33.1 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter 36 33.2 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter 37 34.1.1 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Make: Sudhakar/ Ashirvaad/ Astral Single tee without door 110x110x110 mm 38 34.2.1 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Make: Sudhakar/ Ashirvaad/ Astral Bend 87.5 degrees 75 mm bend 39 34.2.2 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Make: Sudhakar/ Ashirvaad/ Astral Bend 87.5 degrees 110 mm bend 40 34.3.1 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Make: Sudhakar/ Ashirvaad/ Astral Shoe (Plain) 110 mm Shoe 41 35.1 Providing and fixing PVC pipeline with necessary fittings etc., as directed by Engineer-in-charge 40mm dia 42 36 Supplying and fixing 100mm PVC nahani trap with CP steel gratings, bitumen painted before fixing and making good the floor as good as original, CP double jali etc., complete and as directed by Engineer-in-charge. 43 37.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. Make: Sudhakar/Ashirvaad/Astral 25 mm nominal outer dia Pipes 44 38.1 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. Make: Hindware/ Parryware W.C. pan with ISI marked white solid plastic seat and lid 45 39.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require. Make: Hindware/ Cera. White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap 46 40 Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. Make: Hindware/ Parryware 47 41 Providing and fixing 1000x600mm beveled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete 48 42 Providing and fixing 1500x600mm beveled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete 49 43.1 Providing and fixing brass bib cock of approved quality. Make: Cera/ Seico 15mm nominal bore 50 44.1.1 Providing and fixing unplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore 51 45.1 Providing and fixing CP health faucets of approved quality and make with all fittings. Make: Cera/ Parryware/ Hindware 15mm nominal bore 52 46.1 Providing and fixing CP brass two in one tap of approved quality. Make: Hindware/ Parryware 15mm nominal bore 53 47.1.1 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32 mm dia 54 48 Providing and fixing CP brass angle cock of quality & make as approved by Engineer-in-charge. 15mm dia. Make: Cera/ Seico 55 49 Providing and fixing SS towel ring round shape of size 200mm dia with flange and minimum distances of wall face with concealed fittings arrangement of approved quality and colour, complete and as directed by Engineer-in-charge. Make: Hindware/ Cera 56 50 Providing and fixing Soap dispenser or hand wash dispenser of approved quality as per direction of Engineer-in-charge (standard make with prior approval of Engineer-in-charge) 57 51 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting,unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. 58 52 Providing and fixing ball valve (CPVC) of approved quality, high or low pressure, etc. and as directed by Engineer-in-charge 59 53.1 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: .................... Please go through the Detailed Scope of Work for further description of item. 60 54 Providing and fixing toilet paper holder, complete and as directed by Engineer-in-charge. Make: Hindware/ Cera/ Parryware 61 55 Supplying and fixing SS grab handle (25mm dia) of length 300mm with all fittings complete and as directed by Engineer-in-charge 62 56.1 Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Single half stall urinal without 5 litre P.V.C. automatic flushing cistern 63 57 Providing and fixing CP spray jet for EWC (European type WC pan) complete and as directed by Engineer-in-charge. 64 58 Providing and fixing white glazed vitreous Urinal partition/ division fixed with brass screws embedded in the wall including making necessary repairs etc. complete and as directed by Engineer-in-charge 65 59.1.1 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 100x100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 66 60 Providing and fixing CP brass urinal push cock of approved quality and colour complete and as directed by Engineer-in-charge 67 61 Supplying & fixing automatic hand dryer of approved quality as per direction of Engineer-in-charge (Standard make) 68 62 Supply and fixing brass toilet door hanger hooks including necessary screws and labour for fixing etc. complete and as directed by Engineer-in-charge. 69 63.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 70 64 Supplying and fixing vertical venetian blinds 4 inch width as per users requirement with necessary accessories and approved colour etc. complete and as directed by Engineer-in-charge 71 65.1 Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Size 600x450x200 mm
