}

Tender For Construction And Repair Work To Fulfill The Prescribed Parameters In Primary School Balak No. 46 Badam Nagar Under Operation Kanyakalp Scheme In Ward No. 85, 1 Excavation In Foundation In Ordinary Soil (Loam, Clay Or Sand) Including Lift Upto, aligarh-Uttar Pradesh

Municipal Corporation has published Tender For Construction And Repair Work To Fulfill The Prescribed Parameters In Primary School Balak No. 46 Badam Nagar Under Operation Kanyakalp Scheme In Ward No. 85, 1 Excavation In Foundation In Ordinary Soil (Loam, Clay Or Sand) Including Lift Upto. Submission Date for this Tender is 19-07-2024. Kitchen Equipment Tenders in aligarh Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

44169786
Tender For Construction And Repair Work To Fulfill The Prescribed Parameters In Primary School Balak No. 46 Badam Nagar Under Operation Kanyakalp Scheme In Ward No. 85, 1 Excavation In Foundation In Ordinary Soil (Loam, Clay Or Sand) Including Lift Upto
Open Tender
NCB
Uttar Pradesh
Aligarh
19-07-2024

Tender Details

Tender For Construction And Repair Work To Fulfill The Prescribed Parameters In Primary School Balak No. 46 Badam Nagar Under Operation Kanyakalp Scheme In Ward No. 85, 1 Excavation in foundation in ordinary soil (Loam, Clay or Sand) Including lift upto 1.50 m and lead upto 30m and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer In-charge upto a distance of 30m from the foundation trenches by Hydraulic excavator/manual means. For Building/ Drain work only. 2 Providing and laying cement concrete in 1:6:12 (1 cement : 6 Fine sand : 12 Graded stone aggregate 40mm nominal size) including supply of all material, labour and T&P etc. required for proper completion of the work. In Foundation and floors. 3 Providing and laying in position specified grade of reinforced cement concrete, including the cost of centering, shuttering, finishing and excluding reinforcement - All work up to plinth level : (a) 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) 4 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. including cost of centering, shuttering, finishing and excluding reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) 5 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation-150 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand) 6 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 150 in superstructure above plinth level up to floor V level in all shapes and sizes in :: Cement mortar 1:4 (1 cement : 4 coarse sand) 7 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, including the cost of centering, shuttering, finishing and excluding reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). 8 M.S or Iron work in plain work such as reinforced concrete or reinforced brick work (When not included in and an over all rates) brought to required shape as necessary of the work and including the suply of steel and its wastage bend, hooks and authorized over lapping shall be measured upto floor to level. 9 12 mm cement plaster on brick work with cement mortar of mix (upto 10 mtr height from Ground level) (II) 1:4 (1 cement : 4 Coarse sand) 10 Providing and laying cement concrete in 1:4:8 (1 Cement : 4 Fine sand : 8 graded stone aggregate 40 mm nominal size) including supply of all material, labour and T&P etc. required for proper completion of the work.In Foundation and floors. 11 Providing and laying vitrified floor tiles in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all coloums and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. (B) Without lean concrete. (ii)600×600 mm size tiles 12 Providing and laying Ceramic glazed floor tiles of size 300×300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. 13 Providing and laying cement concrete in 1:2:4 (1 Cement : 2 Coarse sand : 4 graded stone aggregate 20 mm nominal size) including supply of all material, labour and T&P etc. required for proper completion of the work. All work upto plinth level 14 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including cost of all material, Labour, T&P etc. complete required for proper completion of the work. 15 Finishing walls (Two coats) with water proofing cement paint of approved make such as Super snowcem, Durocem, Robiance, Guttucem, Supercem quality and of required shade on undecorated wall surface over and including one coat white cement primer to give and even shade after thoroughly brushing the surface, including cost of all material, Labour, T&P etc. complete required for proper completion of the work. 16 S/F Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). 17 Providing and fixing angle/Tee iron frames for doors, windows and ventilators of mild steel Angle sections of size 35×35×5 mm, joints mitred and welded by angle iron 35×35×5 mm or 35×5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. 18 Supply and fixiing ward robe shutters made of 18 gauge (1.25 mm) M.S sheets including cold rolling of required shape and including supply & fixing of approved qualitiy locks handle etc. Complete including supply of all material labourand T&P spray painting etc. complete 19 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required: (B) Kitchen sink without drain board ii) 610×460 mm bowl depth 200 mm 20 P.V.C. Water Storage Tank Sintex or Equivalent 21 Drainage System and Water Supply System 22 Electric Fitting charge 23 Providing and laying vitrified floor tiles in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all coloums and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. (A) With lean concrete (ii)600×600 mm size tiles 24 Excavation in foundation in ordinary soil (Loam, Clay or Sand) Including lift upto 1.50 m and lead upto 30m and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer In-charge upto a distance of 30m from the foundation trenches by Hydraulic excavator/manual means. For Building/ Drain work only. 25 Providing and laying cement concrete in 1:6:12 (1 cement : 6 Fine sand : 12 Graded stone aggregate 40mm nominal size) including supply of all material, labour and T&P etc. required for proper completion of the work. In Foundation and floors. 26 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation-150 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand) 27 Providing and laying D.P.C 25 mm thick with Cement concrete Consisting of 1:1.5:3 (1 Cement : 1.5 Coarse Sand : 3 approved 5.6 mm graded Stone grit) and including water proofing martreial as approved by the Engineer-In-Charge in the proportion as specified by manufacturer. 28 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 150 in superstructure above plinth level up to floor V level in all shapes and sizes in :: Cement mortar 1:4 (1 cement : 4 coarse sand) 29 Providing and laying in position specified grade of reinforced cement concrete, including the cost of centering, shuttering, finishing and excluding reinforcement - All work up to plinth level : (a) 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) 30 M.S or Iron work in plain work such as reinforced concrete or reinforced brick work (When not included in and an over all rates) brought to required shape as necessary of the work and including the suply of steel and its wastage bend, hooks and authorized over lapping shall be measured upto floor to level. 31 12 mm cement plaster on brick work with cement mortar of mix (upto 10 mtr height from Ground level) (II) 1:4 (1 cement : 4 Coarse sand) 32 Providing and laying cement concrete in 1:4:8 (1 Cement : 4 Fine sand : 8 graded stone aggregate 40 mm nominal size) including supply of all material, labour and T&P etc. required for proper completion of the work.In Foundation and floors. 33 Providing and laying cement concrete in 1:2:4 (1 Cement : 2 Coarse sand : 4 graded stone aggregate 20 mm nominal size) including supply of all material, labour and T&P etc. required for proper completion of the work. All work upto plinth level 34 Providing and laying Ceramic glazed floor tiles of size 300×300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. 35 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including cost of all material, Labour, T&P etc. complete required for proper completion of the work. 36 Finishing walls (Two coats) with water proofing cement paint of approved make such as Super snowcem, Durocem, Robiance, Guttucem, Supercem quality and of required shade on undecorated wall surface over and including one coat white cement primer to give and even shade after thoroughly brushing the surface, including cost of all material, Labour, T&P etc. complete required for proper completion of the work. 37 Painting on Steel/G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution. 38 S/F Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). 39 Providing and fixing angle/Tee iron frames for doors, windows and ventilators of mild steel Angle sections of size 35×35×5 mm, joints mitred and welded by angle iron 35×35×5 mm or 35×5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. 40 Supply and fixiing ward robe shutters made of 18 gauge (1.25 mm) M.S sheets including cold rolling of required shape and including supply & fixing of approved qualitiy locks handle etc. Complete including supply of all material labourand T&P spray painting etc. complete 41 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430×260×350 mm or 340×410×265 mm sizes respectively. 42 P.V.C. Water Storage Tank Sintex or Equivalent 43 Making Soak pit 2.5m diameter 3.0m deep with 45x45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100mm diameter, 1.8m long complete as per standard design. With F.P.S. bricks 44 Drainage System and Water Supply System 45 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 metres lead : (a) With cement mortar of mix 1:4 (1 cement : 4 fine sand) (not less than in 1.25 FM) 46 Providing and laying Ceramic glazed floor tiles of size 300×300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. 47 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including cost of all material, Labour, T&P etc. complete required for proper completion of the work. 48 Finishing walls (Two coats) with water proofing cement paint of approved make such as Super snowcem, Durocem, Robiance, Guttucem, Supercem quality and of required shade on undecorated wall surface over and including one coat white cement primer to give and even shade after thoroughly brushing the surface, including cost of all material, Labour, T&P etc. complete required for proper completion of the work. 49 Providing and fixing angle/Tee iron frames for doors, windows and ventilators of mild steel Angle sections of size 35×35×5 mm, joints mitred and welded by angle iron 35×35×5 mm or 35×5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. 50 Supply and fixiing ward robe shutters made of 18 gauge (1.25 mm) M.S sheets including cold rolling of required shape and including supply & fixing of approved qualitiy locks handle etc. Complete including supply of all material labourand T&P spray painting etc. complete 51 Providing and laying cement concrete in 1:2:4 (1 Cement : 2 Coarse sand : 4 graded stone aggregate 20 mm nominal size) including supply of all material, labour and T&P etc. required for proper completion of the work. All work upto plinth level 52 Construction of padestal Granite stone etc all complete. 53 Add 18% GST 54 The Total value of Schedule4

Key Value

Document Fees
INR 2360 /-
EMD
INR 162000.0 /-
Tender Value
INR 16.16 Lakhs /-
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail