Tender For Work of basic amenities in Block No. 22 Firdaus Nagar under Operation Kanyakalp in Ward No. 64, 1 Cleaning of site such as garbage and silt /Photography 2 Dismantling existing plaster including disposal of refuse as directed by Engineer-In-Charge within a distance of 60 meters. 3 Dismantling cement concrete or brick or granolithic floors including base concrete stacking of dismantled materials as directed by Engineer-In-Charge within a distance of 60 meters (200 feet). 4 Scrapping old white or colour wash including disposal of refuse as directed by Engineer-In-charge within a distance of 60 meters (200 feet) 5 Providing and laying cement concrete in 1:6:12 (1 cement : 6 Fine sand : 12 Graded stone aggregate 40mm nominal size) including supply of all materials, labours and T&P etc. required for proper completion of the work. In Foundation and floors. 6 Class-150 (Non Modular) brick work in 1:4 cement and Coarse sand mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work. (Coarse Sand not less than 2.25 FM) 7 S/F 6mm (1/4) thick china white glazed tiles on walls or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement jointed and polishing complete including supply of all materials, labours required for proper completion of the work. 8 Providing and laying vitrified floor tiles in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 9 P/F and fixing angle / Tee iron frames For door , window , and ventilators of mild steel angle section of size 35x35x5mm joints mitred and welded by angle iron 35x35x5mm or 35x5mm flat pieces to theexistting T-iron frame or to the wall with dash fastner including fixing of necessarybutt hinges and screws and applying a priming coat of approved steel primer all complete as per the direction of Eng. -in-charge. 10 Providing and laying cement concrete in 1:2:4 (1 Cement : 2 Coarse sand : 4 graded stone aggregate 20 mm nominal size) including supply of all materials, labours and T&P etc. required for proper completion of the work. All work upto plinth level 11 S/F Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). including preparation of 50mm thick base with concrete 1:4:8Cement, Coarse sand and 40 mm B/B complete as per E/I 12 12 mm cement plaster in 1:4 on brick work with cement mortar of mix (All floors) 13 Finishing walls with Putty (2 mm thick) approved brand and manufacture and of required shade and undacorated wall surface to give even shade including curing, cost of all materials, labours, T&P etc. required for proper completion of the work. 14 Distempering (Twocoat) with oil bound distemper of approved brand and manufacture and of required shade on undercoated wall surface to give an even shade over & including a priming coat with cement primer of approved brand and manufacture such as Berger, J&N, Shalimar, Asian, paints after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even with plaster of approved synthetic material and sand papered smooth including cost of all materials, Labours, T&P etc. complete required for proper completion of the work. 15 Finishing walls (Two coats) with exterior emulsionpaint (Apex) ofapproved brand and manufacture and of required shade on undacorated wall surface to give even shade @ 1.25 Ltr/10sqm including one coat of primer applied @ 0.75Ltr/10sqm curing, cost of all materials, labours, T&P etc. required for proper completion of the work. 16 (a) Applying priming coat with enemal paint over new steel and other metal surface upto 10cm. In width or girth or small not exceeding 0.10 Sqm area after and including preparing the surface by thoroughly clearing oil, grease, dirt and other foreign matter and scoured with wire brushed, fine steel/wood. Scrapper, sand papering and knotting including cost of all materials, labour T&P etc. required for proper completion of work. 17 Supply and fixing of flush doors, commercial quality conforming of I.S. 2202 part-1 (1983) including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges, bolts, locks, handles, springs, fitting with necessary screws to be supplied departmentally 18 (v) Mosquito/Fly Proof Stainless Steel grade 304 wire mesh gauge with 0.50 mm dia wire and 1.40mm wide aperture. 19 Wiring point for light. 20 P/F of CFL with holder. 21 P/F of Celling Fan 1200mm 22 P/F of Exshust Fan 1200mm 23 Supply & Stackingof 22.4-53 mm gauge Stone ballast etc complete. 24 Laying & Consolidation of 22.4-53 mm gauge Stone ballast 10cm thick (loose)coat including repiring of patches picking up old surface spreading ,ballastbmaking medhies to retain water and carriage of water upto 200m maintenance of barriers and all labour T&P etc required for proper completion of work .including road roller charges 25 Supply & Stackingof stone dust etc complete. 26 Laying of I shaped precast Interlocking tiles of thickness 60 to 100mm (Compressive strength not less then 30Mpa and weight 4.50Kg.) Including 25mm thick local sand base levelling and dressing of surface to required level and slope, filling joints with local sand all complete work. Including VAT 27 Excavation in foundation in ordinary soil (Loam, Clay or Sand) Including lift upto 1.50 m and lead upto 30m and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer In-charge upto a distance of 30m from the foundation trenches. (Where machine can not reach/move) For Building work only 28 Providing and laying cement concrete in 1:6:12 (1 cement : 6 Fine sand : 12 Graded stone aggregate 40mm nominal size) including supply of all materials, labours and T&P etc. required for proper completion of the work. In Foundation and floors. 29 Class-150 (Non Modular) brick work in 1:4 cement and Coarse sand mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work. (Coarse Sand not less than 2.25 FM) 30 S/F 6mm (1/4) thick china white glazed tiles on walls or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement jointed and polishing complete including supply of all materials, labours required for proper completion of the work. 31 Providing and laying vitrified floor tiles in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 32 P/F and fixing angle / Tee iron frames For door , window , and ventilators of mild steel angle section of size 35x35x5mm joints mitred and welded by angle iron 35x35x5mm or 35x5mm flat pieces to theexistting T-iron frame or to the wall with dash fastner including fixing of necessarybutt hinges and screws and applying a priming coat of approved steel primer all complete as per the direction of Eng. -in-charge. 33 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, including the cost of centering, shuttering, finishing and excluding reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). 34 Mild steel or iron work in plain work such as reinforced concrete or reinforced brick work (When not included in and an over all rates) brought to required shape as necessary including bending for proper completion of the work and excluding the supply of steel and its wastage Bend, hooks and authorized over lapping shall be measured upto floor to level. 35 Providing and laying cement concrete in 1:2:4 (1 Cement : 2 Coarse sand : 4 graded stone aggregate 20 mm nominal size) including supply of all materials, labours and T&P etc. required for proper completion of the work. All work upto plinth level 36 12 mm cement plaster in 1:4 on brick work with cement mortar of mix (All floors) 37 Finishing walls with Putty (2 mm thick) approved brand and manufacture and of required shade and undacorated wall surface to give even shade including curing, cost of all materials, labours, T&P etc. required for proper completion of the work. 38 Distempering (first coat) with oil bound distemper of approved brand and manufacture and of required shade on undercoated wall surface to give an even shade over & including a priming coat with cement primer of approved brand and manufacture such as Berger, J&N, Shalimar, Asian, paints after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even with plaster of approved synthetic material and sand papered smooth including cost of all materials, Labours, T&P etc. complete required for proper completion of the work. 39 Finishing walls (Two coats) with exterior emulsionpaint (Apex) ofapproved brand and manufacture and of required shade on undacorated wall surface to give even shade @ 1.25 Ltr/10sqm including one coat of primer applied @ 0.75Ltr/10sqm curing, cost of all materials, labours, T&P etc. required for proper completion of the work. 40 (a) Applying priming coat over new steel and other metal surface upto 10cm. In width or girth or small not exceeding 0.10 Sqm area after and including preparing the surface by thoroughly clearing oil, grease, dirt and other foreign matter and scoured with wire brushed, fine steel/wood. Scrapper, sand papering and knotting including cost of all materials, labour T&P etc. required for proper completion of work. 41 (36) P.V.C. Water Storage Tank Sintex or Equivalent 42 (B) Brass bib cock (Gem Mikado/Excesss Williams of eqv.) 43 Wash basin of white glazed earthen ware of Sizes - 44 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : 45 Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 46 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. (a) 15 mm nominal outer dia Pipes 47 (b) 20 mm nominal outer dia Pipes 48 Providing and fixing PVC pipe confirming to IS make working pressure 6 Kg./Cm2 incuding testing labour T&P and all complete fittings 49 Providing and fixing white vitreous china flat back half stall urinal of size 580×380×350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required: 50 Supply and fixing of flush doors, commercial quality conforming of I.S. 2202 part-1 (1983) including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges, bolts, locks, handles, springs, fitting with necessary screws to be supplied departmentally 51 (v) Mosquito/Fly Proof Stainless Steel grade 304 wire mesh gauge with 0.50 mm dia wire and 1.40mm wide aperture. 52 S/Fixing of Granite Stone with pedestal 53 Add 18% GST 54 The Total value of Schedule4
