|
| 1 | Laying and Jointing PVC Pipe. Heading |
| 2 | surface dressingof ground including removing vegetation and in equalities not exceeding 15 cm deep and disposalof rubbish . Lead up to 50cm and lift up to 1.5m all kind of soil |
| 3 | earth work in surface excavation not exceeding 30cm in depth but exceeding 1.5m in width as well as 10sqm on plan including getting out and disposal of excavated earth up to 50m and lift up to 1.5m .as directed by engineer in charge 2.1.1 all kinds of soil. Short wall |
| 4 | excavating . Supplying and filling of local earth (including royalty ) by mechanical transport up to a lead of 5km also includingramming and watering of the earth in layers not exceeding 20cm in trenches. Plinth . Sides of foundation etc. complete |
| 5 | providing & laying of c.c in 1:6:12 with c/s and 40mm G.S.B in foundation of floor i/c all labour. Material and T&P etc. |
| 6 | R.C.C work in column slab wall 1:2:4 with cement coarse sand 20mm gauge stone grit i/c all complete. |
| 7 | M- 150 brick workin 1:4cement and course sandmortar in sub- structure i/c all labour & T&P etc. |
| 8 | 12mm thick internal plaster in 1:3 with c/s mortar in wall i/c all materials , labour & T&P etc .s.l.-586 |
| 9 | providing & laying steelbars including cutting binding .placing and complete by engineer in charge |
| 10 | m.s iron door and window with ms angle and ms sheet ic all complete as directed by engineer in charge. |
| 11 | mild steel or iron work in heavy size such as trusses. Build up gates record racks roof work gates etc wrought to required form including drilling holes riveting or welding where necessary and their fixing required completion of the work |
| 12 | mild steel or iron work in small sizeand section such as holding down bolts. Hold fast tie rods . Grating etc. (when not included in an overall rates ) wrought to required shape as necessary for bending etc including supply of steel and its wastage including cost of bolts . nuts if required . welding . grinding and marking holes as required for completion of work but . |
| 13 | providing and fixing precoated galvanised iron sheets (size ,shape and pitch of corrugation as approved by enggineer -in-charge) 0.50mm(+0.05%) total coated thickness with zinc coating 120 grams per sqm as per is:277,in 240mpa steel grade 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns sheet should have protective guard film of 25 microns minimum to avoid scratches during transportion and shold be suoolied in single length up to 12 metre or as desired by engineer -in-charge , the sheet shall be fixed using self drilling/self tapping screws up to any pitch in horizontal /vertial or curved surface excluding the cost of purtlins , rafters and shape wherever required |
| 14 | supply &fixing 5 mm thick approved china white /coloured glazed tiles in flooring or dado laid with 1:3 cement and approved coarse sand mortar finished ad jointed with white cement slurry and pigment & polishing complete including suppiy of all materials , labour and T&P etc |
| 15 | Supply & fixing 9 mm to thick approved china white /coloured glazed tiles in flooring or dado laid with 1:3 cement and approved coarse sand mortar finished and jointed with white cement slurry and pigment & polishing complete including supply of all materials labour and T&P etc required for proper complition of the work (Size of tiles up to 600x600mm) |
| 16 | Distepring (First Coat) with oil bound distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with cement primer of approved brand and manufacture such as Berger,J&N Shalimar, Asian Paints after thoroughly brushing the surface free from mortar dropping and other foreign matter and also including prepairing the surface even with Plaster of Paris or approved synthetic synthetic material and sand papered smooth including cost of all material. |
| 17 | Painting of wood or iron work including sand preparing rubbing and cleaning as required for proper complition of work (two coats) |
| 18 | Painting or vamishing on iron work in small areas or new wood work with one coat of ready mixed primming paint & one coat of approved supperior quality ready mixed paint of clear synthetic varnish including supply of all material, labour and t&p etc.required for proper compaction of the work paints to be used should confirm. |
| 19 | Providing and applying putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 20 | Supply and fixing 32mm thick flush door all complte |
| 21 | Supply and fixing aluminum flush door allcomplete fitting bathroom and latrin 32mm flush door all compite fitting. |
| 22 | Supply and fixing 32mm flush door ply wood with handile fitting all complte |
| 23 | wiring points for light with 1.5sqm mm P.V.C insulated single core aluminium conductor cable in heavy guage rigidsteel pipe on surface complete with 8 SWG G.learth continuty wire piano type switch and ceiling rose /angle /batten holder on 3mm thick phenlic laminated backelite- sheet etc complete in all respect as. |
| 24 | wiring points for fan air fan (inogrety exhaust fan) with 1.50sqmm P.V.C insulated single core aluminium conductor cable in heavy guage rigidsteel conduit pipe on surface,complete with 8SWG G.I earth continuty wire piano type switch and ceiling rose langle /batten holder on 3mm thick phenlic laminated backelite-sheet etc complete in all respect as. |
| 25 | wiring points for plug with 1.50sqmm P.V.C insulated single core aluminium conductor cable in heavy guage rigidsteel conduit pipe on surface complete with 8SWG G.I earth continuty wire piano type switch and socket etc complete in all respect as. |
| 26 | S/F of 18W hewells make all fitting complete M.R |
| 27 | S/F of LED 12 W hewells make all fitting complete M.R |
| 28 | Septic tank of appropriate capacity for 2 years cleaning interval for 50 users |
| 29 | S/F of low density polythene seamless one piece moulded tank and placing the same in proper position including all |
| 30 | Providing and fixing G.I pipe all fitting |
| 31 | Providing and fixing sanitary pipe all fitting |
| 32 | Providing and fixing WC pan median type with cast iron P and trap all complete with automatic flushing |
| 33 | ORIGINAL Supply and fixing 25mm PVC pipe in position all complete12345878IN UNIQUE QUALITY |
| 34 | Supply and fixing 25mm PVC pipe in position all complete |
| 35 | Supply and fixing 30mm dia socket |
| 36 | 200mm dia drilling and 350mm dia running from ground level to 50m below ground level in alluvial soil up to sand steata. |
| 37 | Supply and lowewring of 150 mm dia PVC plain casting pipe |
| 38 | Supply and fixing of 150mm dia End Cap. |
| 39 | Supply and fixing of 150mm dia Top Cap. |
| 40 | Supply and fixing of 150mm dia Centerlize |
| 41 | P/F 550x400mm hand wash basin of white glazed earthen ware ISI marked (Hindustan neyer cera make) I/C Supply of all marerial labour and t&p comp. |
| 42 | P/F flat back 465x355mmx265mm size lipped from urinal basin of white glazed earther were first quality (Hindustan neycer) |
| 43 | P/F polyvinyl chloride (CPVC) pipe 20mm dia |
| 44 | P/F polyvinyl chloride (CPVC) pipe 15mm dia |
| 45 | P/F bib brass bib cock 400 gms vc all |
| 46 | Making water connection of Gl pipe line with GI main as in SI 210 |
| 47 | PVC low level cistern 10lir capacity with all internal fitting of PVC etc |
| 48 | Hand pump with submercble |
| 49 | Display bord |
| 50 | GST 18% |
