}

Tender For Remaining Work Of Panchayat Ghar Near Shiv Mandir In Village- Pali, Greater Noida, 1 Boq 2 Cement Concrete With 4Cm Gauge Approved Stone Ballast, Coarse Sand & Cement In The Proportion Of 8:4:1 Including Supply Of All Materials, Labour, Too, noida-Uttar Pradesh

Local Bodies has published Tender For Remaining Work Of Panchayat Ghar Near Shiv Mandir In Village- Pali, Greater Noida, 1 Boq 2 Cement Concrete With 4Cm Gauge Approved Stone Ballast, Coarse Sand & Cement In The Proportion Of 8:4:1 Including Supply Of All Materials, Labour, Too. Submission Date for this Tender is 19-07-2024. Tanks and Cylinders Tenders in noida Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

44127049
Tender For Remaining Work Of Panchayat Ghar Near Shiv Mandir In Village- Pali, Greater Noida, 1 Boq 2 Cement Concrete With 4Cm Gauge Approved Stone Ballast, Coarse Sand & Cement In The Proportion Of 8:4:1 Including Supply Of All Materials, Labour, Too
Open Tender
Indian
Uttar Pradesh
Noida
19-07-2024

Tender Details

Tender For Remaining Work Of Panchayat Ghar Near Shiv Mandir In Village- Pali, Greater Noida, 1 BOQ 2 Cement concrete with 4cm gauge approved stone ballast, coarse sand & cement in the proportion of 8:4:1 including supply of all materials, labour, tools & plants etc. required for proper completion of the work. (UPPWD/SOR-2020/281) 3 M-150 brick work in 1:4 one cement and four coarse sand 2.20 F.M. mortarincluding supply of all material, labour, T&P etc. required for proper completion of the work. But in superstructure including necessary Cutting & moulding of brick as required thickness of walls not to be less than 1½ brick. Add extra labour to above items. (UPPWD/SOR-2020/309) 4 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. 5 Using M.S. angles 40x40x6 mm for diagonal braces. (DSR-18/10.5.1/ AR) 6 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.(Sail Steel) 7 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar worksDSR-18/10.25.2 8 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 9 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)DSR-18/5.1.2 10 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.(Sail Steel) 11 Thermo-Mechanically Treated bars of grade Fe-500D or more./Cold twisted bars.(DSR-2018/5.22.6/AR) 12 12mm cement plaster of mix: 1:6 (1 cement : 6 coarse sand) (DSR-18/13.4.2/ AR) 13 15mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1 cement : 6 coarse sand) (DSR-18/13.5.2/ AR) 14 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work.DSR-18/13.99.1/A.R 15 Finishing walls with water proofing cement paint ofrequired shade: New work (Two or more coats applied @ 3.84 kg/10 sqm)UPPWD/SOR-2020/660+661 16 52 mm thick CC flooring with concrete hardener topping under layer 40 mm thick cement concrete 1:2:4 and top layer 12 mm thick cement hardener consisting of mix 1:2 by volume....DAR- Item Code: 11.4 17 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size DSR-18/Item Code: 4.1.3 18 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge, inskirting, risers of steps and dados, over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (DSR-18/11.36/ AR) 19 P/F g.i. pipes complete with g.i. fitting and clamps, i/c cuttion and making good the walls etc. 20 15mm dia nominal boreDSR-18/Item Code: 18.12.1 21 P/F g.i. pipes complete with g.i. fitting and clamps, i/c cuttion and making good the walls etc. 22 20mm dia nominal boreDSR-18/Item Code: 18.12.2 23 P/F g.i. pipes complete with g.i. fitting and clamps, i/c cuttion and making good the walls etc. 24 25mm dia nominal boreDSR-18/Item Code: 18.12.3 25 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 26 15 mm nominal bore. DSR-18/Item Code: 18.49.1 27 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (DSR-2018/12.42.1.2/AR) 28 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Bend 87.5 : 75 mm bend (DSR-2018/12.42.1.2/AR) 29 Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. :for 100 mm dia pipe(DSR- 18/17.37.1/AR) 30 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 31 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. (DSR-2018/17.78/AR) 32 Providing and fixing 100mm sand cast iron grating for gully trap 33 Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White vitreous China wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps. (DSR-18/17.7.1/ AR) 34 Kota stone slab flooring over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of 1:4 cement mortar 1:4 (1 cement : 4 coarse sand).25mm thick. (DSR-18/11.26.1/ AR) 35 Labour cess will be paid extra as per applicable 36 GST will be paid extra as per applicable

Key Value

Document Fees
INR 840 /-
EMD
INR 23000.0 /-
Tender Value
INR 11.39 Lakhs /-
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail