Tender For Repairing Maintenance Installation Of Machineries For Different Trade Courses Of Govt Industrial Training Institute Durgapur-- 1 Repairing, maintenance & Installation of Machineries for different trade courses of Govt. Industrial Training Institute, Durgapur 2 Pedastal Grinder - FITTER TRADE Brief Fault Description : To be installed 3 Drilling Machine Maya make-1 - FITTER TRADE Brief Fault Description : Defective Starter 4 Drilling Machine Jayems Make-1 - FITTER TRADE Brief Fault Description : Spindle locking arrangement damaged, V-Belt to be changed 5 Drilling Machine Kerry Make-1/2 - FITTER TRADE Brief Fault Description : Spindle Alignment and locking arrangement damaged, V-Belt to be changed 6 Lathe machine PSG make-6, No.-2457 - FITTER TRADE Brief Fault Description : Not Running, Overall Maintenance Reqd. 7 Lathe machine Pathak make-Heavy Duty - FITTER TRADE Brief Fault Description : Spindle Noise, shifting lever of feed gear box to be rectified. Needs overhauling 8 Lathe machine Pathak make-All Geared - FITTER TRADE Brief Fault Description : Oil filling Reqd. in Head Stock, auto feed to be adjusted 9 Pneumatics Kit - FITTER TRADE Brief Fault Description : Three Solenoid valves are not working 10 Cylindrical Grinding Machine, M/c No : 24,HMT - Machinist (Grinder) TRADE Brief Fault Description : Machine is not running due to the1) Mechanical Problem : Overhauling,2) Electrical problem. 11 Surface GrindingMachine, M/c No : 4228 , 451 AP, Make : Praga - Machinist (Grinder) TRADE Brief Fault Description : Magnetic chuck is not magnetise. 12 Power Saw Machine, M/C : 01, Make : Pathak - Machinist (Grinder) TRADE Brief Fault Description : Hydraulic Problem. 13 Power Saw Machine, M/C : 496, Make : High Cut, Model : 09 - Machinist (Grinder) TRADE Brief Fault Description : Hydraulic Problem. 14 Horizontal Milling Machine, M/c No : ML(H)-10 - Machinist TRADE Brief Fault Description : Machine is not running due to the 1) Mechanical: longitudinal travell of the table Not working.2) Electrical problem 15 Lathe Machine M/c No :L- 1 - Machinist TRADE Brief Fault Description : Electrical Problems 16 Lathe Machine M/c No :L- 2 - Machinist TRADE Brief Fault Description : 1) Electrical problems in main switch. 2) Mechanical : Spindle rotate but not taken load when feed the work piece. 17 Lathe Machine M/c No :L- 3 - Machinist TRADE Brief Fault Description :Thread cutting Mechanism is not working. 18 Lathe Machine M/c No :L- 4 - Machinist TRADE Brief Fault Description : Four jaw chuck is not working due to the broken stud. 19 Universal Milling Machine, M/c No : ML(H)- 07 - Machinist TRADE Brief Fault Description : Electrical Problems : Starter is not working. 20 Horizontal Milling Machine, M/c No : ML(H)-08 - Machinist TRADE Brief Fault Description : Thread cutting is not possible due to the broken change gear teeth. 21 Horizontal Milling Machine, M/c No : ML(H)-09 - Machinist TRADE Brief Fault Description : Machine is running condition but different electrical operating switches are broken . 22 Vertical Milling Machine, M/c No : ML(V)-03 - Machinist TRADE Brief Fault Description : Machine is not running due to theElectrical problem. Also the gear oil level indicator cap is broken and some operating switches are not working . 23 Vertical Milling Machine, M/c No : ML(V)-05 - Machinist TRADE Brief Fault Description : Machine is not running due to theElectrical problem. Operating switches are not working . 24 Power Saw Machine, M/C : 01 - Machinist TRADE Brief Fault Description : Machine is not running due to theElectrical problem. 25 Vertical Milling Machine, M/c No : ML(V)-05 - Machinist TRADE Brief Fault Description : Machine isrunning condition but different electrical operating switches are broken and starter is not working. 26 Power Saw Machine, M/C : 01 - Machinist TRADE Brief Fault Description : Hydraulic system is not working. 27 Lathe Machine (Superprise 1650) M/C No. 10 - Turner TRADE Brief Fault Description : Head Stock & Tail Stock problem, cross slide problem, Full machine overhauling 28 Lathe Machine (Superprise 1650) M/C No. 11- Turner TRADE Brief Fault Description : Head Stock & Tail Stock problem, cross slide problem, New Tool Post required, Full machine overhauling 29 Lathe Machine: M/C No. 12- Turner TRADE Brief Fault Description : Head Stock & Tail Stock problem, cross slide problem, Electrical problem Full machine overhauling 30 Lathe Machine: M/C No. 13- Turner TRADE Brief Fault Description : Head Stock & Tail Stock problem, cross slide problem, Electrical Panel problem, Full machine overhauling. New tool post required. 31 Lathe Machine: M/C No. 14- Turner TRADE Brief Fault Description : Head Stock & Tail Stock problem, cross slide problem, New Tool Post required, Full machine overhauling 32 Lathe Machine: M/C No. 15- Turner TRADE Brief Fault Description :Head Stock & Tail Stock problem, cross slide problem, Electrical Panel problem, Full machine overhauling 33 Lathe Machine: M/C No. 16- Turner TRADE Brief Fault Description :Head Stock & Tail Stock problem, cross slide problem, Head Stock motor belt required and also Full machine overhauling 34 Lathe Machine: M/C No. 17 - Turner TRADE Brief Fault Description : Head Stock & Tail Stock problem, cross slide problem, Head Stock motor belt changing and also Full machine overhauling 35 Lathe Machine (Superprise 1650) M/C No. 20 - Turner TRADE Brief Fault Description : Motor pulley problem 36 Lathe Machine (Superprise 1650) M/C No. 21 - Turner TRADE Brief Fault Description : Tail Stock problem, Carriage problem, Full machine overhauling. 37 Lathe Machine (HMT) M/C No. 23 - Turner TRADE Brief Fault Description : Head Stock & Tail Stock problem, Electrical panel repairing, Full machine overhauling 38 Pedestal Grinding Machine - Turner TRADE Brief Fault Description : Full machine overhauling with wheel changing 39 Power Saw Machine - Turner TRADE Brief Fault Description : Hydraulic Problem 40 Power HackSaw Machine ( HIGH CUT ) - Welder TRADE Brief Fault Description : Only Hydraulic failure 41 Hydraulic HackSaw Machine (PATHAK) - Welder TRADE Brief Fault Description : Total Mechanical and electrical fault starting from motor 42 Drilling Machine - Welder TRADE Brief Fault Description : Motor not running, Belt torn 43 Hand Shearing Machine - Welder TRADE Brief Fault Description : Cutting Jaw is bend 44 Grinding Machine - Welder TRADE Brief Fault Description : Machine is vibrating, Grouting problem in foundation
