Bids Are Invited For PROCUREMENT OF RAW MATERIAL, 1 AUSTENITIC TYPE (303) FREE MACHINING NON-MAGNETIC BRIGHT QUALITY STAINLESS STEEL ROUND, SPECIFICATION HAL STD 1206 / 303, ASTM A 582 SIZE DIA 40 MM X 1 TO 2 METERS IN LENGTH. 2 MILD STEEL COLD DRAWN ROUND CONFORMING TO HAL STD 1001, IS 1570 PART II , GRADE C 20 / EN 3 B , BS 970 / BS 070 M 20, BS 970 SIZE DIA 45 MM X 1 TO 2 METERS IN LENGTH. 3 AUSTENITIC TYPE (303) FREE MACHINING NON-MAGNETIC BRIGHT QUALITY STAINLESS STEEL ROUND, SPECIFICATION HAL STD 1206 / 303, ASTM A 582 SIZE DIA 7 MM X 2 TO 3 METERS IN LENGTH 4 MATERIAL AUSTENITIC TYPE (303) FREE MACHINING NON-MAGNETIC BRIGHT QUALITY STAINLESS STEEL ROUND, SPECIFICATION HAL STD 1206 / 303, ASTM A 582 SIZE DIA 12 MM X 2 TO 3 METERS IN LENGTH. 5 AUSTENITIC TYPE FREE MACHINING NON-MAGNETIC BRIGHT QUALITY STAINLESS STEEL ROUNDS CONF.TO HAL STD 1206,AISI-303-GR18/10,DIA 14MM 2 TO 3 MTRS LENGTH. 6 AUSTENITIC TYPE (303 SE) FREE MACHINING NON-MAGNETIC BRIGHT QUALITY STAINLESS STEEL ROUND ROD CONFORMING TO HAL STD 1206 / 303 SE, ASTM A 582 / AMS 5641 / AMS 5640 TYPE 2 / MIL-S-7720, 303 SE / BS 303 S 41, BS 970 / AISI 303 SE SIZE DIA 20 MM X 2 TO 3 METERS IN LENGTH. 7 AUSTENITIC TYPE FREE MACHINING NON MAGNETIC BRIGHT QUALITY STAINLESS STEEL HEXAGONAL BAR, SPECIFICATION HAL STD 1206 / 304, ASTM A 276 GRADE 18/10, SIZE A/F 10MM X 2 TO 3 METERS IN LENGTH. 8 NAVAL BRASS RODS, CONDITION ANNEALED, CONFORMING TO IS 291 1989, GRADE 1, / HAL STD 1302 / BS 2824 GR CZ-112, SIZE DIA 4MM X 2 TO 3 METERS IN LENGTH 9 BRASS WIRE, RIVETTING QUALITY, CONDITION ANNEALED CONFORMING TO IS 4413, GRADE CUZN 37 / HAL STD 1303, SIZE DIA 2.5MM OF STANDARD LENGTH 10 COPPER TUBE CONFORMING TO HAL STD 1311, CONDITION DRAWN, AS PER BS 2871 PART 2, C101 / IS 2501, ETP TUBE SIZE OD 6 MM X 0.5 MM (ID 5.0 MM) X 2 TO 3 METERS IN LENGTH AND ENDS SHOULD BE COVERED WITH END CAPS. 11 BARE COPPER WIRE DIA 0.8 MM CON.TO IS 2982-65. HAL STD 6054 IN SPOOL. 12 BARE COPPER WIRE, CONDITION ANNEALED, CONFORMING TO HAL STD 6054 GRADE B / IS 8130 / BS 128 / ASTM B-3, SIZE DIA 0.5 MM IN SPOOLS. 13 COPPER SHEETS CON.TO IS 191-PART V (GRADE ETP) CONDITION HB , HAL STD 1310 -HB, SIZE thickness 1/2 inch OR 13MM X 350 X 1200MM. 14 AL. ALLOY SHEET HAL STD 1252-1/2H,IS-737-74 GR.31000 (NS-3)1/2H, BS 1470 GR.NS3 OR ENAW 573-3-3103,H14 SIZE thickness 0.8 MM X 1000 X 2000M WITH PVC COATING ON BOTH SIDES. 15 ALUMINIUM ALLOY SHEETS,HAL STD 1252-1/2H, SIZE thickness 1.6MM X1000 X 2000MM, BS 1470-3103-H14 (NS-3)-1/2 H (H-4), IS 737-GR31000(NS 3),HALF HARD WITH PVC COATING ON BOTH SIDES. 16 ALCLAD AL.ALLOY PLATES, SPEC. 2014/2014 A-T6 /WP/T651, CLADDING 1050 A /1070 /19500/19700/6003 ON BOTH SIDES AS PER GR 24345-WP AL.CLAD, IS 736/AL.CLAD 2014 ,ASTM B209/ D.T.D 5040 A/HAL STD 1250, TH. thickness 10 MM, MIN. SIZE 1000X1000MM, TOLERANCES AS PER ANSI H35.2/ HAL STD. 1250. 17 ALCLAD AL.ALLOY PLATES, SPEC. 2014/2014 A-T6 /WP/T651, CLADDING 1050 A /1070 /19500/19700/6003 ON BOTH SIDES AS PER GR 24345-WP AL.CLAD, IS 736/AL.CLAD 2014 ,ASTM B209/ D.T.D 5040 A/HAL STD 1250 TH. thickness 12 MM, MIN. SIZE 1000X1000MM, TOLERANCES AS PER ANSI H35.2/ HAL STD. 1250. 18 ALCLAD AL.ALLOY PLATES, SPEC. 2014/2014 A-T6 /WP/T651, CLADDING 1050 A /1070 /19500/19700/6003 ON BOTH SIDES AS PER GR 24345-WP AL.CLAD, IS 736/AL.CLAD 2014 ,ASTM B209/ D.T.D 5040 A/HAL STD 1250, TH. thickness 14 MM, MIN. SIZE 1000X2000MM, TOLERANCES AS PER ANSI H35.2/ HAL STD. 1250. 19 ALCLAD AL.ALLOY PLATES, SPEC. 2014/2014 A-T6 /WP/T651, CLADDING 1050 A /1070 /19500/19700/6003 ON BOTH SIDES AS PER GR 24345-WP AL.CLAD, IS 736/AL.CLAD 2014 ,ASTM B209/ D.T.D 5040 A/HAL STD 1250, TH. thickness 20 MM, MIN. SIZE 1000X1500MM, TOLERANCES AS PER ANSI H35.2/ HAL STD. 1250. 20 ALCLAD AL.ALLOY PLATES, SPEC. 2014/2014 A-T6 /WP/T651, CLADDING 1050 A /1070 /19500/19700/6003 ON BOTH SIDES AS PER GR 24345-WP AL.CLAD, IS 736/AL.CLAD 2014 ,ASTM B209/ D.T.D 5040 A/HAL STD 1250 TH. thickness 22.5 MM, MIN. SIZE 3 feet X 6 feet .,TOLERANCES AS PER ANSI H35.2/ HAL STD. 1250. 21 ALCLAD AL.ALLOY PLATES, SPEC. 2014/2014 A-T6 /WP/T651, CLADDING 1050 A /1070 /19500/19700/6003 ON BOTH SIDES AS PER GR 24345-WP AL.CLAD, IS 736/AL.CLAD 2014 ,ASTM B209/ D.T.D 5040 A/HAL STD 1250, TH. thickness 28.5 MM, MIN. SIZE 1000X1000MM, TOLERANCES AS PER ANSI H35.2/ HAL STD. 1250. 22 ALCLAD AL.ALLOY PLATES, SPEC. 2014/2014 A-T6 /WP/T651, CLADDING 1050 A /1070 /19500/19700/6003 ON BOTH SIDES AS PER GR 24345-WP AL.CLAD, IS 736/AL.CLAD 2014 ,ASTM B209/ D.T.D 5040 A/HAL STD 1250, TH. thickness 30 MM, MIN. SIZE 1000X1000MM, TOLERANCES AS PER ANSI H35.2/ HAL STD. 1250. 23 ALCLAD AL.ALLOY PLATES, SPEC. 2014/2014 A-T6 /WP/T651, CLADDING 1050 A /1070 /19500/19700/6003 ON BOTH SIDES AS PER GR 24345-WP AL.CLAD, IS 736/AL.CLAD 2014 ,ASTM B209/ D.T.D 5040 A/HAL STD 1250, TH. thickness 19.05 MM, MIN. SIZE 1250 X 2500 MM, TOLERANCES AS PER ANSI H35.2/ HAL STD.1250. 24 ALCLAD AL.ALLOY PLATES, SPEC. 2014/2014 A-T6 /WP/T651, CLADDING 1050 A /1070 /19500/19700/6003 ON BOTH SIDES AS PER GR 24345-WP AL.CLAD, IS 736/AL.CLAD 2014 ,ASTM B209/ D.T.D 5040 A/HAL STD 1250, TH. thickness 32.25 MM, MIN. SIZE 1000X1000MM, TOLERANCES AS PER ANSI H35.2/ HAL STD. 1250. 25 ALCLAD AL.ALLOY PLATES, SPEC. 2014/2014 A-T6 /WP/T651, CLADDING 1050 A /1070 /19500/19700/6003 ON BOTH SIDES AS PER GR 24345-WP AL.CLAD, IS 736/AL.CLAD 2014 ,ASTM B209/ D.T.D 5040 A/HAL STD 1250, TH. thickness 25.4 MM, MIN. SIZE 1000X2000MM, TOLERANCES AS PER ANSI H35.2/ HAL STD. 1250. 26 ALCLAD AL.ALLOY PLATES, SPEC. 2014/2014 A-T6 /WP/T651, CLADDING 1050 A /1070 /19500/19700/6003 ON BOTH SIDES AS PER GR 24345-WP AL.CLAD, IS 736/AL.CLAD 2014 ,ASTM B209/ D.T.D 5040 A/HAL STD 1250, TH. thickness 12.7 MM, MIN. SIZE 1000X2000MM, TOLERANCES AS PER ANSI H35.2/ HAL STD. 1250. 27 ALCLAD AL.ALLOY PLATES, SPEC. 2014/2014 A-T6 /WP/T651, CLADDING 1050 A /1070 /19500/19700/6003 ON BOTH SIDES AS PER GR 24345-WP AL.CLAD, IS 736/AL.CLAD 2014 ,ASTM B209/ D.T.D 5040 A/HAL STD 1250, TH. thickness 16 MM, MIN. SIZE 1000X1000MM, TOLERANCES AS PER ANSI H35.2/ HAL STD. 1250. 28 ALCLAD AL.ALLOY PLATES, SPEC. 2014/2014 A-T6 /WP/T651, CLADDING 1050 A /1070 /19500/19700/6003 ON BOTH SIDES AS PER GR 24345-WP AL.CLAD, IS 736/AL.CLAD 2014 ,ASTM B209/ D.T.D 5040 A/HAL STD 1250, TH. thickness 50 MM, MIN. SIZE 1000X1000MM, TOLERANCES AS PER ANSI H35.2/ HAL STD.1250. 29 ALCLAD AL.ALLOY PLATES, SPEC. 2014/2014 A-T6 /WP/T651, CLADDING 1050 A /1070 /19500/19700/6003 ON BOTH SIDES AS PER GR 24345-WP AL.CLAD, IS 736/AL.CLAD 2014 ,ASTM B209/ D.T.D 5040 A/HAL STD 1250, TH. thickness 60 MM, MIN. SIZE 1000X1000MM, TOLERANCES AS PER ANSI H35.2/ HAL STD.1250. 30 ALCLAD AL.ALLOY PLATES, SPEC. 2014/2014 A-T6 /WP/T651, CLADDING 1050 A /1070 /19500/19700/6003 ON BOTH SIDES AS PER GR 24345-WP AL.CLAD, IS 736/AL.CLAD 2014 ,ASTM B209/ D.T.D 5040 A/HAL STD 1250, TH. thickness 65 MM, MIN. SIZE 1000X1000MM, TOLERANCES AS PER ANSI H35.2/ HAL STD.1250. 31 ALCLAD AL.ALLOY PLATES, SPEC. 2014/2014 A-T6 /WP/T651, CLADDING 1050 A /1070 /19500/19700/6003 ON BOTH SIDES AS PER GR 24345-WP AL.CLAD, IS 736/AL.CLAD 2014 ,ASTM B209/ D.T.D 5040 A/HAL STD 1250, TH. thickness 35 MM, MIN. SIZE 1000X1000MM, TOLERANCES AS PER ANSI H35.2/ HAL STD.1250. 32 ALCLAD AL.ALLOY PLATES, SPEC. 2014/2014 A-T6 /WP/T651, CLADDING 1050 A /1070 /19500/19700/6003 ON BOTH SIDES AS PER GR 24345-WP AL.CLAD, IS 736/AL.CLAD 2014 ,ASTM B209/ D.T.D 5040 A/HAL STD 1250, TH. thickness 38.1 MM, MIN. SIZE 1000X1000MM, TOLERANCES AS PER ANSI H35.2/ HAL STD.1250. 33 ALCLAD AL.ALLOY SHEETS, SPEC. 2014/2014 A-T6 /WP, CLADDING 1050 A /1070/19500/19700/6003 ON BOTH SIDES AS PER BS L165/BS L167 / EN 4400-2/EN 2087/GR 24345-WP AL.CLAD, IS 3436/AL.CLAD 2014,ASTM B209/AMS 4029 CLAD/HAL STD 1250, TH. thickness 1.0 MM, MIN. SIZE 1000X2000MM, TOLERANCES AS PER ANSI H35.2/ HAL STD.1250. IT SHOULD BE PROTECTED WITH TRANSPARENT PVC COATING MORETHAN 50 micro ON BOTH SIDES. 34 ALCLAD AL.ALLOY SHEETS, SPEC. 2014/2014 A-T6 /WP, CLADDING 1050 A /1070/19500/19700/6003 ON BOTH SIDES AS PER BS L165/BS L167 / EN 4400-2/EN 2087/GR 24345-WP AL.CLAD, IS 3436/AL.CLAD 2014,ASTM B209/AMS 4029 CLAD/HAL STD 1250, TH. thickness 2.0 MM, MIN. SIZE 1000X1000MM, TOLERANCES AS PER ANSI H35.2/ HAL STD.1250. IT SHOULD BE PROTECTED WITH TRANSPARENT PVC COATING MORETHAN 50 micro ON BOTH SIDES. 35 ALCLAD AL.ALLOY SHEETS, SPEC. 2014/2014 A-T6 /WP, CLADDING 1050 A /1070/19500/19700/6003 ON BOTH SIDES AS PER BS L165/BS L167 / EN 4400-2/EN 2087/GR 24345-WP AL.CLAD, IS 3436/AL.CLAD 2014,ASTM B209/AMS 4029 CLAD/HAL STD 1250, TH. thickness 2.5 MM, MIN. SIZE 1000X2000MM, TOLERANCES AS PER ANSI H35.2/ HAL STD.1250. IT SHOULD BE PROTECTED WITH TRANSPARENT PVC COATING MORETHAN 50 micro ON BOTH SIDES. 36 ALCLAD AL.ALLOY SHEETS, SPEC. 2014/2014 A-T6 /WP, CLADDING 1050 A /1070/19500/19700/6003 ON BOTH SIDES AS PER BS L165/BS L167 / EN 4400-2/EN 2087/GR 24345-WP AL.CLAD, IS 3436/AL.CLAD 2014,ASTM B209/AMS 4029 CLAD/HAL STD 1250, TH. thickness 3.0 MM, MIN. SIZE 1000X1000MM, TOLERANCES AS PER ANSI H35.2/ HAL STD.1250. IT SHOULD BE PROTECTED WITH TRANSPARENT PVC COATING MORETHAN 50 micro ON BOTH SIDES. 37 ALCLAD AL.ALLOY SHEETS, SPEC. 2014/2014 A-T6 /WP, CLADDING 1050 A /1070/19500/19700/6003 ON BOTH SIDES AS PER BS L165/BS L167 / EN 4400-2/EN 2087/GR 24345-WP AL.CLAD, IS 3436/AL.CLAD 2014,ASTM B209/AMS 4029 CLAD/HAL STD 1250, TH. thickness 5.0 MM, MIN. SIZE 1000X1000MM, TOLERANCES AS PER ANSI H35.2/ HAL STD.1250. IT SHOULD BE PROTECTED WITH TRANSPARENT PVC COATING MORETHAN 50 micro ON BOTH SIDES. 38 ALCLAD AL.ALLOY PLATES, SPEC. 2014/2014 A-T6 /WP/T651, CLADDING 1050 A /1070 /19500/19700/6003 ON BOTH SIDES AS PER GR 24345-WP AL.CLAD, IS 736/AL.CLAD 2014 ,ASTM B209/ D.T.D 5040 A/HAL STD 1250, TH. thickness 6.0 MM, MIN. SIZE 1000X2000MM, TOLERANCES AS PER ANSI H35.2/ HAL STD.1250. 39 ALCLAD AL.ALLOY PLATES, SPEC. 2014/2014 A-T6 /WP/T651, CLADDING 1050 A /1070 /19500/19700/6003 ON BOTH SIDES AS PER GR 24345-WP AL.CLAD, IS 736/AL.CLAD 2014 ,ASTM B209/ D.T.D 5040 A/HAL STD 1250, TH. thickness 8.0 MM, MIN. SIZE 1000X1000MM, TOLERANCES AS PER ANSI H35.2/ HAL STD.1250. 40 ALCLAD AL.ALLOY PLATES, SPEC. 2014/2014 A-T6 /WP/T651, CLADDING 1050 A /1070 /19500/19700/6003 ON BOTH SIDES AS PER GR 24345-WP AL.CLAD, IS 736/AL.CLAD 2014 ,ASTM B209/ D.T.D 5040 A/HAL STD 1250, TH. thickness 18.0 MM, MIN. SIZE 1000X1000MM, TOLERANCES AS PER ANSI H35.2/ HAL STD.1250. 41 AL. ALLOY PLATE thickness 15.87MM, TEMPER T651 SPECIFICATION (6061,QQ-A-250/11) / (6061,ASTMB209) /(AMS4027) / ( IS 65032(HP20),IS736)/(6061-BSH20,EN 485-2/EN 573-3)/(ENAW6061, EN573-3/EN 485-2)/(UNI9006/2,EN573-3/EN 485-2) /(DIN ALMG1SICU 3,3211,EN573-3/EN 485-2) SIZE thickness 5/8 inch (15.875MM) X 4 feet X 6 feet 42 AL.ALLOY PLATE, TEMPER T651 SPECIFICATION (6061,QQ-A-250/11)/(6061,ASTMB209)/(AMS4027)/ (IS 65032(HP20),IS736)/(6061-BSH20,EN 485-2/EN 573-3)/(ENAW6061, EN573-3/EN 485-2)/(UNI9006/2,EN573-3/EN 485-2) /(DIN ALMG1SICU 3,3211,EN573-3/EN 485-2/) SIZE thickness 3/4 inch (19.05) MM X4 feet (1200 MM) X 6 feet (1800 MM) 43 AL. ALLOY PLATE TEMPER T651 SPECIFICATION (6061,QQ-A-250/11)/(6061,ASTMB209)/(AMS4027)/ (IS 65032(HP20),IS736)/(6061-BSH20,EN 573-3/EN 485-2)/(ENAW6061, EN573-3/EN 485-2)/(UNI9006/2,EN573-3/EN 485-2) /(DIN ALMG1SICU 3,3211,EN573-3 EN 485-2/) SIZE 7/8(22.225MM)X4 feet X6 feet 44 AL ALLOY PLATE THICKNESS 10 MM, TEMPER T6,SPEC 6061,QQ-A-250/11/6061,ASTMB209/AMS4027/ IS 65032(HP20),IS736/6061,BSH20/ENAW6061, EN573-3/UNI9006/2,EN573-3 /DIN ALMG1SICU 3,3211,EN573-3, SIZE 10 X 1000 X 1000 MM 45 MATERIAL ALUMINIUM ALLOY PLATE, CONDITION T6/T651, SPECIFICATION ENAW 6061, EN 485-2, SIZE thickness 6 MM X 1000 X 1000 MM. 46 AL ALLOY PLATE THICKNESS 38.1 MM, TEMPER -T651,SPEC (6061,QQ-A-250/11)/(6061,ASTMB209)/(AMS4027)/( IS 65032(HP20),IS736)/(6061-BSH20,EN 573-3/EN 485-2)/(ENAW6061, EN573-3/EN 485-2)/(UNI9006/2,EN573-3/EN 485-2) /(DIN ALMG1SICU 3,3211,EN573-3/EN 485-2) SIZE 38.1 X 1000 X 1000 MM 47 ALUMINIUM ALLOY PLATE, CONDITION T651, SPECIFICATION 6061-T651 PER QQ-A-250/11, SIZE thickness 16 MM X1000 X 1000 MM. 48 ALUMINIUM ALLOY PLATE, CONDITION T651, SPECIFICATION 6061-T651 PER QQ-A-250/11, SIZE thickness 18 MM X1000 X 1000 MM. 49 AL.ALLOY SHEET THICKNESS 2 MM, TEMPER T6, SPEC (6061,QQ-A-250/11)/(ENAW6061,EN573-3 /EN 485-2)/(IS GRADE -65032(HS20),IS737)/(6061-BSH20,EN 573-3/EN 485-2)/(AMS4027)/(6061,ASTMB209)/( DIN ALMG1SICU 3.3211,EN573-3/EN 485-2) /(UNI9006/2,EN573-3/EN 485-2) SIZE 2 X 1000 X 1000 MM WITH PVC COATING ON BOTH SIDES 50 AL.ALLOY SHEET THICKNESS 1.6 MM, CONDITION T6,SPEC 6061,QQ-A-250/11 OR QQ-A-327 SIZE 1.6 X 1000 X 1000 MM WITH PVC COATING ON BOTH SIDES 51 ALUMINIUM ALLOY PLATE, CONDITION T651, SPECIFICATION 6061-T651 PER QQ-A-250/11, SIZE thickness 31.75 MM X1000 X 1000 MM. 52 AL. ALLOY SHEET, TEMPER T6 SPECIFICATION (6061,QQ-A-250/11)/6061,ASTMB209)/(AMS4027)/(IS 65032(HP20),IS736)/(6061-BSH20,EN 573-3/EN 485-2)/(ENAW6061, EN573-3/EN 485-2)/(UNI9006/2,EN573-3/EN 485-2) /(DIN ALMG1SICU 3,3211,EN573-3/EN 485-2) SIZE thickness 6 X 1000 X 1000 MM 53 ALUMINIUM ALLOY PLATE, CONDITION T651, SPECIFICATION 6061-T651 PER QQ-A-250/11 OR QQ-A-327, SIZE thickness 72 (TOLERANCE +3 MM), MINIMUM LENGTH AND WIDTH 1000 X 1000 MM. 54 AL. ROUND CON TO HAL STD 1251WP OR IS 733-75, GR. (HE-15) 24345 OR BS 1476, L64, L87,L168,L65-T6 OR QQA 351 GR. 17S OR ENAW 573-3-2014 DIA 7MM X2 TO 3 MTRS 55 AL ALLOY ROUND COND T4, SPEC ASTM B316 GRADE AA2117, DIA 5 MM X 2 TO 3 MTRS IN LENGTH 56 AL ALLOY ROUND COND T4, SPEC ASTM B316 GRADE AA2117, DIA 6 MM X 2 TO 3 MTRS IN LENGTH 57 AL ALLOY ROUND COND T4, SPEC ASTM B316 GRADE AA2117, DIA 8 MM X 2 TO 3 MTRS IN LENGTH 58 ALUMINIUM ROLLED BARE SHEETS CONFORMING TO HAL STD 1253 (1/2 HARD), EN 485-2 EUROPEA STANDARD, 5251-H24, SIZE thickness 1.6MM X 1000MM X 1000MM, WITH PVC COATING ON BOTH SIDES OF SHEET. 59 ALUMINIUM ALLOY SHEET CONFORMING TO HAL STD 1253, CONDITION 1/2H, IS GR 52000 (NS4), IS 737 / NS4, BS 1470 / ENAW 5251, EN 573/485, SIZE thickness 2 MM plus or minus 0.1MM X 1000 X 2000 MM, WITH PVC COATING ON BOTH SIDES. 60 ALUMINIUM ALLOY PLATE CONFORMING TO HAL STD 1259 WP, IS 736-64430(HP-30)WP OR EN 6082-T6 OR L115-T6, SIZE thickness 12 MM X1000 X1000 MM. 61 AL ALLOY PLATES CONFORM BS 1470/L-115 6082-T-651, IS 736-64430(HP-30) thickness 25X1000X2000MM. 62 AL.ALLOY SHEET 6061-T6- thickness 0.062 inch X48 inch X144 inch . 63 ONE SIDE/TWO SIDES POLISHED(RA 0.2 micro M) NON-FADING BLACK ELECTRO COLOURED ANODIZED ( AS PER MIL-A-8625, TYPE II, CLASS 2 ) SHEET ALUMINIUM SPECIFICATION HAL-1255 CONDITION 3/4 HARD OR IS737-19000-H6 SIZE thickness 0.5 MM X 300MM X 300MM 64 SUPER ENAMELLED COPPER WIRE CONFORMING TO. HAL STD 6053, IS 4800, PART -V, GUAGE 27 SWG SIZE DIA 0.42 MM IN SPOOLS. 65 ALUMINIUM ALLOY PLATE, CONDITION T651, SPECIFICATION 6061-T651 PER QQ-A-250/11, SIZE thickness (2.5IN) 63.5 MM X1000 X 1000 MM Total Quantity : 27438
