}

Tender For Work Contract For Major And Minor Bus Body Joband Fchfc Work Dindigul Region, dindigul-Tamil Nadu

Government Departments has published Tender For Work Contract For Major And Minor Bus Body Joband Fchfc Work Dindigul Region. Submission Date for this Tender is 31-07-2024. Vehicle Accessories and Component Tenders in dindigul Tamil Nadu. Bidders can get complete Tender details and download the document.




Tender Notice

44097959
Tender For Work Contract For Major And Minor Bus Body Joband Fchfc Work Dindigul Region
Open Tender
Indian
Tamil Nadu
Dindigul
31-07-2024

Tender Details

Work Contract for Major and Minor Bus body Joband FCHFC work Dindigul Region; 1 Work Contract forMajor andMinor Bus body Joband FCHFCwork 2 Fabrication of Front Structure 3 Fabrication of Left (or) Right side Structure 4 Fitting of Front Structure 5 Fitting of Left (or) Right side Structure 6 Fab of Rear Structure 7 Fittting of Rear Structure 8 Repair work of Rear Structure work & Body Sheet work 9 Fab., of Front Cowl Assly., 10 Fittingof Front Cowl Assly., 11 Fab., & Fitting of Front Right side Cowl 12 Fab., & Fitting of Front Left side Cowl 13 Fab., & Fitting of Front Centre Grill 14 Fab., & Fitting of Front Bumber 15 Repair work for Right(or) LeftCowl (or) Center grill (or) Frt. Bumber 16 Repair work forFront Bumber 17 Fab., & Fitting of Rear Bumber 18 Repair work forRear Bumber 19 Fab & Fix of Cross bar channel (100 x 50 x 6 mm M.S ) Fitting of Canvas belt,U Clamp. 20 Fab., & Fitting of Front (or) Rear Glass Frame Assly., 21 Fab., & Fitting of Front (or) RearTop Doom (Top, Left, and Right side) 22 Fab., & Fitting ofRear Top Doom (Top, Left, and Right side) 23 Fab., & Fitting of Wheel arch Angle 24 Repair& Fitting of Wheel arch Beading 25 Fab., & Fitting of Front (or) Rear Foot Board {Angle)Structure, Plywood (3 Step), GI sheet, Beading} 26 Fab., & Fitting of Front (or) Rear Foot Board Plywood (1 Step plywood , G.I Sheet,Beading) 27 Fab., & Fitting of Front (or) Rear Foot Board (GI sheet (Left (or)Right side, Beading} 28 Fab., & Fittingfor Right (or) Left(or) Topone Arch to Another Arch Angle Damage Removed andArch, Rails Reeper ,Body sheet and Beading work. 29 Repair work for Right (or) Left Body sheet one Arch to another Arch Damage Removed and Reeper, Body sheet and Beading work. 30 Repair work for Right (or) Left Body sheet one Arch to another Arch DamageBody sheet and Beading work. 31 Removal and Fitting for Top Outer Center GI Sheet, Plywood, Reeper. Full work. (Removal & Fitting of Luggage carriar, Ladder, Speder) 32 Removal and Fitting for Top Outer Center GI Sheet, Plywood, Reeper.Full work. 33 Removal of Left (or) Right Side Water Chennel, Beading, Top OuterShoulder Sheet, Reeper, and Fitting of Reeper, Shoulder sheet, Beading and Water Chennel Full work. 34 Repair work for Left (or) Right Side Water Chennel, Beading, Top Outer Shoulder Sheet, Reeper, and Fitting of Reeper, Shoulder sheet, Beading and Water Chennel Full work. (3 x 4 ) 35 Fixing of Plasfal Roll. (Full work) 36 Repair work of Plasfal Roll. (4 x 4 )(Including GI Sheet_ 37 Repair work for Top Luggage carrier work 38 Repair work for Top Ladder work 39 Repair work for Top Spader work 40 Fab., & Fitting of Left (or) Right side Quarter glass frame work 41 Fitting of Front (or)Rear single Glass 42 Cutting & Fixing of Left (or) Right side Quarter Glass. 43 Cutting & Fixing of Left side Driver Vision Glass. 44 Cutting & Fixing of Rear Route Board Glass 45 Cutting & Fixing of See Through Glass 46 Removal & Fixing of Railway type window frame assly., 47 Removal & Fixing of Railway type window frame assly.,(Including Rem.& Fix Guardrail Pipe) 48 Repair work of Railway type window frame assly., 49 Repair work for one Arch & Rails Angle 50 Fixing of one Glass for Railway type window frame -Top (or) Bottom 51 Changed of window frame Stopper (or) Handle work 52 Changed for velvatte channel of window framework 53 Fab., & Fitting of Gaurd rail Pipe. (Inculding Clip) 54 Repair work for Gaurd rail Pipe, Left (or) Right side 55 Fab., & Fitting of (IGR )Hand rails Pipe. (IGR Clip) (2 Line) 56 Repair work for(IGR )Hand rails Pipe. 57 Fab., & Fitting ofVertical (Center) Post . 58 Fab., & Fitting ofSeater Pipe(Seat Grap railPipe ) (Single,Double & Three) 59 Fab., & Fitting ofHandrestPipe . 60 Repair work for Wheel Arch Beading 61 Fab., & Fitting of Rear Tail lamp Cover assly., 62 Removal & Fixing of Inner Celling Full work 3mm Sunglass ( Removal and Fitting of IGR Line, Beading, Vetrical post,FB Partition Pipe,Hatrackand Electrical Fitting) 63 Repair work for Inner Celling 3mm Sunglass ( 4 x 4 ) 64 Removal & Fixing of Left (or) Right Inner Shoulder Sheet and Beading work 65 Repair work forLeft (or) Right Inner Shoulder Sheet (or) Inner Carnar sheet and Beading work ( 4 x 3 ) 66 Repair work for Rear Route Board Door & Left and Right Closing Sheet 67 Repair work for Driver Partition. 68 Removal & Fab.,Fixing of Dash board Full Plywood, Angle, Flat, Beading 69 Repair work for Dash board Full Plywood, Angle, Flat, Beading 70 Repair work for Dash boardPlywood, Beading 71 Repair work for ABC Shield, 72 Repair work for Driver Cabin Flooring(Structure, MS Sheet ) 73 Repair work for Bannet Structure Bendremoval(including Bannet) 74 Fab., Fitting for Post cover (or) Wiring channel 75 Repair work & Fittingfor Post cover (or) Wirring channel 76 Removal & Fiiting for Inside Waist level Bottom mica(8 x3 ) 77 Repair work for Flooring Structure(Angle) Plywood ( 4 x 4) 78 Repair work for Flooring Structure(Angle) Plywood ( 8 x 4) (including flooring flat and center post Removing and fitting) 79 Repair work for FlooringPlywood ( 4 x 4) 80 Fab.,&Fitting for Box Murgaurd Angle,Flat,Plywood & Beading work 81 Repair work for Box Murgaurd Angle,Flat,Plywood & Beading work 82 Repair work for Box Murgaurd Plywood & Beading work 83 Removal & Fitting for one Seat frame (Single, Two & three) 84 Repair workfor one Single seat Seat frame 85 Repair workfor one Two seaterSeat frame 86 Repair workfor one Three seaterSeat frame 87 Removal & Fitting work for single (or) Two (or) Three seat Cushion (or) Single Backrest . 88 Fab.,&Fitting forone Single seat Seat frame (With support brkt) 89 Fab.,&Fitting forone Two seaterSeat frame (With support brkt) 90 Fab.,&Fitting forone Three seaterSeat frame (With support brkt) 91 Fab.,&Fitting forSingle backrest Mica (or) Plywood work 92 Removal & Fitting for All Seat Frame (moff (or) City ) 93 Fab., forSingle(or) Two (or) Three seat Cushion Plywood work(With Bracket) 94 Fab., & Fitting for Front (or) Rear Footboard door(Half door) 95 Repair work & Fitting for Front (or) Rear Footboard door 96 Repair work & Fitting for Emergencydoor 97 Fab., & Fitting for Driver door work 98 Repair work& Fitting for Driver door 99 Repairfor Battery box door 100 Fab., & Fitting for SLF Inspection doorwork(SLF) 101 Repair work for SLF Inspection door(SLF) 102 Repair work forAir Cleaner door 103 Repair work forDiesel Tank Door 104 Fab., & Fiiting for Hanging Murdguard - 2Nos 105 Fab., & Fitting for Route board box (Front(or) Rear) 106 Repair workfor Route board box (Front(or) Rear) 107 Fab., & Fitting for Tools box 108 Fab., & Fitting for First Aid box 109 Fab., & Fitting for Switch box (including fixing of switches) 110 Repair work &Fitting for Tools box 111 Fitting for Handle ( Dr.Door(or) Foot board (or) Grill handle(or) Side Mirror) 112 Fab., & Fitting for Tial lamp Mesh cover 113 Fitting for Driver door Lock with Handle 114 Repair work for Hatrack & Bracket 115 Fab., and Fitting for Advertisement Board 116 Repair and Fitting for Advertisement Board 117 3x3 Gajette Pieces Cutting Work for 8x4x10G MS Sheet 118 5x5 Gajette Pieces Cutting Work for 8x4x10G MS Sheet 119 18x3 Backrest FlatCutting Work for 8x4x10G MS Sheet 120 Buffing for 1 Alu. Beading -12 Feet 121 Buffing for 2 Alu. Beading -12 Feet 122 Buffing for 2-1/4 Alu. Beading -(Footstep) 12 Feet 123 Fabrication for Driver can Seat(or) Backrest (Pipe & MS Rod) 124 Canningfor Driver can Seat& Backrest 125 Canningfor Driver can Seat & Backrest with Plastic wire 126 Fab of Front Structure 127 Fab of Left (or) Right side Structure 128 Fitting of Front Structure 129 Fitting of FrontLeft (or) Right side Structure 130 Fab., of Front Cowl Assly (including Bumber) 131 Fittingof Front Cowl Assly., 132 Fab., & Fitting of Front Right side Cowl 133 Fab., & Fitting of Front Left side Cowl 134 Fab., & Fitting of Front Centre Grill (with out for Hydroulic door) 135 Fab., & Fitting of Front CentreHydroulic door 136 Fab., & Fitting of Front Bumber 137 Repair work for Right(or) LeftCowl (or) Center grill (or) Frt. Bumber (With Paste & Painting) 138 Fab., & Fitting of FrontGlass Frame 139 Fab., & Fitting of FrontTop Doom (Top, Left, and Right side) 140 Fab of Rear Structure 141 Fitting of Rear Structure 142 Repair work of Rear Structure work & Body Sheet work 143 FabricationOf Rear Cowl for G.I Sheet (including Tial lamp box,Bumer)) 144 Fitting work for RearCowl 145 Fab., & Fitting of Rear Bumber 146 Repair work for Rear Bumber 147 Repair work for Rear Tial lamp box Left (or) Right 148 Fab., & Fitting ofRear Glass Frame 149 Fab., & Fitting ofRear Top Doom (Top, Left, and Right side) 150 Repair work forRear Top Doom (Top, Left, and Right side) 151 Fab., & Fitting of Wheel arch Angle(Sq.Tube) 152 Repair work forWheel arch Angle(Sq.Tube) 153 Repair& Fitting of Wheel arch Beading 154 Retight for Body ChassisU Clamp, 155 Retight for Seat frame, IGR Line & Vertical Post 156 Repair work for Battery box door (or) Tools box door (or) Luggage box Door 157 Battery box Alteration work 158 Fab., & Fitting of Front (or) Rear Foot Board (Sq.Tube)Structure (3 Step), GI sheet, Beading 159 Fab., & Fitting of Front (or) Rear Foot Board(1 Step G.I.Sheet , Beading) 160 Fab., & Fitting of Front (or) Rear Foot Board {GI sheet (Left (or)Right side, Beading} 161 Fab., & Fitting for Front (or) Rear Footboard Folding door (Including Glass Fixing ) 162 Repair work & Fitting for Front (or) Rear Footboard Folding door ) 163 Removing& Fitting for Front (or) Rear Footboard Folding door Glass (Pasting) 164 Fab., & Fittingfor Right (or) Left(or)one Arch to another Arch Sq.Tube Damage Removed andArch, Rails,Body sheet and Beading work. 165 Fab., & Fittingfor Top one Arch to another Arch Hat section & Sq.Tube Damage Removed andArch, Rails,Body sheet and Beading work. 166 Repair work for Right (or) Left (Top) Body sheet one Arch to another Arch- Removed andFitting forBody sheet and Beading work. 167 Removal and Pastingfor Left (or) Right Side Water Chennel- 12 168 Fab., Fitting ofRoute board box (Front(or) Rear) 169 Repair workfor Route board box (Front(or) Rear) 170 Fitting of Frontsingle Glass(Rubber Fitting )(BSIV) 171 Fitting of Frontsingle Glass (Pasting) (BSIV) 172 Fitting of Rear single Glass (Rubber Fitting )(BSIV) 173 Fitting ofRear single Glass (Pasting )(BSIV) 174 Cutting & Fixing of Left (or) Right side Quarter Glass.(Rubber) (BSIV) 175 Cutting & Fixing of Left (or) Right side Quarter Glass.(Pasting ) (BSIV) 176 Cutting & Fixing of Left side Driver Vision Glass. 177 Removing & Fixing of See Through Glass (Pasting) (BSIV) 178 Removal & Fixing of Sliding Type window frame assly.,(Rem. & Fit Guardrail Pipe) 179 Removal & Fixing of Sliding Type window frame assly., 180 Repair work of Sliding glass Frame assly.,(Velvatte Channel & Glass) 181 Fixing for FRP MatTOP Side Full (3 Layer) 182 Repair workfor FRP Mat Fixing work 183 Fixing ofFRP Mat workfor Box Murdguard (2 layer) 184 Fabrication and fitting for Emergency door (With out Window frame) 185 Fabrication and fitting for Engine Bannet (BSIII & BSIV) 186 Removing and Pasting for Window Glass for A/C Bus ( City OR Moff) 187 Fitting of Foot step partition Glass incl.Partition pipe work 188 Fitting of Driver partition Glass incl.Partition pipe work 189 Removal of Front Structure assy. 190 Removal of Rear Structure assy. 191 Removal of Front Cowl assy.. 192 Removal of Rails Angle 193 Removal of Cross Bar channel for 12 Nos 194 Removal ofCross Piece Angle & Flat 195 Removal ofWheel Arch foe 1Veh 196 Removal ofFull Arch for 13 Nos 197 Removal ofCabin AngleDoom Flat, Front & RearCeiing Flat 198 Removal of Stress Pannel & Battery box Angle 199 Removal of Rear Foot step Angle & Foot board Patition 200 Removal ofFront & Rear Top Doom Flat 201 Removal of Wood Reeper Top,Left ,Right & Rear 202 Removal of Plotform Plywood for 1 Veh. 203 Removal of Inner Ceiling Plywood 204 Removal of Seat Cushion Plywood 205 Removal of Seat Cushion & Backrest For 1 Veh. 206 Removal of Waist Level Bottom Sunglass 207 Removal of Body Sheet Front ,Left,Right& Rear 208 Removal of Hatrack assy. 209 Removal of Front Cowl assy.( Left-4,Right,-4) 210 Removal of Dashboard Angle& Pedal shield. 211 Removal of Inside Post Cover 212 Removal of Front & Rear Top Doom-Inner & Outer Sheet 213 Removal of Inner Shoulder sheet 214 Removal of Outer Shoulder sheet 215 Removal of Driver Door Frame Assy. 216 Removal of Z-Channel Shoulder sheet & Tees sheet 217 Removal of 3 Seater Seat Frame assy. 218 Removal of 2 Seater Seat Frame assy. 219 Removal of 1 Seater Seat Frame assy. 220 Removal of Seat Frame assy.& Center Post, Hand rails for 1 Veh 221 Removal of Lackage Carrier,Ladder & Spader 222 Removal of Driver Partition 223 Removal of Guard rails Pipe for 1 Veh 224 Removal of Railway Type Window Frame assy. For 1 No. 225 SLF Vehicle Front Glass Shacked, Removal of Front glass frame 226 SLF Vehicle Fab., & Fixing of Front Glass frame & Glass fixing 227 SLF Vehicle Front Side Doom,Top Doom Structure Removal work 228 SLF Vehicle Front Side Doom Sheet, Top dooom sheetPasting & Quarter glass frame Fabrication & GlassFixing work 229 SLF VehicleFront Side doom & Top doom Structure work 230 SLF Vehicle Left side Inner & Outer Shoulder sheet removal work 231 SLF Vehicle Left side Inner & Outer Shoulder sheetrepair work & Fixing work 232 SLF Vehicle Left side Square section pipe removal work 233 SLF Vehicle Left side Square section pipe Fab., & Fixingwork 234 SLF Vehicle Left side Inner Post cover removal & re fixing work 235 SLF Vehicle Left side foot board partition repair work 236 SLF Vehicle Left side Rails square section Repair work 237 SLF Vehicle Left side Body sheet & Beading work 238 SLF Vehicle Left side Railway window glass frame assy. Guard rail pipe removal to attend repair work & Fixing work 239 SLF Vehicle Right side Inner & Outer Shoulder sheet removal work 240 SLF Vehicle Rightside Inner & Outer Shoulder sheetrepair work & Fixing work 241 SLF Vehicle Right side Square section pipe removal work 242 SLF Vehicle Right side Square section Pipe Fab., & Fixingwork 243 SLF Vehicle Right side Inner Post cover removal & re fixing work 244 SLF Vehicle Right side Rails square section Repair work 245 SLF Vehicle Right side Body sheet & Beading work 246 SLF VehicleRight side Railway window glass frame assy. Guard rail pipe removal to attend repair work & Fixing work 247 SLF VehicleRemoval of Front Door to Altration Louvers, Sliding Angles Fab., Fixing Louvers Guide rod and Louvers Fixing work 248 SLF Vehicle Seat frame assy. Twisted.Removal to attend repair work for 1 No. 249 SLF Vehicle Baloon door work for 1 No. 250 SLF Vehicle Rear Glass Shacked, Removal of Rear glass frame 251 SLF Vehicle Fab., & Fixing of Rear Glass frame & Glass fixing 252 SLF Vehicle Rear Side Doom,Top Doom Structure Removal work 253 SLF Vehicle Rear Side doom & Top doom Structure work 254 SLF Bucket Seat -Removal & Fitting- Cushion & Backrest- Stabler(or)Pasting 255 PAINTING ( FC and HFC) 256 CITY / SLF CITY- Enamel Painting work.(Inner,Outer,Flooring & Under chassis) 257 MOFF -Enamel Painting work (Inner,Outer,Flooring & Under chassis) 258 CITY / SLF CITY -PU Painting work (Inner,Outer,Flooring & Under chassis) 259 MOFF-PUPainting work (Inner,Outer,Flooring & Under chassis) 260 CITY Body Inside& Flooring work 261 MOFFBody Inside& Flooring work 262 CITY Body Outside Painting work 263 MOFF Body Outside Painting work 264 CITY / MOFF Under Chassis Painting work 265 Accident body, Repair body - EnamelPaint- Front cowlfull -(Including Tinker tack and Putty work )CITY/ SLF CITY/ MOFF 266 Accident body, Repair body - EnamelPaintCITY/ SLF CITY/ MOFF 267 Accident body, Repair body - P.UPaint- Front cowlfull -(Including Putty work ) CITY/ SLF CITY/ MOFF 268 Accident body, Repair body - P.UPaint-Rear cowlfull -(Including Putty work )CITY/ SLF CITY/ MOFF 269 Accident body, Repair body - P.U PaintCITY/ SLF CITY/ MOFF (SQ FT) 270 Sticker WorkFixing of Front Glass Sticker for (TAMILNADU ARASU POKKUVARATHU KALAGAMMADURAI) 271 Removing & Fixing of Front Glass Sticker for (TAMILNADU ARASU POKKUVARATHU KALAGAMMADURAI) 272 Fixing of Front Glass Sticker for(TAMILNADU ARASU POKKUVARATHU KALAGAMMADURAI) (Front Glass Bottom inside-BSIV) 273 Removing & Fixing of Front Glass Sticker for(TAMILNADU ARASU POKKUVARATHU KALAGAMMADURAI)(Front Glass Bottom inside -BSIV) 274 Removing & Fixing of Rear Glass Sticker for ( USE PUBLIC TRANSPORT) 275 Fixing of Inside & Out sideStickers for FC Stickers, Front ,RearGlass & Lt,RT Side body Route stickers ,Front & Rear Reflector stickers Regn. No. Sticker , Region code stickers 276 Fixing ofRegn. No. Sticker , Region Code Stickers 277 FC FULL PAINTING WORK FOR A/C BUS CITY 278 FC FULL PAINTING WORK FOR A/C BUS MOFF 279 FC FULL PAINTING WORK FOR WATER LORRY/LORRY/ L BOARD BUS 280 CITY CONVERSIONBODY WORK 281 Removal Hatrack & Luggage carrier & Ladders Speder 282 C/c.,Seat frame assly., 3 seater Alter., 2 seater work 283 Removal & Fab., & Fitting Battery Box assly., 284 Removal & Alter., & Fitting of Centre Post & Handrails 285 Fixing of Plashfal work 286 City conversion Liner work Old model (Full) 287 C/c., Seat cushion 3 seater - Alter., 2 seater work 288 Old vehicles Back Rest & Seat cushion Removal & Fix., after Stritching work 289 Full Painting (Actual 88 Mhx15=1320.00 ) 290 City Convertion (Including Painting ) and Chassis Bend Work 291 RemovalT.V. Box & Deck Box with closing Sunglass 292 Platform Repair work (2-Plywood Removal & Fixing ) 293 Repair of Banet work 294 City conversion Old Veh., Electrical work 295 Tail lamp Net Fab., & Fixing for one vehicle 296 Removal Mof seat frame & Fixing of City seat frame 297 Front & Rear Foot Board 700mm Alter., 900mm ( Foot Board Partition,Foot Board Body sheet, Foot Board Plywood, Beading ) 298 Chassis Bend Removal Left(or) Right for 3 Feet 299 Chassis Crack work (With inside box) (2Feet) 300 ChassisHood Removal from Bus 301 Chassis Hood Fitted for Bus 302 Electrical and Mechanical work 303 Dashboard wiringwork (including Switch box) (Without alternator) 304 Repairwiring work(includingACC,MBJ , FC & HFC) (Including With altternator & Starter Fiiting . Battery removel & Fiiting ) 305 HFC/FC REMOVAL OF MAIN AXLE FROM THE VEHICLE AND CLEANING AND FITTING OF RC MAIN AXLE( Including Removing and Fitting for Spring Shackle &Purch) 306 HFC/FC REMOVAL OF FRONT AND REAR SPRING ASSEMBLY 4 NOS AND CLEANING AND FITTING OF RC SPRING ASSY 307 LINER WORK ( FABRICATION & FITTING ) 308 Removal of single Cushion seat and striching and Fitting work. 309 Removal of Two seaterCushion seat and striching and Fitting work. 310 Removal of three Cushion seat and striching and Fitting work. 311 Removal of Single seat headrest backrestand striching and Fitting work. 312 Removal of Single seat headrest Coverand striching and Fitting work. 313 Removal of Ord.single Backrest and striching and Fitting work. 314 Removal of Ord.Two seaterBackrest and striching and Fitting work. 315 Removal of Ord.Three seaterBackrest and striching and Fitting work. 316 Removal of Ord. Louvers and Fab., Striching and Fitting ( Including Chips work ,Guide rod and closing sheet) 317 Removal of Tape type ( Driver). Louvers and Fab., Striching and Fitting ( Including Chips work ,Guide rod and closing sheet) 318 Removal of Foot board Louvers and Fab., Striching and Fitting ( Including Chips work ,Guide rod and closing sheet) 319 Striching ofFab.ofsingle seat Cushion Cover 320 Striching of Fab., ofTwo seaterseat Cushion cover 321 Striching of Fab., ofthree seater Cushion Cover 322 Striching of Fab.ofSingle seat headrest backrest cover 323 Striching of Fab., ofSingle seat headrest Cover 324 Striching of Fab., ofOrd.single Backrest cover 325 Striching of Fab.,of Ord.Two seaterBackrest cover 326 Striching of Fab.,of Ord.Three seaterBackrest cover 327 Striching of Fab., of Ord. Louvers ( Including Chips and hole work ) 328 Striching of Fab.,of Tape type ( Driver). Louvers ( Including Chips work ,Guide rodhole) 329 Striching of Fab., of Foot board Louvers( Including Chips,Guide rod hole ) 330 Striching of Fab., ofHatrack Cover 331 Leyland BSIV Removal of single Cushion seat and striching and Fitting work. 332 Leyland BSIVRemoval of Two seaterCushion seat and striching and Fitting work. 333 Leyland BSIV Removal of three seater Cushion seat and striching and Fitting work. 334 Leyland BSIVRemoval of Single seat headrest backrestand striching and Fitting work. 335 Leyland BSIVRemoval of Single seat headrest Coverand striching and Fitting work. 336 Leyland BSIVRemoval of Hatrack (inside) cover and Pasting and Fitting work 337 Leyland BSIVStriching ofFab.ofsingle seat Cushion Cover 338 Leyland BSIVStriching of Fab., ofTwo seaterseat Cushion cover 339 Leyland BSIVStriching of Fab., ofthree seater Cushion Cover 340 Leyland BSIVStriching of Fab.ofSingle seat headrest backrest cover 341 Leyland BSIVStriching of Fab., ofSingle seat headrest Cover 342 Leyland BSIVStriching of Fab., ofHatrackcover

Key Value

Document Fees
Refer document
EMD
INR 1000.0 /-
Tender Value
Refer document
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail