Tender For Providing Machineries Shed At Resource Recovery Park In Ettimadai Town Panchayat; 1 Earthwork excavation in all classes of soils such as hard stiff clay, stiff black cotton, hard red earth, shales, murram,ordinary earth, with initial lead and lifts etc.,for foundation SS 20 B 2 Cement concrete 1:4:8 (one cement, four sand and eight aggregate) using 40mm ISS metal including cost conveyance of all materials and alllabour charges etc 3 Supply, collection and filling of Gravel from approved quarry including all cost and conveyance to site, stacking them on road side to departmental gauge for the take premeasurement. Each layer not more than 15cm thick and consolidation properly etc complete. TNDSS No : 301 & 305 4 Plain Cement Concrete 1:3:6 Mix (One part of cement, three part of sand and six part of aggrigate) using20 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing. Laying and curing etc. complete. Complying with standard. specifications.. TNDSS NO: 24 5 Reinforced Cement Concrete 1:1½:3 Mix (One part of cement, one and half part of sand and three part of aggregate)using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing but excluding cost of reinforcement etc.Complete with standard Specifications. TNDSS NO: 30 6 Brickwork in CM 1:5 (One Cement, Five Sand)using best quality of country bricks of size 8 3/4 X 4 1/4 X 2 3/4 for sub structures including cost and conveyance and Labour Charges etc., Complete as per the standard specifications 7 Plain Cement Concrete 1:2:4 Mix (One part of cement, two part of sand and four part of aggrigate) using20 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing. Laying and curing etc. complete. Complying with standard. specifications.. TNDSS NO: 24 8 Supplying and errecting centering to sides and soffits including supports and struttingfor drainage sides andculvert body wall sidesusing 90cm x 60cm and B.G 10stifenedwith welded mild steel angles of size 25mm x 25mm x 3mm for boardinglaid over( silver oak joists ) of size 10cm x 6.50cm spaced at about 90cm including all labour charges and cost and conveyance of all materials to site etc. complete complying with standard specification. TNDSS NO: 30&86 9 Supplying fabricating and placing in position of steel rods using TMT or Ribbed Tor Steel including cost of binding wire, cost of labour charges for fabrication and placing in positionetc. Complete. Complying with standard. specifications.TNDSS NO: 86 10 Plastering in Cement Mortor 1:5 Mix (one Cement, five sand) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with standard specifications.TNDSS No: 56, 57 11 Providing Granolithic pattern floor finish with Plain Cement concrete 1 : 2 : 4 mix using 10-12mm ISSHBG metal and the top rubed smooth etc., complete complying with standard specification as directed. i.)25mm thick. forofficebuildings, Bus stand, Shopping complex and School buildings. 12 Supplying andfixingofpush and pull type Rolling shutter confirming to IS 6248/1979 and as amended from time to time. With ISI make of approved size and section using 18 gauge G.I.sheet.The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of Hood covers , transportation charges etc., and as directed by Engineer incharge. 13 Supply, fabricating & fixing in position of M.S window outer frame will be 25 x 25 x 3mm angle, the side frame with outer bars and M.S Sheets 1.60mm thick 20gauge MS sheet with necessary hinges, tower bolt, aldrop length 30mm and hold fast etc., complete complying with standard specifications. 14 Painting new plastered surface with two coats of ready mixed Exterior emulsion paint water based primer ( Liquid ) two coat over one coat of primer with best weather proof exterior emulsion paint approved color quality including preparation of surface and finishing neatly etc., complete complying with standard spefication and as directed by the departmental officers (S.L. No 59 A ) 15 Supplying and fixing of M.S. L ANGLES ofapproved design fortruss using necessary mild steel flats for inner and outermembers which should be fixed totruss inclusive of priming coat of best approved quality red oxide primer etc., complete complying with standard specifications. 16 Supply, and fixing of Galvalum sheet ( pre painted )6mm thick including 15 cm lapping necessary J bolt and nut ,bitumen washer and screws if wooden baterns including cost and conveyance of all materials and labour charges etc complete complying with standard specifications 17 Reinforced Cement Concrete 1:1½:3 Mix (One part cement, one and half part m.sand and three part of aggregate)using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing but excluding cost of reinforcement etc.Complete with std.Specifications. TNDSS NO: 30 V, VI (S3), VII-3. 18 All figures quoted should be inclusive of GST Charge
