}

Tender For Various Works, hyderabad-Telangana

Greater Hyderabad Municipal Corporation has published Tender For Various Works. Submission Date for this Tender is 10-07-2024. Cutting Crimping and Punching Tools Tenders in hyderabad Telangana. Bidders can get complete Tender details and download the document.




Tender Notice

44017019
Tender For Various Works
Open Tender
Indian
Telangana
Hyderabad
10-07-2024

Tender Details

Tender For Various Works-1. Manual Operated Passenger Lift, Capacity: 4Persons (Or) 380Kgs, Speed: 0.5 Mets/Sec, Drive: Vvv3f, Travel: 42 Feet Approximate, No. Of Floors To Be Served: G+3 (4Stops), No. Of Landing Entrances: 4(Four) In Front Side Only, No. Of Car Entrance: 1 (One) In Front Side Only, Position Of Machinery: Machine Room, Size Of Lift Well: 1360Mm Wide X 1500Mm Deep, Lift Car Inside Size: 1050Mm Wide X 1200Mm Deep, Type Or Design Of Car: S.S.Cabin (304), Car Fitting: Indirect Fluorescent Light & Fan, Type Of Landing Entrance Protection: Manual Operated M.S Collapsible Gate, Type Of Car Entrance 100 Protection: Manual Operated M.S Collapsible Gate, Clear Opening Or Doors / Gates: 910Mm Width X 2000Mm Height, Type Of Control System: Microprocessor, Electric Supply: 440 Volts/3Ph/50 Cycles, Flooring: Pvc Antiskid Flooring/Granite By Client, False Ceiling: S.S Standard, Special Inclusions: Ard (Automatic Rescue Device), Universal Bracket System, Ss Landing Door Frames, Shaft 2 Core And 3 Core Cable System, Lop And Cop Wall Mounted, Fan, Osg(Over Speed Governor), Emergency Alarm & Light 2. Stainless Steel Hand Wash Sink Wall Mounted:30 Feets, Sheet 1.2 Guage 3. Supply And Installation Of Merry-Go-Round Seater With Fibre Seats Including All Charges Etc Complete 4. Supply And Installation Slide With Ladder Gl 12 Feet: The Slide Made With Gl Sheet And Arranged Between 2Nos Angles 40X40x5mm And Rivited Both Sides Of Sheet, And Ms Flat 25X3 Mm Welded On The Rivets, And 30Mm Dia Ms Pipe Welded On The Edges Of The Both Angles, Top End Of The Slide. One Platform Arranged Made It Gl Sheet Welded To Ms Angle Frame Made With 35X35x5mm, Back Side One Ladder Fitted Made With 30Mm Dia Pipe And Steps Made With 25Mm Dia Pipe. One Coat Red-Oxide, Two Coats Of 3 Colors Enamel Paint Including All Charges Etc Complete 5. Supply And Installation Of Sea-Saw 4 Seater: 2Nos Seats Made With Wooden 1.00 Plank 25Mm Thick And Fitted Both Ends Of 50Mm O.D, Pipe 2Mm Length Of 7 With Bolts & Nuts And Both Fitted On Horizontal Pipe 7 Length And 60Mm O.D, 3Mm U Shape (Rivers) With Clamps, One Coat Red-Oxide And Enammel Paint Only. One Coat Red-Oxide, Two Coats Of 3 Colors Enammel Paint 6.Supply And Installation Of Circular Swing Made 5 Dia 2No. 5 Ring 11/4 Pipe 1.00 Opp: Two Seats Fiber Sheet, Horizontal Pipe 60 Od 61/2 Length 4No 480D Pipes And Swing Type Clamps Fitting. One Coat Red-Oxide, Two Coats Of 3 Colors Enamel Paint Including All Charges Etc Complete

Key Value

Document Fees
Refer document
EMD
Refer document
Tender Value
Refer document
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail