|
| 1 | Analytical Weighing box.1 mg to 200 gm (Class F1), material of weight brass, pre calibrated, material of pack wooden box, finished surface, ISO certified, calibration certificates.Make: Reputed Make |
| 2 | Hot Plate with Magnetic StirrerMagnetic Stirrers with hot plate with stainless steel hot plate.Heat energy is controlled by energy regulator.SALIENT FEATURESPMDC motor for higher torque even at low speedsBetter speed regulation even with small volume and low speedsAccurate stepless speed control maintains excellent speed stability. Digital Speed Indicator for displaying of stirring speedTotally enclosed unit Designed for use even in corrosive atmosphereTechnical SpecsStirring Capacity: 2 LtrHeating Capacity: 300 WattsStirring Paddle (PTFE Coated): 13 dia x 50 mmMake : Remi /JESBO/G-Biosciences |
| 3 | All Quartz Double Distillation UnitWith demountable boiler, Vertical Type, AutomaticOutput:1.5 litres/hrCooling Water Requirements:1 litres/minDistillation Temperature: 65-75°CDistillate quality: Pyrogen freeVoltage: 230-250v,50/60Hz.Conductivity (s/cm) =<1x10-6Power: 3 KW Heater. Heater: Quartz Boiler: QuartzCondenser: QuartzWith auto power cut-offMake :Borosil/Reviera/Duran/Corning |
| 4 | Digital Thermo Hygrometer with Sensor ProbeTechnical Specification:Temperature range: -50 degree C to +70 degree CTemperature accuracy: +- 1.0 Degree CHumidity measurement range: 10% RH to 99% RHHumidity Accuracy: +- 5%Humidity Resolution: +-1%Temp Resolution 0.1 Degree CMake : HTC/GE/Thermo/Equinox |
| 5 | Safety Shower• Unit Description: Separate safety shower and eyewash or combined modular unit.Design temperature and Pressure: Considering the ambient effect of the region.• Service Fluid: Normally Potable Water• Compatible Piping Specification: Normally SS pipe• Design Standard: ISEA / ANSI Z358.1• End connections: Mostly flanged• Connected pipe size: Normally 2 inch• Drain Outlet connection: Normally 2 inchDevice Material: Mostly Stainless SteelMake: Reputed Make |
| 6 | Hot Air OvenDouble walled chamber:- size 18”x18”x18”With inner chamber made:- SS 304Outer chamber of G.I powder coated with 65mm insulation of glass wool.Temperature range 5 degree C above ambient to 300 ⁰C with 3 side heaters.Safety alarm, 220V, 750 W, 50 Hz single phase.Temperature Controlled: - Microprocessor based PID controllerTemperature accuracy of 1.0 degree CNumber of shelves: 2 Nos of SS shelves and with air circulating fan for uniformtemperature.Door Closer with Locking arrangements.Make: Ambassador/Patsio/Tempo/G-Biosciences |
| 7 | Water Bath :Nominal Capacity, 12 LiterTemperature range 5 to 99 degree C,Temperature accuracy +- 0.2 degree CAC 230-240V, 50HzEpoxy/powder coated stainless steel outer chamber,SS304, with 4 number hole/concentric ring.Power requirement, 550W,PID based digital temperature controller,Over temp alarm and cut off, With seamless stainless-steel pan, inbuilt waterlevel sensor, and non-corrosive ringMake: Borosil/Tarson/Grant instrument/G-Biosciences |
| 8 | Mono pan Analytical Digital Balance0.1mg to 220gm with Auto Calibration facility.Capacity: 220 gm.Readability: -Min.: 0.0001 gm (0.1mg), Max: 220 gm or betterRepeatability: -+/- 0.0001gmLinearity: - +/- 0.0002gmPan size: - 90 mm Ф (Stainless Steel 316 grade) round edgeCalibration: -Fully automatic, External adjustment with CAL DONE indicationDisplay: -High Contrast Enlarged Advanced Eye Protected Backlit LCD DisplayKey Feature: -Auto Self checking function, anti vibration feature and autofiltration for matching environment conditionsTechnology: -Based on Electromagnetic Force Compensation (EMFC) advancedMicrocontrollerOverload Protection: - Yes ,150% of full scale (up to 350g)Interface: RS232, USB, 1500V,Extra Protection: Protection of Main Balance Configuration, Airtight Rust & Dust proof weighing chamber (IP54)Tare range: 100% FullResponse time: 3 sec.Draft shield: Yes, with 3 opening door – left, right and top smooth glass sliderOperating temp: + 5°C to + 40°CWeighing Units: gm, mg, ct, kg, tola, lb, gn, oz, ozt, dwt, etc (20 standard global weighing unit)Power Requirement:-Input- AC110~230V, 50/60 Hz, +/- 15% Output – DC 7~8VSensitivity drift: +/- 1ppm/°CHousing: Inside high grade chemical resistant metal and outside high grade anti static absApproved:ISO, CE, NABL, Legal Metrology (Gov. of India)Standard Accessories: AC-DC Adapter, SS Calibration weight, SS pan, SS dustcover ring, Operating Manual, below weighing hook, Draft shieldMake : ACZET /RADWAG /SHMAZDU. |
| 9 | Autoclave VerticalDouble walled, 450mm diaX 600mm height, 98 litreExterior wall and Lid SS304 (mirror finish),Sealing : neoprene rubberInterior wall SS304, with Silicon gasketWorking pressure: 15-20 psi, but tested up-to 40 psi (ASME)Accuracy +3psiWorking temperature: 121-125 Degree CAuto set Controller to: 15 psi &121 Degree CPressure Gauge display, with timer and stainless-steel basket220 v, 50 Hz, 4KW,Heating : ISI Marked Immersion Heater.With Low water level indicator, Automatic pressure switch, steam release Vales,water outlet vales, safety valves, power cable, end cycle buzzer.Make: Tempo/Patsio/NSW/G-Biosciences |
| 10 | UV- Laminar Air Flow CabinetVERTICAL free standing bench top, Working table Size: 3x2x2 feet, made of Stainless-Steel Sheet (SS-304 grade).Exterior surfaces epoxy painted, Side panels & front doors 6 mm thick acrylic transparent plexi glass.ULPA filter, with pre-filter fitted Filter efficiency 99.99%, 0.12 micron and larger, fluorescent lighting 20w,UV germicidal lamp, AC 220v, 50 HZ,static pressure manometer, air velocity 4-4.5m/s,noise level less than 65 db, with UV Hour meter, LED display for velocity,Time and lamp on /off, cock for gas and air.Make: ESCO/Airtec/Tempo/G-Biosciences |
| 11 | Benchtop Multipara Conductivity meter with facility to measure Conductivity/TDS/Salinity/Resistivity/Temp with inbuilt ATC.Features Single channel multi-parameter for IDS sensors for measurement of pH/Cond/TDS/DO/Temp, Digital sensor recognition, Memory for 4500 records,black and white graphic display with CMC, QSC and channel indicator Digital sensor recognitionScope of Supply Professional digital multiparameter benchtop meter for IDS sensors, for measurements / documentation according GLP/AQA. With Single channel input for pH/mV, dissolved oxygen and conductivity. Single instrument with universalpower supply, stand and operation manual, software and USB cable. with IDS sensors: digital IDS cond. cell, 0.01 mol/l KCl, cond standard.Technical SpecificationMeasurement channels: 1 Universal ChannelCalibration Point: For pH- 1–5, DO- 1, Conductivity- 1, Turbidity- 3, Calibration memory: Max 10Calibration timer: 1 – 999 daysMemory: Manual: 500 data sets, Automatic: 4500 data setsInterface: Mini USB-BDisplay: black and white graphic displayPower supply: universal power supply, 230/240VACMeasuring Range: Conductivity: 0.0uS … 2000 mS/cm, additionally 0.00uS …19.99 μS/cm, K = 0.1 cm–1, TDS: 0.0mg … 1999 mg/l, 0.0mg - 199.9 g/lSalinity: 0.0 … 70.0 (acc. IOT), Sp. Resistivity: 0.00 … 20 MΩ cmCell constants: AutomaticAccuracy (± 1 digit): ± 0.5 %Temperature: – 5.0 … 105.0 °CAuto Read: Automatic, manualTemperature compensation: AutomaticIDS Conductivity prob specification.Type: four electrode, graphiteConductivity range: 10uS -2000 mS/cm +-0.5% of valueSpecific resistance:0.5 ohm cm – 100k ohm cm +- 0.5% of valueSalinity: 0.0 -70.0 +- 0.5% of valueTDS: 0-1999 mg/l, 0.0-199.9g/l +_ 0.5% of valueTemperature: 0-100 degree C +-0.2 degree CCell constant: 0.475/cm +-1.5 % of valueShaft material: epoxy, L 120mm, dia 15 mmMake : WTW/Merck/Hach. |
| 12 | Ion Meter with pH and ISE (Fluoride) probe, stirrer probe with paddle and ATC Probe.Instrument Specification: pH Range: -2.000 to19.999,Resolution :0.1.0.01,0.001,Relative Accuracy: +0.002,Calibration Points: 1 to 6Auto Buffer RecognitionISE Range: 0 to 19999Resolution: 1,2 or 3 significant digitsRelative Accuracy: +0.2 Mv OR 0.05% whichever is greaterUnits: ppm, ppb, M, % or unitlessTechnique Options: Single known addition and subtractionDouble known addition and subtractionCalibration Points: 2 to 6Calibration Options: Liner, point to point, non-linear selectable auto bank mV/ RelmV//ORP Range: +1999.9 Resolution: 0.1Relative Accuracy: +0.2 Mv OR 0.05% whichever is greaterEH Calibration Capability: YesTemperature: Range: -5 to 105 Resolution: 0.1 0CRelative Accuracy: +0.1 0C With Swing Arm electrode standRS 232 Cable Universal Power adapter Compatible Stirrer probe with paddle. pH Probe specification: With epoxy body and flat surface, pH Range: 0-14,pH accuracy 0.01,temperature range:0-100 degree C,internal reference ROSS, water proof Banana Connector, probe length120mm dia 12 mm,ATC Probe: Automatic Temperature Control Probe with stainless steel body, to use with standard pH meter, Accuracy +- 2 degree C.Operating temperature 0-100 degree C. Material type stainless steel, Length 120mm, dia 6mm, Connector type: MiniDINFluoride Probe Specification For Use with ISE Meter.Type Combination Ion Selective Electrode. Measuring range: 0.02 – saturated Temperature range: 0-80 degree C continuous, 0-100 degC intermittent. Length 110mm dia 13mmWith water proof banana connector.Make : Orion(Thermo fisher)/WTW/Merck. |
| 13 | Portable Turbidity Meter with USBRange:0 – 1000 NTU, Accuracy: ± 2 % of reading plus stray lightMax. operating humidity: 90 %Operating temperature range: 0 - 50 °CPower Requirements:100 - 240 VAC, 50/60 HzStorage temperature range: - 40 °C to 60 °CStray Light:< 0.02 NTUReading modes: Normal (Push to Read)Display Type: Graphic LCDBattery : AA AlkalineLight source: Tungsten filament lampCertifications/compliance: CE certifiedData logging:500 records, Calibration: automatic 3 points Repeatability:± 1 % of reading or 0.01 NTU , whichever is greater, Response time:6 sec in normal reading mode Enclosure Rating: IP67 Measurement method: Ratio turbidimetric determination using a primary nephelometric light scatter signal (90°) and transmitted light scatter signal. Measurement Modes: Normal (Push to Read), Signal Averaging, Rapidly Settling Turbidity Round Sample Cell. C0ase assembly, AA alkaline batteries, sample cells, Ampule kit, silicone oil, oiling cloth, user manual with USB and Power module.Make : Hach/Merck/Aqualobo |
| 14 | Membrane filtration Assembly for micro-biological analysis: (manifold three place/funnels), each part separatable, autoclavable complete.electrically operated vacuum pump max pressure delivered 700mBar, noise level low as 60 decibel ISO 8199, suction flask, filtration head 02 and silicon tubing, 100 ml 150 No funnels (re-usable and Autoclavable) and 150 No 0.45 um 47mm gridded filter. With stainless steel forceps (sets)Make: Merck Millipore, PALL or SIGMA |
| 15 | Bacteriological incubator, SS304, insulated door and fitted with heavy hinges and should have double glass window 5ᵒC above ambient to 60 ᵒC, accuracy +-0.5 ᵒC degree centigrade, led display, with capacity of 100-200litre, Micro-processor based PID controller, with removable shelves, 220v 50 hz, safety alarm, auto power break off etcMake: Tempo/G-biosciences/Ambassador/PWS/REMI |
| 16 | UV/VIS Spectrophotometer. Split beam/double beam, xenon flash light source/ Deuterium Lamp, Tungsten Halogen Lamp, min 190nm and max 1100 nm wavelength, automatic stray light and baseline correction. Measurement, method, Transmittance, Absorbance, Concentration (Wavelength, time), 230 V ± 10, 50 HzMake: Merck Millipore/Aglient/ Perkin Elmer |
| 17 | Refrigerator: Single door (glass) upright general-purpose laboratory refrigerator, with temperature range 0 to 8 degree Celsius, capacity above 340 liters, For storage of culture media & sample.Make: NORCOOL/Equivalent. |
