Tender For Pr-28035614_Rio Panel_Infra Haz 28035614 0001 0001 300907147 SYS,OT,RIOPANEL Technical Details Name : Paresh Joshi Contact : Email : PARESH.JOSHI@AMNS.IN 1,600,000 VAL SYSTEM,ONE TIME DETAILS:RIO PANEL , DETAILS-1:WITH ALL ACCESSORIES AMNS REF. NO(WBS):C-22-UPSTR-INFRA-SDI1 Item Details : 1. Supply of RIO panel, IP 42 protection installed with following automation hardwares 1nos. 2. Digital Input Module, Isolated 32 DI, 24 VDC, (Siemens 6ES7321-1BL00-0AA0)6nos. 3. Digital Output Module, Isolated 16 DO, 24 V DC, 0.5A, (Siemens 6ES7322-1BH01-0AA0)3nos. 4. Analog Input Module, Isolated 8 AI, resolution 13 bits, (Siemens 6ES7331-1KF01-0AB0)4nos. 5. Analog Output Module, Isolated 8 AO, diagnostics, resolution 11/12 bits, (Siemens 6ES7332-5HF00-0AB0)2nos. 6. nterface Module, SIMATIC DP, (Siemens 6ES7153-1AA03-0XB0) 2 set 7 Relay boards, Power supply, modules, Third party interface modules, SMPS, Local isolators, Terminal blocks <(>&<)> other necessary automation <(>&<)> Panel utility hardwares. Qty 1 lot 8 Communication cables (profibus <(>&<)> ethernet) including connectors <(>&<)> installation accessories etc., for interfacing with existing automation system QTY 1 lot 9. IO modules shall be compatible for interface with CPU Siemens Make and Model No. 416-2XN05-0AB0 <(>&<)> CP Modue 443-1EX20-0XE0 Scope of Work Installation supervision, Modification of existing HMI, Logic to include new equipment/conveyors. Integration of new RIO panel with existing automation system, Integration with MCC, power distribution, energy meters, numerical rel ays and third-party system interface. Commissioning of automation system including field instrument, process equipment’s and third-party interfaces with automation system, FAT and SAT for the new automation panel. Bidder to visit the site before submission of bid to understand their scope of works, Any item which is not included in the scope of work but need to be required for the completeness of the project shall be included by the bidder. Prepration of IO allocation sheet and drawing shall be in vendor scope and as per approval with AMNS. Vendor has to submitting drawings and preparing the IO allocation sheet will be approve by AMNS As-built drawings must be prepared or corrected for submission in accordance with AMNS requirements. In case of any failures or defects, the vendor must provide new items at their own cost with service support on immidiate basis Please also specify the wa
