Tender For Forest Area Road Construction Work 2000154163 10 10 10 EXCAVATION, REMOVING & SHIFTING 150 M3 20 SURFACE PREPARATION 900 M2 30 SUPPLY & FILLING OF MOORUM SOIL 1 M3 40 DIGGING & EXCAVATION & HUME PIPE INSTLN 50 M3 50 PROVIDING & LAYING PCC M15 GRADE 10 M3 60 SUPPLY OF READY MIX CONCRETE-M20 20 M3 70 SUPPLY AND INST. OF RCC CHAMBER & COVER 6 NO 80 SUPPLY OF RCC HUME PIPE 30 M 90 CONST OF GRANULAR SUB BASE(GSB) 530 M3 100 P & L 200 MM T WATER MIX MACADAM (WMM) 165 M3 110 PROVIDING LAYING OF BITUMAN TACK COAT 9,000 M2 120 P & A HOT BITUMINOUS PRIMER COAT 4,500 M2 130 S&P 1COAT APPRV HOT BITUMEN1.5 KG/SQ M 4,500 M2 140 P & L THICK DENCE BITUMINOUS MACADAM (DB 4,500 M2 150 P & L 25 MM BITUMINOUS CONCRETE (BC) 4,500 M2 160 PROV & APPLYING THERMOPLASTIC PAINT 180 M2 170 BACKFILLING AND LEVELLING 1,080 M3 Email : mahavir.chavan@amns.in Contact : Name : Mahavir Chavan Item Details : FACTORY TO MAIN HIGHWAY ROAD CONSTRUCTION WORK. SCOPE OF WORK: DEVELOPMENT/IMPROVEMENT OF EXISTING MAIN APPROCH ROAD DESIGN DETAILING SERVICES TOTAL LENGTH OF ROAD IS APPROX 600 MTR. AND 7.0 MTR. CARRIES WAY.DESIGNING OF HEAVY DUTIES BT ROAD FROM AATA MILL GATE TO APPL CORNER. WORK DETAILS AS PER PR SERVICE LINE ITEM DETAILS.( ALL WORKING AS PER BELOW DETAILS ) Section -I (Earthwork) 1} SERVICE ITEM NO 01:- Excavation <(>&<)> shifting for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts in scope of vendor Good quality murum keeping one area to filling in side shoulders if required otherwise shift outside anywhere in scope of vendor. 2) SERVICE ITEM NO 02:- Surface leveling, watering <(>&<)> compaction with cutting <(>&<)> filling more <(>&<)> less 50 to 70 mm, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard proctor density in all scope of vendor. 3} SERVICE ITEM NO 03 :- Providing <(>&<)> laying good quality murum work in embankment with approved materials obtained from other sources for all leads including all lifts, laying in layers of 20cm to 30cm thickness breaking clods, dressing to the required lines, curves, grades <(>&<)> section, watering, and compaction with vibratory roller with V-Sat attachment to achieve not less than 97 % of standard proctor density etc. complete. (Material obtained from other sources) Section-II (Storm Water Drain <(>&<)> Footpath and Cross pipe Ducts):- 4}SERVICE ITEM NO 4 :- Excavation for laying rcc pipe as per drawing including excavated material shifting and surface leveling work in scope of vendor. 5}SERVICE ITEM NO 5 :- PCC 100 MM THCIK Below RCC pipe use M-15 Grade concrete for pcc material and Laboure’s all in scope of vendor. 6}SERVICE ITEM NO 6 :- RCC Pipe cashing including proper shuttering and use M-20 Grade concrete for cashing pipe as per drawing. 7} SERVICE ITEM NO 7 :- Providing and Construction RCC chember (M20) with PCC (M15) including steel <(>&<)> supplying <(>&<)> fixing composite Resin Manhole Strom water drain gully gratings cover <(>&<)> frame Size of 900mm x 600mm load bearing capacity (C600) 60 MT (Inspection shall be as per guidelines of EN 124:2004 Required replacement warranty for 24 months Including loading, unlo ading, transportation, all other taxes Excluding GST etc. Complete as directed by Engineer In charge Marking Required. Manufacturing Guidelines EN-124 Page 2 of 3 ArcelorMittal Nippon Steel India Limited AM/NS PRECOATED PUNE Works:Gat No -740,Sanaswadi,,Nagar Road, Pune,412208,Maharashtra,India GSTIN 27AAACE1741P1ZH PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000115892 Date 01.07.2024 Submission Date 11.07.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Mr. Nand Kumar Jha Contact 9158895882 Email Nandkumar.Jha@amns.in MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Services for line Item Quantity UOM Technical Details Other Details Load Bearing capacity C-250 Name or id Mark of Manufacturer Year of Manufacturing For SWD Chamber AS PER SHOULD BE DRAWING CHAMBER. 8} SERVICE ITEM NO 8:- (a) Providing ISI standard RCC pipe in standard length of NP-II/III class and required dia as per IS 458:1988, suitable for rubber ring joint including testing/inspection charges, cost of rubber ring, transport and site unloading etc. complete. (b) Lowering, laying and jointing in proper grade and alignment of RCC pipes with joints in CM 1:1 proportion etc all as per IS 783-1985 <(>&<)> rubber ring as provided and curing etc. complete. A} For Service Crossings 450mm NP2 9} SERVICE ITEM NO 9 :- Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader / Paver on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- Plant Mix Method and Grading - II Materia. 10} SERVICE ITEM NO 10 :- Wet Mix Macadam - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. Laying By Grader/Paver. as directed etc. complete after compaction thickness should be 150 mm . Spec. No. M.O.R.T.<(>&<)> H.2013. Cl. 406. P.No.131. 11} SERVICE ITEM NO 11 :- Providing and applying tack coat on the prepared surface heating by fames in Boiler and spraying bitumen set footed in bitumen boiler on B.T. surface 2.5 kg/10 sqm. (VG-30 bulk bitumen rates are considered to arrive at rates). 12} SERVICE ITEM NO 12 :- Prime coat - Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including cleaning of road surface and spraying, primer at the rate of 0.60 kg/sqm using mechanical means. 13} SERVICE ITEM NO 13 :- BITUMINOUS MACADAM:--Providing and laying bituminous macadam using crushed aggregate of Grading 1,premixed with bituminous binder, t ransported at site with VTS, laid over a previously prepared surface, finished to the required grade ,level, alignment, and rolling to achieve the desired density for 80/100 mm compacted thickness with drum mix type hot mix plant with SCADA having complying essential features of batch mix plant as per IRC-27 2009 specified conditions and attachments such as electronic load sensor based belt conveyers, automatic synchronization of bitumen and aggregate Fedder, built in dust controller system and PLC for batch Mix plant, Sensor paver and Vibratory roller excluding prime/Tack coat etc. complete - Bitumen 4% of specified grade (VG-30 bulk bitumen rates are considered to arrive at rates) after compaction thickness should be 60 mm . 14} SERVICE ITEM NO 14 :- DENSE BITUMINOUS MACADAM:--Providing and laying dense bituminous macadam using crushed aggregate of grading 1,premixed with bituminous binder Bitumen of specified grade,@ 4.50 % by weight of total mix and filler, transported at site with VTS, laid over a previously prepared surface , Page 3 of 3 ArcelorMittal Nippon Steel India Limited AM/NS PRECOATED PUNE Works:Gat No -740,Sanaswadi,,Nagar Road, Pune,412208,Maharashtra,India GSTIN 27AAACE1741P1ZH PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000115892 Date 01.07.2024 Submission Date 11.07.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Mr. Nand Kumar Jha Contact 9158895882 Email Nandkumar.Jha@amns.in MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Services for line Item Quantity UOM Technical Details Other Details finished to the required grade ,level, alignment, and rolling to achieve the desired density for 76/100 mm compacted thickness with drum mix type hot mix plant with SCADA having complying essential features of Hot mix plant as per IRC-27- 2009 specified conditions and attachments such as electronic load sensor based belt conveyers, automatic synchronization of bitumen and aggregate Fedder, built in dust controller system and PLC for Drum Mix plant , Sensor paver, and Vibratory roller excluding prime/Tack coat etc. complete. -Bitumen VG-30 grade with stone dust filler (VG- 30 bulk bitumen rates are considered to arrive at rates) after compaction thickness should be 50 mm 15} SERVICE ITEM NO 15 :- BITUMINOUS CONCRETE: --Providing and laying bituminous concrete using crushed aggregate of grading-1,premixed with bituminous binder @ 5.40% by weight of total mix and filler, transported at site with VTS, laid over a previously prepared surface, finished to the required grade, level, alignment and rolling to achieve the desired density for 50mm compacted thickness with drum mix plant with SCADA, Sensor paver and Vibratory roller excluding prime/Tack coat etc. Complete. -Bitumen of specified grade with stone dust filler. (VG- 30 bulk bitumen rates are considered to arrive at rates) after compaction thickness should be 30 mm 16} SERVICE ITEM NO 16 :- Road Marking with Hot Applied Thermoplastic Compound with Reflectorizing Glass Beads on Bituminous /Concrete Surface- Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorizing glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes complete. 75 MM WIDTH BOTHSIDE OF ROAD EDGE Morth specification No. 803.4. 17} SERVICE ITEM NO 17 :- Available murum filling both sides of road shoulder with proper leveling, sloping, watering and compaction all in scope of vendor. NOTE : ALL BILLING QUANTITY WILL BE CERTIFY AS PER MEASURMENT BASIS.
