Tender For Dnit For Summer Preparedness Under The Section - 1 Of Sde Public Health Engineering Sub Adampur Division Adampur Hisar (Under Phe Division No. 1 Hisar, adampur-Haryana

Dnit For Summer Preparedness Under The Section - 1 Of Sde Public Health Engineering Sub Adampur Division Adampur Hisar (Under Phe Division No. 1 Hisar [2.B2024] B2024. Water supply tanker of 5000 litre capacity 600.00 Each 2. [2.EL016] EL016. SUBMERSIBLE COPPER CABLE 3 Core 6 sqmm 1560.00 Metre 3. [20.114.1]Supplying erection, testing of fully automatic electric control panel board for T/Wells in Pump Chamber consisting of MS sheet of thickness 14 gauge duly painted box type floor mounted made of angle Frame containing 1 no. fully automatic air brake starter suitable for Motor of the following capacity, Min switch of suitable range with HRC fuse, 1 no. volt meter (0 to 500 volts), 1 No. Amp. Meter of 0 to 100 amp. 3 sets of indicating lamp capacitor of suitable capacity and 1 no. single phase preventers with the timer switch including wiring in panel board and suitable electric energy meter wiring in Electric Control Panel Board complete in all respect as per specification given in Schedule No. II, Including MCB, suitable, Capacitor, Wooden Box etc as per site requirement complete in all respect. 1. 10 HP Motor 6.00 Each 4. [20.124.1]Supplying, erection, testing and commissioning of submersible pumping sets as per BIS SPECIFICATION No. 8034-1989 (as amended upto date for pumps) and IS 9283-1979 (as amended upto date for motor) the pump motor sets should be capable of pumping clear fresh cold water having characteristics as specified in Clause-4 of IS 8034-1989 and Clause 4.1 of IS 9283-1979. 1. LPM 400 Head 70 BHP 10.37 Say Round BHP 10.00 6.00 Each 5. [20.54.3]Providing GI pipes class B marked with IS: 1239 in 3.05 m length, their threading and welding with flanges (Heavy Duty) on both sides, jointing with nuts and bolts ( ‘W’ make), rubber gaskets , lowering into Tube wells and testing including carriage, loading, unloading etc. complete in all respects to the satisfaction of Engineer-in- Charge. 3. 80 mm i/d 36.00 Each 6. [20.90.1]Drilling of 250mm dia of bore through bokky type instrument complete in all respect including charges for shifting of infrastructures as per IS Code 12818: 1992 1. 0 to 50m BGL 180.00 Metre Haryana Engineering Works Portal Page 91 of 120 DNIT Name : Adampur Town :- DNIT for Su... Public Health Engineering Department Sr. No Description of Item with brief specification and reference to book of specification. Quantity Unit Rate to be quoted by the contractor/ society In figures In words 7. [20.91]Providing and Lowering 225 mm outer dia UPVC pipe threaded (10kg/CM2) duly ISI marked IS Code 12818:1992 complete in all respect as per directions of Engineer-in-charge 180.00 Metre 8. [20.92]Providing and lowering 225mm outer dia UPVC filter Jali (10 Kg/CM2) duly ISI marked IS Code 12818:1992 complete in all respect as per directions of Engineer-in-charge 72.00 Metre 9. [20.93]Providing and fixing 250 mm M.S. clamp as for suitable pipe with nut and bolt complete in all respect as per directions of Engineer-in-charge 6.00 Each 10. [20.94]Providing and fixing UPVC cap for 225mm outer dia UPVC pipe (10kg/cm2) duly ISI marked IS Code 12818:1992 complete in all respect as per directions of Engineer-in-charge 6.00 Each 11. [20.95]Development of tube well with pump of suitable rating to that full satisfaction and as directed by the Engineer-in-charge 360.00 Per Hour 12. [22.85.5]Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 5. 40 mm nominal outer dia Pipes

INR 1000 /-

INR 40830.0 /-

INR 20.41 Lakhs /-