Tender for the work of auditorium landscaping, HVAC and PA system in the convention center under construction in sector-8 of Ram Ganga Awasiya Yojana, 1 WALL PANELING & FALSE CEILING Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main T runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross T of size 24x25 mm made of 0.30mm thick (minimum) sheet, 1200 mm long spaced between main T at 600 mm center to center to form a grid of 1200x600 mm and secondary cross T of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main T runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete forall heights as per specifications, drawings and as directed by Engineer-in-charge.GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece. Make: Armstrong/ Sant GobainD.S.R. Item No. 12.52.2 2 Providing and installation of acoustical wall panelling wood finish Slats made out of MDF board , Melamine / veneer laminated finish, perforated wooden grooved slats (2mm grooves @ 8mm centers) / (2mm Slats @16mm pitch) / (2mm grooves @ 32mm centers) / (2mm grooves @ 64mm centers), backlined with black acoustical fleece, tongue-groove edge for a seamless look, FR grade, of lineal dimension size 128mm x 2440mm x 16mm thick having density 1000Kg /m3, weight12.8Kgs/m2 installed by using GI strut system. The GI strut system includes GI Cross channel having thickness 0.45mm, length 3600mm, knurled web 40mm, depth 10mm and equal flanges 15mm is fastened vertically/horizontally at every 600mm centers. Aluminium core cross channel having thickness 0.5mm, length 2400mm, web 15mm and 27mm, depth 18mm and flanges of 7mm with suitable edge and centre brackets is then fixed perpendicular to the cross channel with the help of fasteners at every 400mm centers. Contractor to Provide expansion joints of 3mm at every 5mts both ways. Make. Armstrong / Sant GobainAs per Ref. BOQ Item No. 1.27 3 Providing and fixing in position Auditorium High Back chairs of inner side size width (W1)490X480X1020 with push back mechanism having seat assembly made of polyuret lane oam mou ded with M.S. tubular frame insert which is upholstered with fabric. The structural should be as per technical specification as mentioned below :- Back :- Back of chair shall be 470mmX730mmX130mm upholstered constructed with 19mm thick ply having proper curvature for lumber support with PIT. moulded foam having density 40±51:g/cum, upholstered chair back to have plastic back shall duly embossed, bend and Formed by ABS. The back of chair should have provision of seat number and same will be provided by the chair supplier. Seat Chair seat size to be 480X490 with thickness of minimum 130mm with 19mm plywood this should be covered with minimum 120mm in P.U. foam, fully upholstered with P.U. moulded foam having density 45±5kg/cum.Side panels :- All side panel to be of 12mm thick plywood covered with fabric and fused with 25mm thick loam, side panel to cover all exposed metal part. The end panel of row should have provision of row number indicator with LED light. Arm rest:- 2nd class teak wood melamine Polished arm rest of size 425X.65X40mm of approved design will be fixed above side panels. Fabric :- The Fabric shall be inherent Fire Resistant Fabric, 100% Polyester Stretchable Circular knit. Fabric, of approved make , shade and design of minimum 400 GSM, quilted with foam bonded fabric of 5.0mm thick. (The shade and quality is to be finalized by Engineer-in-charge as well as by the client department.)Push back :- (A) 1. A metal sheet mechanism duly embossed of size 450X440X1.6mm. 2. Block to be 2 triangular blocks duly embossed — 300X300mm with 4 of 9mm holes. . 3. Longitudinal tubes of size 40x20x490 mm of 1.6mm thickness- with 2 tubes each and 4 longitudinal tube of size 20x6 mm duly bent in shape to shape Riveted/Welded & approximately 350 mm long. 4. Seal back Bracket interconnected/Riveted/Welded and Back Bracket to be 200X60X1.6mm. 5. Seat Bracket to have stopper cup with 5 rivets and approximately 170X340X1.5mm — 2pairs for Seat/Back. 6. All rivets to be with nylon washers and pneumatic machine only. 7. Rollers to withstand temperatures up to 200 degree and oi sizes 22mm width & 38mm Dia, duly riveted and welded supported by metal sheet of size 30mmX120mm- I Pair. 8. All stopper material to be reinforced by nylon tubes of size 30mm. 9. Metal stand to be 300X300X3mm duly bent in 1 piece supported by 3 structures 20X40X270mm each. (B ) All exposed Metal parts shall be Powder Coated with 7 Tank process of minimum 50 Microns. Rigid PVC civic shall be used to hide all dashfasteners withy Nut bolts used in chair. The chair shall be installed using suitable anchor fasteners. The sample of chair shall be got approved from Engineer-incharge as well as by client department also before making mass production. (Nu additional time shall he given for this activity.) Any minor rectification/changes in above nomenclature of auditorium chair as required by Engineer-in-charge as well as client department, the same will be accepted and adopted for execution at site of work which includes in the rate of above item. Nothing extra will be paid on this account.acceptable Make : Godrej, Mars Slider High Back W/o Desklet with PU Armtop Azure Blue Main Chair Make: Godrej Interio Market Rate 4 Providing and fixing in Auditorium Flooring and Steps - Woven vinyl carpet floorings of vinyl woven series with roll dimensions of 1.8/2mtr meters width and length of 20 meters or Tiles size as per company standard should be approved by architect. 2.50-2.80 mm thickness to laid on hard, levelled, smooth and moisture free sub floor. Woven Vinyl flooring should have traffic classification 33 and weight of 2.7-3.5 kg/m2. Flooring should have caster chair EN-985 tested with color fastness of more than 6. It should be ASTME662 qualified on Smoke density test. Product must be fire rating of the product should be Bfl-S1. Any Joints in flooring rolls should be sealed with cold welding. This work will be inclusive of all Labour, Raw Material, Hardware, adhesive etc. complete. Carpet will be provided as per approved shade and colour in Approved Makes- Vibrant Floors/Armstrong Flooring/MAC ,as per the satisfaction of the Architect and Engg. Incharge.Market Rate 5 Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc.Including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.D.S.R electrical Item No. 1.35make:Schneider/Northwest 6 Numbering of ceiling fan/ exhaust fan/ fluorescent fittings as required. make:Schneider/NorthwestD.S.R electrical Item No. 1.49 7 Providing and fixing circular/Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/M.S. sheet box by means of 3.3 mm dia round headed screwed, one loc at the conrners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.D.S.R electrical Item No. 14.15 8 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Disect Current(BLDC) motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value(CM/M/W) minimum 6, Air delivery minimum 210 Cum/Min, 350 RPM(tolerance as per IS: 374-2019), THD less than 10% remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise= 75 degree C(max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.D.S.R electrical Item No. 19.1make: Bajaj/Havells/Crompton 9 2 thick Slotted Wood Finish Wall Panel system on Masonry: Providing and fixing wall panelling on existing masonry with 50mm x 50mm Aluminium section framework of size 600mmx600mm grids and filled with acoustical insulation of 50 mm thickness 1000 gsm density from Star Insulation or Prime Insulation. The framework and acoustical infill is to be concealed behind the 15mm Slotted finish fire rated wood finish MDF panels from Topakustik, Wood Fit, Armstrong, Sound Slats, RPG or equivalent approved vendors. The perforated wood finish panels must have a minimum perforation area of 12% or higher and is to be supplied with black RP Tissue or equivalent of approved quality. This should be completed as per details and diagrams provided. Rate shall be inclusive of installation on the frame work arrangements. Works will be inclusive of scaffolding and staging at all levels. Rate shall include the preparation of detailed shop drawings as per site conditions, which shall be approved beforecommencement of worksMake : Armstrong/ Saint GobainAs per Ref. BOQ Item No. 1.26 10 ACOUSTIC DOOR WITH CHOWKHAT FOR DOOR OPENING SIZE 1.50M X 2.1M:Providing, Supplying, Installation, Testing and fixing in position a 65 mm thick acoustic door with chowkhat. Door should have a 150 mm x 300 mm vision panel of6.0 mm thick toughened glass. Both Shutters shall be made with 100mm x 50mm thick hardwood outer frame with 50 mm x 50 mm hardwood ribs at 500 mm c/cbothways. All woodwork shall be treated with anti-termite treatment. The door shutter shall have 6 mm thick BWP grade plywood fixed on its both sides. All the cavities inside the door shall be filled with high NRC acoustic insulation materials (rockwook of 60 kg/m3 density) Insides of the door will be lined with 3mm thick MLV Sheet of minimum 1700 kg/m3 density. Periphery of the the shutter shall be covered with 12mm thick teakwood lipping matching with the door frame. The external faces of the door shutter will be finished with 1mm thick laminate on both sides. Teakwood lipping will be melamine polished. Weather seal of Rehau make shall be fixed on the door frame to fill the gap of shutter and wooden frame. Drop down seal to be fixed in shutter to block the gap with floor when the door is closed. The cost shall include all hardware fittings like heavy duty SS Hinges ( 4inch long - 5 per door) , 1ft long D type SS 304 Handles of Godrej/Hettich/Dorma make ( both inside and outside).Make: GodrejAs per Ref. BOQ Item No. 1.19 11 Providing and fixing Godrej Kaditala 275 mm ChromeMake: GodrejAs per Ref. BOQ Item No. 1.20 12 Providing and fixing hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, for door weight upto 80 kg to 100 kg and door width from 750 mm to 900 mm), with double speed adjustment with necessary accessories and screws etc. complete.Make: GodrejAs per Ref. BOQ Item No. 1.21 13 Providing and Supplying factory made Podium table 8ft long x 2ft deep x 2.5ft high made with 25mm thick prelaminated HDF Board (all full round edges) with full Vanity panel on three sides and 3 internal vertical division panels of 1ft x 2.5ft for seating 3 persons on the TABLE. The design and color of the table will be as approved by the authorities.The table will have provision for fixing electrical points.The table will have provision for 8 Way LEGRAND POP-UP Box forDATA/HDMI/ELEC. points. Make : Legrand/SchneiderAs per Ref. BOQ Item No. 3.02 14 Providing and Supplying Podium Chairs ( Mid Back without wheels) of design and color approved by college authorities Make: Godrej/ Featherlite/ Geeken/ Durian MakeAs per Ref. BOQ Item No. 3.03 15 Providing and Fixing PVC Wall Paneling with all complete fitting Make : Armstrong/GyprocMarket Rate 16 Supplying of following LED fitting on recess/surface made of metallic CRCA powder coated steel / aluminium body, minimum system efficacy 100 Lumens/watt. Electronic in buit driver, PF>0.9, suitable for 220V-240V 50Hz A.C. supply, in the existing false ceiling with S.S. chain hanging arrangements/ on surface as per site condition including making connections with 3x1.5sq.mm FRLS copper conductor cable in steel flexible pipe, testing and commissioning etc. required.SITC of Step light Colour: Anthracite grey Material Aluminum Dimensions 201 x 91 x 35 Lamp Base LED IntegratedWattage 5W ( (Equivalent to Philips Model No. B07LH1FXLR)As per Ref. BOQ Item No. 2.26 17 Supplying of following dimmable LED fitting on recess/surface made of metallic CRCA powder coated steel / aluminium body, minimum system efficacy 100 Lumens/watt. Electronic in buit driver, PF>0.9, suitable for 220V-240V 50Hz A.C. supply, in the existing false ceiling with S.S. chain hanging arrangements/ on surface as per site condition including making connections with 3x1.5sq.mm FRLS copper conductor cable in steel flexible pipe, testing and commissioning etc. required. SITC of Recessed mounted 24 watt LED down lighter made up of high pressure die cast aluminium housing complete as required. (Equivalent to Lighting Technologies,MAke : Philips,Bajaj ) As per Ref. BOQ Item No. 2.25 18 Supplying of following LED fitting on recess/surface made of metallic CRCA powder coated steel / aluminium body, minimum system efficacy 100 Lumens/watt. Electronic in buit driver, PF>0.9, suitable for 220V-240V 50Hz A.C. supply, in the existing false ceiling with S.S. chain hanging arrangements/ on surface as per site condition including making connections with 3x1.5sq.mm FRLS copper conductor cable in steel flexible pipe, testing and commissioning etc. required. Supply of 1200 mm long 20 watt LED luminiare (Make : Philips,Bajaj, Havelles LUMILINEPLUSBS20WLED865SPCSS)As per Ref. BOQ Item No. 2.27 19 Installation, Testing and Commissioning of BAJAJ single LED Signage BESL 03 LED SSD WBB GREEN above the exit doors of the auditorium including providing fixing neccassry base plate , point wiring, fitting fixture etc. complete.MAke : Philips/Bajaj As per Ref. BOQ Item No. 2.28 20 Supply installation testing of LEGRAND 8 WAY Conference Table POP UP BOX, with power , Lan , HDMI, Audio ,CGA & USB including all necessary associated hardware . Make : Legrand/SchneiderAs per Ref. BOQ Item No. 2.29 21 Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure).2.1 (dsr hort. 2020) 22 Supplying and stacking of good earth at site including royalty and carriageupto 5 km lead complete (earth measured in stacks will be reduced by20% for payment).2.2 (dsr hort. 2020) 23 Supplying and stacking sludge at site including royalty and carriage upto 5km lead complete (sludge measured in stacks will be reduced by 8% forpayment).2.3 (dsr hort. 2020) 24 Supplying and stacking at site dump manure from approved source,including carriage upto 5 km lead complete (manure measured in stackswill be reduced by 8% for payment) :2.4.1 (dsr hort. 2020) Screened through sieve of I.S. designation 20 mm 25 Supply & plantation of Trees upto 8ft to 10ft height well settled, all indigenous varieties (local) as per listed below, location and quantities shall be as per drawingMangifera Indica (Mango), Bacopa Monnieri (Brahmi), Terminalia Tomentosa (Asna), Azadirachta Indica (Neem) & Bambusa Bambos (Baans)Terminalia Arjuna (Arjun), Tectoria Grandis (Sagaun), Shorea Robusta (Saal), Stereospermum Tetragonum (Padal), Anogeissus Latifolia (Bakli), Madhuca Longifolia (Mahua) & Diospyros Malabarica (Gaub) Saraca asoca (ashok), Ficus religiosa (peepal), Ficus benghalensis (bargad), Aegle marmelos (bel) & Phyllanthus emblica (aonla) Pterocarpus Santalinus (rakta chandan), Butea monosperma (dhaak), Artocarpus altilis (kathal) & Santalum album (chandan) Saraca Asoka (Sita Ashok), True Cinnamon (Nag Kesar), Mangolia Champaca (Champa) & Mimusops Elengi (Maulsari) Saussurea Ggossypiphora (Mratyusanjeevani), Azadirachta Indiac (Neem) & Adiantum Venustum (Hansraj) 26 Anti termite treatment of lawn area through premise 30.50% I P. one liter premise diluted in499literswaterandapplyingsolution@1.00 litresolutionpersqmlawnorbedarea. (two application) i/c cost of chemical) and as per direction of officer-in-charge.and as per directionof officer-in-charge.2.56 (dsr hort. 2020) 27 Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge.2.33 (dsr hort. 2020) 28 Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20%: one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately) 2.13(dsr hort. 2020) 29 Supplying and stacking of well decayed cattle manure at site including royalty and carriage upto 5 k.m.lead complete (Cattle manure measured in stacks will reduced by 8% for Payment).2.25 (dsr hort. 2020) 30 Providing and stacking of plant Mogra of height 25 to 30 cm., 2 to 3 branch in earthen pots of size 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. 4.88(dsr hort. 2020) 31 Providing and Displaying Budded Rose (H.T. variety) 3 to 4 healthy branch 30 cm and above ht. well developed with one and above flower plant in 20 cm Earthen Pot, as per direction of the officer-in-charge. 4.91(dsr hort. 2020) 32 Providing and Displaying Cycus cirsnallis well developed with fresh & healthy 35 to 40 lush green leaves in 40 cm Cement Pot as per direction of the officer-in-charge. 5.13(dsr hort. 2020) 33 Providing and Displaying Cyprus golden well shaped developed with good colored foliage fresh & healthy 60 to 75 cm ht in 30 cm Earthen Pot as per direction of the officer-in-charge. 5.17(dsr hort. 2020) 34 Providing and Displaying Ficus Starlight with fresh, healthy and attractive foliage 45 to 60 cm spread 75 to 90 cm ht., specimen bushy ,in 35 cm Cement Pot as per direction of the officer-in-charge. 5.28(dsr hort. 2020) 35 Providing and stacking of Alpinia Variegated (three in one) having ht. 30 cm and above, with fresh and healthy variegated foliage in 25 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge. 6.1 (dsr hort. 2020) 36 Providing and stacking of Asparagus marrie, well developed 15 to 20 leaves, full of branches and foliage in 25 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge. 6.3 (dsr hort. 2020) 37 Providing and stacking of Cuphea chinensis of ht. 20-30 cm full of branches and healthy foliage in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge. 6.10 (dsr hort. 2020) 38 Providing and stacking of Euphorbia milli hybrid variety, having ht. 30 cm to 45 cm with multi branch, full bloom, fresh and healthy leaves in 30 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.6.14 (dsr hort. 2020) 39 Providing and stacking of Ophiopogon jaburan (variegated) ,full of variegated leaves in Earthen Pot/Plastic Pot of size 20 cm. as per direction of the officer-in-charge. 6.21 (dsr hort. 2020) 40 Providing and stacking of Alstonia scholaris of height 150-165 cm. in bagof size 25 cm as per direction of the officer-in-charge. 7.4 (dsr hort. 2020) 41 Providing and stacking of Bauhinia purpurea (Kachnar) of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. 7.8 (dsr hort. 2020) 42 Providing and stacking of Butea frondosa (Flame of Forest) of height 60-75 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.7.13 (dsr hort. 2020) 43 Providing and stacking of Cassia siamea of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. 7.17(dsr hort. 2020) 44 Providing and stacking of lotus flower of height 150-165 cm. in bag of size 25 cm as per direction of the officer-in-charge. Mr 45 Providing and stacking of Bauhinia tomentosa (yellow) of height 60-75 cm. in earthen pots of size 20 cm as per direction of the officer-in-charge. 8.2(dsr hort. 2020) 46 Providing and stacking of Calliandra hybrida of height 105-120 cm., well branched, bushy in big size HDPE bag as per direction of the officer-in-charge.8.7(dsr hort. 2020) 47 Providing and stacking of Cassia laevigata of height 45-60 cm. in earthenpots of size 20 cm as per direction of the officer-in-charge. 8.11(dsr hort. 2020) 48 Providing and stacking of Chandni dwarf of height 15-20 cm., well branched in earthen pots of size 20 cm as per direction of the officer-in-charge. 8.14(dsr hort. 2020) 49 Providing and stacking of Nyctanthes arbor-tristis (Hasingar) of ht. 90-105 cm in Earthen pots of size 20 cm as per direction of the officer-in-charge. 8.54(dsr hort. 2020) 50 Providing and stacking of Allamanda violacea of height 30 cm to 45 cm. in poly bag of size 20 cm as per direction of the officer-in-charge. 9.2(dsr hort. 2020) 51 Providing and stacking of Clerodendrum thomsoniae of height 30 cm.to 45 cm in 20 cm size of poly bag & as per direction of the officer-in-charge.9.6(dsr hort. 2020) 52 Providing and stacking of Vernonia elaegnifolia (curtain creeper) plant of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. 9.14(dsr hort. 2020) 53 Providing and Stacking of Anjeer of height 75-90 cm. in poly bagsof size 25 cm as perdirection of the officer-in-charge. 11.1(dsr hort. 2020) 54 Providing and Stacking of Satavari, well developed in earthen pot of size 20 cm as per direction of theofficer-in-charge. 11.6(dsr hort. 2020) 55 Providing and Stacking of Sarpgandha well developed in poly bag of size 20 cm as per direction of theofficer-in-charge.11.14(dsr hort. 2020) 56 Providing and Stacking of Aprajita Blue well developed in poly bag of size 20 cm as per direction of the officer-in-charge.11.17(dsr hort. 2020) 57 Providing and Stacking of Aprajita White well developed in poly bag of size 20 cm as per direction of the officer-in-charge.11.18(dsr hort. 2020) 58 IRRIGATION SYSTEMDRIP IRRIGATION SYSTEM FOR PLANTATION - ASYSTEM HEAD UNIT SNAD FILTER + BACKWASH ASSLY 2.5Make : Astral/FinolexP.S. 59 SCREEN FILTER 2.5Make : Astral/FinolexP.S. 60 ASSLY FOR FILTER 2.5Make : Astral/FinolexP.S. 61 PRESSURE GAUGE + STOP COCKMake : Astral/FinolexP.S. 62 PRV Make : Astral/FinolexP.S. 63 NRV Make : Astral/FinolexP.S. 64 NETWORK- FINOLEX HDPE & PVC PIPESMake : Astral/FinolexHDPE PIPE 75 MM PN4 (TANK TO PLOT)P.S. 65 PVC PIPE 75 MM 4KG/CM2Make : Astral/FinolexP.S. 66 PVC PIPE 63 MM 4KG/CM2Make : Astral/FinolexP.S. 67 EMITTING SYSTEMMake : Astral/FinolexFINOGOL PLAIN LATERAL 16 MMP.S. 68 DRIPPER 8 LPH Make : Astral/FinolexP.S. 69 START TO END SET FOR DRIP LINE 16 MMMake : Astral/FinolexP.S. 70 BARBED COUPLER 16 MMMake : Astral/FinolexP.S. 71 TEE 16 MMMake : Astral/FinolexP.S. 72 ELBOW 16 MMMake : Astral/FinolexP.S.. 73 ELBOW 16 MMMake : Astral/FinolexP.S.. 74 BALL VALVE 63 MMMake : Astral/FinolexP.S. 75 FLUSH VALVE 63 MMMake : Astral/FinolexP.S. 76 VALVE BOX 12Make : Astral/FinolexP.S. 77 Pump: Crompton Greaves 10.00 Hp pumpwith necessary accessories.(Market Rate) P.S. 78 Providing and fixing H.D.P. container Syntex or alike one piece moulded water tank made out of low density polythyler and built corrugation including of delivery upto destinatin hoisting and fixing of accessories such as inlet,outlet over flow of all tanks capacity above 1000 to 20,000 litresMake : Astral/FinolexD.S.R. 18.48 79 Water tank platform& ShedExcavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. By Manual Means. (with prior permission of S.E.)D.S.R. Item No. 2.2.1) 80 Providing & laying cement concrete1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)D.S.R. Item No. 4.1.8 81 Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)D.S.R. 4.20.1.2 82 Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)D.S.R.4.20.1.3 83 Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.D.S.R. Item No. 5.22.1 84 Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand)D.S.R. 7.1.1 85 Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like. Cement mortar 1:6 (1 cement : 6 coarse sand)D.S.R. 7.2.1 86 Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) :13.33.1 Flush/ Ruled pointing sqm 87 Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.SHS 60x60x3 Column (5.34Kg/mtr)ISA 40X40X3 (1.83 Kg/mtr)Cleat ( 35X35X3)Base Plate ( 200x200x6)(7850 Kg/Cum)Top Plate ( 200x200x6)D.S.R. 10.20 88 Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces),D.S.R. Item No. 12.1.1 89 Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB, MP3 player (including 6 zone button paging station) with seamless integration facility with main fire alarm panel for voice evacuation complete asrequired. Make: Bose/D&B AudiotechnikD.S.R. Item No. 17.3.1 (Electrical) 90 Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as required.Make: Bose/D&B AudiotechnikD.S.R. Item No. 17.3.2 (Electrical) 91 Supplying, installation, testing & commissioning of 1.5/3/6W metal box ceiling/wall speakers complete as required.Make: Bose/D&B AudiotechnikD.S.R. Item No. 17.3.3 (Electrical) 92 Supplying, installation, testing & commissioning of ceiling/wall mounted loud speaker, 3/1.5 Watt in ABS enclosure complete as required.Make: Bose/D&B AudiotechnikD.S.R. Item No. 17.3.4 (Electrical) 93 Supplying, installation, testing & commissioning of 6 inches dia, 2 watts, 70/100 volts ceiling speaker complete as required.Make: Bose/D&B AudiotechnikD.S.R. Item No. 17.3.5 (Electrical) 94 Supplying, installation, testing & commissioning of digital audio amplifier 50 Watt, 25V rms operating at 240 volt ACsupply complete as required. Make: Bose/D&B AudiotechnikD.S.R. Item No. 17.3.6 (Electrical) 95 Supplying, installation, testing & commissioning of digital audio amplifier 75 Watt, 25V rms operating at 240 Volt AC Supply complete as required. Make: Bose/D&B AudiotechnikD.S.R. Item No. 17.3.7 (Electrical) 96 Supplying, installation, testing & commissioning of exit point directional sound speaker with voice and integral audio amplifier with selectable sound pulse patterns complete as required. Make: Bose/D&B AudiotechnikD.S.R. Item No. 17.3.8 (Electrical) 97 Supplying, installation, testing & commissioning of Voice command keypad 6 zone, with microphone assembly complete as required.Make: Bose/D&B AudiotechnikD.S.R. Item No. 17.3.9 (Electrical) 98 Supply, installation, testing and commissioning of 25 mm Outer dia CPVC PIPE with end caps including making air sampling opening of appropriate dia on appropriate interval and all accessories as required,(rate for area protected in sqm).Make : Astral/FinolexD.S.R. Item No. 17.4.1 (Electrical) 99 Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required.D.S.R. Item No. 17.5.1 (Electrical) 100 Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.D.S.R. Item No. 17.5.2 (Electrical) 101 Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessedsteel conduit of following pairs, cores and size including connections and interconnections etc. as required.Speaker cable Single pair, 2-core, 1.5 sqmmD.S.R. Item No. 17.5.3.1 (Electrical) 102 Speaker cable Two pair, 2-core, 1.5 sqmmD.S.R. Item No. 17.5.3.2 (Electrical) 103 Speaker cable Three pair, 2-core, 1.5 sqmmD.S.R. Item No. 17.5.3.3 (Electrical) 104 Speaker cable Four pair, 2-core, 1.5 sqmmD.S.R. Item No. 17.5.3.4 (Electrical) 105 Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and accessories like coupleretc. as required.D.S.R. Item No. 17.5.4 (Electrical) 106 AUDIO , VIDEO & LIGHTING WORKSSITC of Main FOH speaker having 12 inch woofer or better, min. 1.5-inch Compression driver ; Frequency Response : 82Hz-18kHz or better; Nominal Dispersion : 90° H x 60° V or better ; Power handling capacity : 250W or better; Nominal Impedance : 8O; Max SPL: 125 dB or better; Polyproylene enclosure, powder-coated finish; complete with all standard accessories as required.Make: Philips, Sony or JVRRate as per Ref. BOQ Item No. 6.01 107 SITC of Mounting/ Hanging arrangement of speaker complete with all standard accessories as required. Heavy duty Powder coated MS frame /Bracket fixed with SS Dash Fasteners of HILTI / FISHER MakeMake: Bose/D&B AudiotechnikRate as per Ref. BOQ Item No. 6.02 108 SITC of Active Subwoofer having 18 single driver; Frequency Response : 47Hz- 105Hz or better; Max SPL (Peak) : 132dB or better; Power handing capacity : 1200W or better; complete with all standard accessories as requiredMake:Philips, Sony or JVRRate as per Ref. BOQ Item No. 6.03 109 SITC of Active Stage Monitor Speaker System having 12 single driver; Frequency Response : 65Hz - 18kHz orbetter; Max SPL (Peak) : 126dB or better; Power handingcapacity : 1000W or better; complete with all standardaccessories as required.Make: Philips, Sony or JVRRate as per Ref. BOQ Item No. 6.04 110 SITC of Dual-channel professional amplifier with 2 inputchannel, should have power output of 2x 350W @8O and2 x 660W @4O or better; Should have power outputBridged mode 2000W @4O Should have Frequencyresponse: 10Hz- 21kHz or better; Total harmonicdistortion (THD): =0.05% or better; Channelsperation(Crosstalk): = -80 dB or better, S/N ratio >104dB or better, Built-in DSP feature complete with allstandard accessories as required. (Dynacord/Bose/Powersoft)Make: Bose/D&B AudiotechnikRate as per Ref. BOQ Item No. 6.05 111 SITC of Loudspeaker Management System 2 x 6 loudspeaker management system having 2x line inputs, 6x balanced outputs, input impedance > 50k O or better, CMRR: >45dB or better, Max. output level +22dBu or better, A/D performance Dynamic range >112dB Aweighted and D/A performance- Dynamic range 110dB Un- weighted or better complete with standard accessories as required.Make: Bose/D&B AudiotechnikRate as per Ref. BOQ Item No. 6.06 112 SITC of 16 channel analog mixer with 8 mic/line input or better & 2 stereo output or better; 2 or better group buses; 3 or better AUX / FX send, Frequency response : 20Hz- 20kHz or better; Phantom power : 48V or better; THD : 0.03% or better; complete with all standard accessories.Make: Bose/D&B AudiotechnikRate as per Ref. BOQ Item No. 6.07 113 SITC of Wireless Handheld microphone with Frequency response : 60Hz - 14kHz or better; Bandwidth: 24MHz; Total harmonic distortion (THD) : < 0.9%; Signal to noise ratio : > 103 dB; Pattern : Cardioid; Microphone type: dynamic; RF Power : 10mW or better; Operating time : 8 hours or better complete with all standard accessories.Make: Bose/D&B AudiotechnikRate as per Ref. BOQ Item No. 6.08 114 SITC of Wireless Lavalier microphone with Frequency response : 60Hz - 14kHz or better; Bandwidth: 24MHz; Total harmonic distortion (THD) : < 0.9%; Signal to noise ratio : > 103 dB; Pattern : Omnidirectional; Microphone type: Condenser; RF Power :10mW or better; Operating time : 8 hours or better complete with all standard accessories. Make: Bose/D&B Audiotechnik(Shure /Sennheiser/ Clock Audio / ElectroVoice)Rate as per Ref. BOQ Item No. 6.09 115 SITC of Wired handheld microphone with Frequency response : 50Hz - 16kHz or better; Pattern : Cardioid; Microphone type: Dynamic; Rugged metal housing; Sensitivity : 2.7mV/Pa or better, complete with all standard accessories. Make: Bose/D&B Audiotechnik(Shure /Sennheiser/ Clock Audio / ElectroVoice)Rate as per Ref. BOQ Item No. 6.10 116 SITC of CD player complete with all standard accessories(Gemini/LG/Panasonic/Sony)Rate as per Ref. BOQ Item No. 6.11 117 SITC of 4 Point XLR Junction Box complete with all standard accessoriesRate as per Ref. BOQ Item No. 6.12 118 SITC of 2 core 2.5 sqmm Speaker Cable complete with all standard accessoriesRate as per Ref. BOQ Item No. 6.13 119 SITC of 2 core PVC insulated Microphone Cable complete with all standard accessoriesRate as per Ref. BOQ Item No. 6.14 120 SITC of Connector & Patch Cords complete with all standard accessoriesRate as per Ref. BOQ Item No. 6.15 121 SITC of 9U Equipment Rack for housing all rack mountable equipments with internal wiring, front glass door; heat dessipation fans; movement wheels, power distributionunits etc. complete with all standard accessoriesRate as per Ref. BOQ Item No. 6.16 122 SITC of 6000 lumens laser Projector with 0.67 DMD technology or better; Contrast ratio (Native): 2,000:1 or better; Resolution : WUXGA or better; Inputs : 2 x HDMI or better, 1 x VGA or better, 1 x HDBaseT or better, 2x Audio in, 1x Mic in, 1x Audio out(3.5mm jack). Should have Horizontal & Vertical Keystone correction ±30°; should have 10-bit color display; Control : RS232 etc. complete.Make: PanasonicRate as per Ref. BOQ Item No. 6.17 123 SITC of Mounting/hanging arrangement of Projector complete with all standardaccessories.Rate as per Ref. BOQ Item No. 6.18 124 SITC of 150 motorized projection screen with 16:10 aspect ratio complete with all standard accessories (Somfy motor)Rate as per Ref. BOQ Item No. 6.19 125 SITC of Wall Plate type transmitter & Receiver extender with 1 x HDMI or better, 1 x VGA with audio input (Tx) or better, 1 x Twisted Pair output (Tx) or better; 1 x Twisted Pair Input (Rx) or better, 1x HDMI output(Rx) or better; transmission range :70 meter or better; Auto-switching between inputs; Supports computer and video resolutions up to 4K or better; Max Data rate : 10.2 Gbps or better; HDCP 1.4 or better compliant; complete with all standard accessories.Make :Extron/Crestron/Lightware / Liberty AV)Rate as per Ref. BOQ Item No. 6.20 126 SITC of 1.8 meter HDMI-HDMI Cable complete with all standard accessories.(Make: Belden/ Kramer / Liberty AV)Rate as per Ref. BOQ Item No. 6.21 127 SITC of 1.8 meter VGA-VGA with audio Cable complete with all standard accessories.(Make: Belden/ Kramer / Liberty AV)Rate as per Ref. BOQ Item No. 6.22 128 SITC of of Twisted Pair Cable complete with all standard accessories6.23 129 SITC of 100W High Quality LED Parcan Light complete with, Lamp source 3200K CCT Colour temperature CRI & TLCI Values above 95 COB LED source from Citizen/ Philips/ Osram/ Cree or reputed make (LM80 to be provided) DmX 512 dimming with 3 channel control Beam Angle of 9° / 25° / 45° Total Power Consumption of 165W High quality output replacing 1000W Halogen Par Flicker Free 100% for Tv & Film Cameras 11.7KHz Refresh Rate, Linear Dimming 0 ~ 100% Fuse and Internal safety protections Strobe option Adjustable 1~25 times/Sec Variable Fixture provided with Yoke of Manual Adjustment5 Pin XLR for DmX , Black powder coated body. RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015,EN61437-2-13:2014 LM79 Certificates from NABL Acrediated laboratory. Brand embosed impact on the light body for genuine product.(Make: Bajaj/Leksa Lighting / Kenson Solace / Aultra Lighting / Canara)Rate as per Ref. BOQ Item No. 6.24 130 SITC of 200W LED Profile Spot 19 Degree Light complete with, 3200K CCT Colour Temperature COB LED source from Citizen/ Philips/ Osram/ Cree or reputed make (LM80 to be provided) CRI & TLCI above 95, Strobe option Adjustable 1 ~ 25 times/Sec 4 Kinds of dimming curves, Black finish housing, Manual Focus with 4 Beam shaping cutters Efficient and well-designed Lamp reflector Efficient Copper tube based Heat Sink for Heat Dissipation Sleek and Unique Designed Light weight body Fixture provided with Yoke of Manual Adjustment DmX512 dimming with 1 or 3 Channel modes IP20 protection having Lux @ 3 Mtrs above 12040 suitable to illuminate the keypresentor or talent on stage. RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 . CE Certificationcompliant to EN60598-1:2015, EN61437-2-13:2014 LM79 Certificates from NABL Acrediated laboratory. Brand embosed impact on the light body for genuine product (eksa Lighting / Kenson Solace / Aultra Lighting / Canara)SITC of 200W LED Profile Spot 19 Degree Light complete with, 3200K CCT ColourTemperature COB LED source from Citizen/ Philips/ Osram/ Cree or reputed make (LM80 to be provided) CRI & TLCI above 95, Strobe option Adjustable 1 ~ 25 times/ Sec 4 Kinds of dimming curves, Black finish housing, Manual Focus with 4 Beam shaping cutters Efficient and well-designed Lamp reflector Efficient Copper tube based Heat Sink for Heat Dissipation Sleek and Unique Designed Light weight body Fixture provided with Yoke of Manual Adjustment DmX512 dimming with 1 or 3 Channel modes IP20 protection having Lux @ 3 Mtrs above 12040 suitable to illuminate the keypresentor or talent on stage. RDM Control options with latest technology (RDM ID to be specified)Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 . CE Certificationcompliant to EN60598-1:2015, EN61437-2-13:2014LM79 Certificates from NABL Acrediated laboratory.Brand embosed impact on the light body for genuine product(Make: Bajaj /Philips/ eksa Lighting / Kenson Solace / Aultra Lighting / Canara)Rate as per Ref. BOQ Item No. 6.25 131 SITC of 54 x 3W LED Par Light RGBW, Beam Angle 25° complete with LED source from Lumiled / Seoul / Nichia or reputed make (LM80 to be provided) (Leksa Lighting / Kenson Solace / Aultra Lighting / Canara) RGBW 3W Lamp source x 54 Pcs DmX 512 dimming with 8 Channel High Bright Red, Green, Blue, White LED’s Source Unlimited Color Mixing through DmX 0 ~ 100% Linear dimming , In built presets for different colors Strobe Mode 20 times/Sec Data DmX through 3 / 5 PinXLR’s 65dB ~ 130dB Sound sensing capacity Power In and Out Connections High precision colors, IP20 protectionPowder coated Black finish housing Having Sound Control & Master Slave Auto Run Mode Illuminate the Indoor stage with unlimited colour effects Rigidly built pressure die-casted Aluminium body.RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014 LM79 Certificates from NABLAcrediated laboratory. Brand embosed impact on the light body for genuine product. Make: Bajaj/PhilipsRate as per Ref. BOQ Item No. 6.26 132 SITC of Light fixture mouting clamp Customized for suspending on fixed bars on stage Made up of Aluminium Die casted MS threaded T bolt with yellow passivation finish Complete with black powder coating matt black finish. Safeworking load 150 KG Suitable to Batten of size 30 OD to 60 OD (Make: Leksa Lighting / Kenson Solace / Aultra Lighting / Canara)Rate as per Ref. BOQ Item No. 6.27 133 SITC of Light Fixture dual safety Chain made up of GI wire rope Bundled and twisted together Having load bearing capacity above 200 Kgs Sleve on the rope. CarabinerClip(Make: Leksa Lighting / Kenson Solace / Aultra Lighting / Canara )Rate as per Ref. BOQ Item No. 6.28 134 SITC of Fixed on stage Lighting bar/winch of 6 Mtr length constructed with an single contruction light bar Made out of 48mm Outer Dai, 40 Nominal Bore, Mild Steel Pip It shall be hanged from the roof to accommodate various type of stage light fittings. It should hang from the roof with MS angle which is suspended from the fish plate of 5mm thickness which is fixed on the rcc roof with 4 anchor fastners of 10mm.Each fastnerMade out of 48mm Outer Dai, 40 Nominal Bore Material for the light bar shall be of Mild Steel Pipe Dual Barrel Arrangement and an additional End Caps on the Pipe end Powder coated with Matt black Texture Fixing Through Suspenders as per site conditions.Suspender prices are included(Make: Leksa Lighting / Kenson Solace / Aultra Lighting / Canara )Rate as per Ref. BOQ Item No. 6.29 135 SITC of Power Distribution Electrical panel having a Individual MCB control for 6 outgoing circuits Made up of MS Sheet metal fabricated housing Black powder coated Ivery connectors for the internal terminations and external outgoing connecting points, Fibre / brass glands of suitable size fitted MCB control for outgoing circuits. Custom built as per specification and project requirement.(Make: Leksa Lighting / Kenson Solace / Aultra Lighting / Canara )Rate as per Ref. BOQ Item No. 6.30 136 SITC of High quality power junction box 4 way made up of MS Sheet metal fabricated housing. Snap fit fixing /15 (1.5mm ) Total Max Rating 10A, 250V A.C 20°C to +70°C Operating Temp Moldings: Nylon, Flammability Rating UL94V-0 Blackpowder coated, fibre glands of suitable size fitted with Powercon or IEC connector Box 10A. Clamp arrangement for fixing or Raul plug arrangement for wall / floorfixing.(Make: Leksa Lighting / Kenson Solace / Aultra Lighting / Canara )Rate as per Ref. BOQ Item No. 6.31 137 SITC of High quality power junction box 2 way made up of MS Sheet metal fabricated housing. Snap fit fixing /15 (1.5mm ), Total Max Rating 10A, 250V A.C 20°C to +70°C Operating Temp Moldings: Nylon, Flammability Rating UL94V-0 Black powder coated, fibre glands of suitable size fitted with Powercon or IEC connector Box 10A. Clamp arrangement for fixing or Raul plug arrangement for wall/floor fixing.(Make: Leksa Lighting / Kenson Solace / Aultra Lighting / Canara )Rate as per Ref. BOQ Item No. 6.32 138 SITC of High quality Dimming In junction box 1 way made up of MS Sheet metal fabricated housing High temperature resistant insulator material All metal housing offers best overall RF protection & electromagnetic shielding Black powder coated,fibre glands of suitable size fitted with 5 Pin DmX XLR Male socket Clamp arrangement for fixing or Raul plug arrangement for wall /floor fixing.(Make: Leksa Lighting / Kenson Solace / Aultra Lighting / Canara )Rate as per Ref. BOQ Item No. 6.33 139 SITC of DmX Loop Junction Box having 1 No. of DmX 5 Pin XLR Female Socket & 1 No. DmX XLR Male Socket fitted on to a sheet metal fabricated compact Junction box powder coated with matt black texture finish paint. High temperature resistantinsulator material All metal housing offers best overall RF protection & electromagnetic shielding. Clamp arrangement for fixing or Raul plug arrangement for wall /floor fixing.(Make: Leksa Lighting / Kenson Solace / Aultra Lighting / Canara )Rate as per Ref. BOQ Item No. 6.34 140 SITC of Internal Earthing System with copper bare conductors all along the cable trays, metal parts and Installation HardwaresRate as per Ref. BOQ Item No. 6.35 141 SITC of Black Powder coated cable trays made out of MS Sheet fabricated for a size of 40 x 75 x 40mm & 1.6 mm thickness undergone through 7 tank process with various chemical treatment to keep them rust free with perforation for heatdessipation provided with lid.Rate as per Ref. BOQ Item No. 6.36 142 SITC of DmX Male Female Connectors 5 Pin having rubber sheeth protection forCross connecting DmX wiring connections.(Make: Leksa Lighting / Kenson Solace / Aultra Lighting / Canara )Rate as per Ref. BOQ Item No. 6.37 143 SITC of DmX Male Termination Connector 5 Pin soldered with required capacity of resistor for signal deframing.(Make : Leksa Lighting / Kenson Solace / Aultra Lighting / Canara )Rate as per Ref. BOQ Item No. 6.38 144 SITC of DmX Controller 12 Faders to control atleast 12 channels with Master control fader ,12 Set Scene saving options Master Fader Enabled Controller , LCD display access,Eeasy access key pads 12 Physical Fader unit for direct access Incremental Channel Up & Down Buttons DmX 512 protocol.(Make: Leksa Lighting / Kenson Solace / Aultra Lighting / Canara )Rate as per Ref. BOQ Item No. 6.39 145 SITC of DmX Controller 12 Faders to control atleast 12 channels with Master control fader ,12 Set Scene saving options Master Fader Enabled Controller , LCD display access,Eeasy access key pads 12 Physical Fader unit for direct access Incremental Channel Up & Down Buttons DmX 512 protocol.(Make: Leksa Lighting / Kenson Solace / Aultra Lighting / Canara )Rate as per Ref. BOQ Item No. 6.40 146 SITC of FRLS Copper unarmoured Flexible cable IS694 having 3 Core each of 1.5 Sq mm size.Rate as per Ref. BOQ Item No. 6.41 147 SITC of 5 Core DmX Cable with Sheathed housing on the cable, well designed insulation, low noise suitable to transmit DmX signalRate as per Ref. BOQ Item No. 6.42 148 38 HP(As per DSR_VRF/VRV _2019_1.1) (Rate=16415X38) Make: Daikin/Mitsubishi Electric 149 36 HP(As per DSR_VRF/VRV _2019_1.1) (Rate=16415X36) Make: Daikin/Mitsubishi Electric 150 34 HP(As per DSR_VRF/VRV _2019_1.1) (Rate=16415X34) Make: Daikin/Mitsubishi Electric 151 12 HP(As per DSR_VRF/VRV _2019_1.1) (Rate=16415X12) Make: Daikin/Mitsubishi Electric 152 Indoor Unit Cassette TypeSupply, Installation, Testing & Commissioning of following minimum capacity 4-way flow VRF/VRF Cassette type indoor ceiling mounted unit equipped with synthetic washable media pre filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolator, cordess remote control etc., suitable for operation on single phase 230V + 10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS system or fire panel of the building. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature.Make: Daikin/Mitsubishi Electric3.2 TR 4 Way VRV/VRF Cassette Unit(As per DSR_VRF/VRV _2019_2.8) 153 2.0 TR 4 Way VRV/VRF Cassette Unit(As per DSR_VRF/VRV _2019_2.5) Make: Daikin/Mitsubishi Electric 154 0.8TR(As per DSR_VRF/VRV _2019_3.2)Make: Daikin/Mitsubishi Electric 155 1TR(As per DSR_VRF/VRV _2019_3.3) Make: Daikin/Mitsubishi Electric 156 1.3TR(As per DSR_VRF/VRV _2019_3.4) Make: Daikin/Mitsubishi Electric 157 1.65TR(As per DSR_VRF/VRV _2019_3.6) Make: Daikin/Mitsubishi Electric 158 2.0 TR(As per DSR_VRF/VRV _2019_3.7) Make: Daikin/Mitsubishi Electric 159 Indoor Unit Ductable TypeSupply, Installation, Testing & Commissioning of following minimum capacity and external static pressure VRF/VRV ceiling mounted ductable type indoor unit equipped with washable synthetic media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, corded remote control, outer cabinet, vibration isolators, drain pan, other necessary supports etc., suitable for operation on single phase AC supply 230 V + 10%, 50Hz, complete as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS system or fire panel of the building. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature.Mid Static Ductable Units (Minimum 45 Pascal External Static Pressure) Make: Daikin/Mitsubishi Electric4.0 TR(As per DSR_VRF/VRV _2019_4.16) 160 High Static Ductable Units (Minimum 110 Pascal External Static Pressure) Make: Daikin/Mitsubishi Electric5.5 TR(As per DSR_VRF/VRV _2019_4.17) 161 7.1 TR(As per DSR_VRF/VRV _2019_4.18) Make: Daikin/Mitsubishi Electric 162 8.0 TR(As per DSR_VRF/VRV _2019_4.19) Make: Daikin/Mitsubishi Electric 163 4.0 TR(As per DSR_VRF/VRV _2019_4.16) Make: Daikin/Mitsubishi Electric 164 11.0 TR (Market Rate) Make: Daikin/Mitsubishi Electric 165 15.0 TR (Market Rate) Make: Daikin/Mitsubishi Electric 166 17.0 TR (Market Rate) Make: Daikin/Mitsubishi Electric 167 Supply Installation, testing & commissioningof Y-joints for various size of Refrigerant pipe including insulation. (As per MR-1)(Rate=4123/1.18) 168 Centralized controllerSupply Installation, testing & commissioningofMainIntelligenttouch screen centralcontroller systemincluding all the accessoriessuitableto operate, monitor, on/off, temperature setting of all the indoor units individually complete as required and as specified. (As per MR-2) (Rate=80703/1.18) 169 Copper Refrigerant PipingSupply, Installation, Testing & Commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with with Class-O closed cell elastometric nitrile rubber insulation of specified thickness as given below for Suction and Liquid lines, exposed piping shall be protected with UV & water protective coating, all accessories as per specifications etc. as required:6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation (As per DSR_VRF/VRV _2019_5.1) 170 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation(As per DSR_VRF/VRV _2019_5.2) 171 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation(As per DSR_VRF/VRV _2019_5.3) 172 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation(As per DSR_VRF/VRV _2019_5.4) 173 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation(As per DSR_VRF/VRV _2019_5.5) 174 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation(As per DSR_VRF/VRV _2019_5.6) 175 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation(As per DSR_VRF/VRV _2019_5.8) 176 34.9 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation(As per DSR_VRF/VRV _2019_5.10) 177 41.27 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation(As per DSR_VRF/VRV _2019_5.12) 178 Drain PipingSupplying & fixing of UPVC drain piping with all fitting such as bends, tees etc. necessary clamps, adequate support duly insulate with 9 mm nitrile rubber insulation complete as per technical specifications, requirement, standardard and drawings complete as required.50 mm dia(As per MR-3)(Rate=298/1.18) 179 40 mm dia(As per MR-3) (Rate=204/1.18) 180 32 mm dia(As per MR-3) (Rate=157/1.18) 181 25 mm dia (As per MR-3) (Rate=121/1.18) 182 Inline FansSupply, Installation, testing and commissioning circular direct driven / cabinet inline fans of G.I. construction complete with centrifugal fan with motor, accoustically lined, canvass connection at inlet and outlet complete with electric panel with MCB and relays, with 5 Rm cabling and earthing complete as per standards, requirement and drawings. 3300 cfm 20 mmwg S.P(As per MR-4)(Rate=45163/1.18)Make: Daikin/Mitsubishi Electric 183 800 cfm 15 mmwg S.P(As per MR-4) (Rate=23520/1.18) Make: Daikin/Mitsubishi Electric 184 550 cfm 15 mmwg S.P(As per MR-4) (Rate=17064/1.18) Make: Daikin/Mitsubishi Electric 185 500 cfm 15 mmwg S.P(As per MR-4) (Rate=17064/1.18) Make: Daikin/Mitsubishi Electric 186 450 cfm 15 mmwg S.P(As per MR-4) (Rate=15743/1.18) Make: Daikin/Mitsubishi Electric 187 400 cfm 15 mmwg S.P(As per MR-4)(Rate=15743/1.18) Make: Daikin/Mitsubishi Electric 188 350 cfm 15 mmwg S.P(As per MR-4)(Rate=15743/1.18) Make: Daikin/Mitsubishi Electric 189 300 cfm 15 mmwg S.P(As per MR-4) (Rate=14056/1.18) Make: Daikin/Mitsubishi Electric 190 250 cfm 15 mmwg S.P(As per MR-4) (Rate=13102/1.18) Make: Daikin/Mitsubishi Electric 191 200 cfm 15 mmwg S.P(As per MR-4) (Rate=13102/1.18) Make: Daikin/Mitsubishi Electric 192 150 cfm 15 mmwg S.P(As per MR-4) (Rate=12662/1.18) Make: Daikin/Mitsubishi Electric 193 100 cfm 15 mmwg S.P(As per MR-4) (Rate=12662/1.18) Make: Daikin/Mitsubishi Electric 194 Propeller Type FanSupply, installation, testing and commissoning of propeller type fan for exhaust air complete with in and out gravity louvers, 3 pin socket with 5RM cabling complete as per specifications, requirement, standard and drawings.Make: Daikin/Mitsubishi Electric200 mm dia,5 mmwg S.P. (As per MR-5)(Rate=13039/1.18) 195 Exposed Copper Pipe CoatingSupplying and fixing of UV/fire/water, thermal protective coating, with canvas/glass fibre cloth, coating on copper pipe insulation by wrapping canvas/glass fibre cloth dipped instarbond/polybond30-36completeasperspecificationsanddrawings.(Thepriceshouldbequotedconsideringminimum3coatsof30-36chemical). (AsperMR-6) (Rate=587/1.18) 196 Packaged Type AirwasherSupply, installation, testing and commissioning of floor mounted CELLULOSE FILL AIR-WASHER complete with double skin construction fabricated out of extruded aluminium sections with 0.8 mm thick pre-plasticised GI sheet on out side and 0.8 mm thick plane GI sheet inside with 25 mm thick insulation, 40 Kg / m3 density PUF insulation in between. The unit shall comprise of supply fan sections with DIDW backward curve fans (efficiency not less than 75%) suitable for static pressure as required,belt drivepackage with TEFC drive motor of efficiency class IE3suitable for 415 ± 10% V, 50Hz, 3 Phase AC supply, giving 95% adiabatic saturation efficiency at 500 FPM air velocity across pads, factory assembled and complete with 16 gauge GI casing for Air washer section, 18G SS-304 water tank, Cellulose fill, water distribution header, PVC piping, butterfly valves, for quick fill, isolation of tank, pumps and brass strainers, Y strainers, fire rated flexible duct connections & aluminium volume control damper at blower discharge and necessary fittings, belt drive package, necessary vibration isolation arrangement etc. complete as per specification and of following capacities. The fan and motor shall be mounted on aluminium extruded section.The unit shall also include provision of GSS partitions duly reinforced at intake side of air washer and GSS louvers with bird-screen synthetic washable filters and four bend PVC drift eliminators and horizontal monoblock pumps of suitable rating, factory mounted on mild steel channel base with electric motor for circulation of water. Pumps shall be aligned and suitable for 415±10% volts, 50 cycles 3 phase power supply. One No. 3 phase isolator switch in weather proof enclosure shall be provided near motor complete as required confirming to specification. Make: Daikin/Mitsubishi Electric3,000 CFM, 50 mmwg Static Pressure (As per MR-7)(Rate=205427/1.18) 197 Exhaust ScrubberSupply, installation, testing & commissioning of double skin exhaust scrubber of 0.6 mm inner and outer skin construction fabricated from precoated sheet blower housing with DIDW backward curved centrifugal blower with fan motorand belt drive arrangement with totally enclosed fan cooled class F insulation, with IP 55 protection, TEFC high efficiency motor type IE-3 suitable for 415+-10% volts, 50 HZ, 3 Phase A.C. supply, all accessories like common base frame, fan, motor pulley, belts, fire proof canvass connection, vibration isolator, prefilters, wet scrubber section, spray, nozzels, filters, M.S. frame for supports etc.complete as per specifications, requirement, standardard and drawings.Make: Daikin/Mitsubishi Electric4,000 CFM, 65 mmwg Static Pressure (As per MR-8) (Rate=220100/1.18) 198 DuctingSupply, installation, balancing and commissioning of factory fabricatedGSS sheet metal rectangular ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.G.I. Sheet Metal Ducting (Rectangular)Thickness 0.63 mm sheet (As per DSR_E&M _2022_16.12.1.1)(Rate=1080/1.12) 199 Thickness 0.80 mm sheet (As per DSR_E&M _2022_16.12.1.2)(Rate=1263/1.12) 200 Thickness 1.0 mm sheet (As per DSR_E&M _2022_16.12.1.3)(Rate=1381/1.12) 201 Thickness 1.25 mm sheet (As per DSR_E&M _2022_16.12.1.4)(Rate=1836/1.12) 202 Grilles / DiffuserSupply, installation, testing and commissioning of Aluminium extruted powder coated supplyand returnairgrilles/ diffusers as per specifications and drawings (Approval of colour shall be taken from Architects/Consultants).Supplying&fixingofpowdercoatedextrudedaluminiumSupplyAirGrillswithaluminiumvolumecontroldampersasperspecifications.(AsperDSR_E&M_2022_16.15)(Rate=9105/1.12) 203 Supplying&fixingofpowdercoatedextrudedaluminiumReturnAirGrillswithlouversbutwithoutvolumecontroldamperscompleteasrequired.(AsperDSR_E&M_2022_16.16)(Rate=5910/1.12) 204 Supply, fixing, testing & commissioning of Return air diffussers of powder coated aluminium without volume control dampers with anti smudge ring & removable core.(As perDSR_E&M _2022_16.18)(Rate=8121/1.12) 205 LouversSupply and fixing of Fresh / Exhaust air Aluminium extruded with bird screen, damper adjustable louvers as per specifications and drawings.(As per MR-9)(Rate=12986/1.18) 206 Volume Control DamperSupply, installation,testing andcommissioning ofGIvolumecontrol duct damper completewith neoprenerubber gaskets, nuts, bolts, screws linkages,flanges etc, as per specifications. (As per DSR_E&M _2022_16.13)(Rate=7046/1.12) 207 Flexible DuctSupply of 25 mm glass wool insulated double lamination of metalize polister film parmantely bounded to a coated spring wire, helix and resistant construction of tear and pincture branch and collor where ever suitable of following sizes. Connected at both ends with necessary jublie clamps150 MM Dia(As per MR-10)(Rate=404/1.18) 208 IsolatorSupplying & installation of weather proof isolator with suitable rating near each outdoor unit and complete as required. 63 Amps(As per MR-11)(Rate=5136/1.18) 209 40 Amps(As per MR-11)(Rate=5136/1.18) 210 Control & Transmission WiringSupplying & fixing control cum transmission wiring of copper in heavy duty conduits PVC conduits between indoorand out door unit. (As per MR-12)(Rate=113/1.18) 211 Sub Panel For KitchenSupply, installation,testing & commissioning of sub panel board cubical compartmentalised, weather proof Floor/ Wall mounted made of 2.0 mm thick steel sheet duly painted completewithvoltmeter,ammeter,indicatinglightsforselectorswitch,incoming/outgoingfeeders,NO/NC contactors,CTScontactorscompleteasperspecificationsand requirement1 No. 32 Amps TPN incoming MCB1 set 40 Amps TPN Aluminium conductor bus bar duly sleeved.2 Nos. 25 Amps MCB outgoing along with 2 Nos. DOL starter for Scrubber Motor (5.5 kw) (1 No Spare). 2 Nos. 16 Amps MCB outgoing along with 2 Nos. DOL starter for Airwasher Motor (3.7 kw) (1 No Spare).3 Nos. 6 Amps SPN MCB outgoing for Airwsher & Scrubber Pump.(0.37 / 0.55 kw) (1 No. Spare).(As per MR-13)(Rate=124723/1.18) 212 Power CablingSupply & fixing of PVC sheathed Aluminium / Copper cables for various equipments through walls/ceiling with appropriate clamps & fixing arrangement as per specifications and drawings.3C - 4 sqmm (Aluminium) for Airwasher & Scrubber(As per MR-14)(Rate=126/1.18) 213 3C - 2.5 sqmm (Aluminium) for Airwasher & Scrubber pump(As per MR-14)(Rate=117/1.18) 214 4C - 16 sqmm (Copper) (As per MR-14)(Rate=1102/1.18) 215 4C - 10 sqmm (Copper) (As per MR-14)(Rate=753/1.18) 216 Cable TraySupplying and installation of following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required.150 mm width X 50 mm depth X 1.6 mm thickness(As per DSR_E&M _2022_4.1.2)(Rate=604/1.12) 217 300 mm width X 50 mm depth X 1.6 mm thickness(As per DSR_E&M _2022_4.1.4)(Rate=777/1.12) 218 450 mm width X 50 mm depth X 1.6 mm thickness(As per DSR_E&M _2022_4.1.6)(Rate=1137/1.12) 219 EarthingProviding and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. (As per DSR_E&M _2022_5.15)(Rate=244/1.12) 220 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.(As per DSR_E&M _2022_5.16)(Rate=70/1.12) 221 Ductable Split UnitSupplying,installation,testing & commissioning of ductable type split unit air-conditioners with evaporator with coil, fan and fan motor, aircooled condenser with hermatically sealed scroll compressor, condenser coil, propeller fans controls, mounting stand for ODU, control panel, corded remote, canvass connection as per standards, requirement and drawings.Make: Daikin/Mitsubishi Electric3.0 Tons(1 Working & 1 Standby) for Server Room(As per MR-15)(Rate=88040/1.18) 222 Refrigerant Piping (For Split)Supplying & installation copper soft/hard refrigerant piping along (Circuit length) with control cabling and earthing should be insulated with 9 mm thick pipe section of nitrile rubber complete in all respect.3.0 Tons Ductable Split Unit(As per MR-16)(Rate=1981/1.18)
