Tender For Bharat Bhari Nagar Panchayat Water Supply Reorganisation Scheme Dist Siddharthanagar, Construction of Over head tank, pump house, staff Quarter, Boundry wall, Distributation system of pipeline, Water Rechaging unit, Scada Room,New Tube Well andE&M Releated Work in Bharat Bhari Nagar Panchayat Re-orgnization Water Supply Scheme. 1 Pump House cum Chloronome (2.5mx3.0mx3.0m)cum (2.5mx1.3mx3.0m) and(3.6mx3.0mx3.0m)cum (1.2mx1.8mx3.0m) 2 Excavation in foundation in ordinary soil (loam, clay or sand) including lift up to 1.5m and lead up to 50m. Filling, watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and disposal of surplus earth up to a distance of 50m. from the centre of the foundation trenches. 3 Concrete with 40 mm gauge stone ballast, local sand and cement in proportion(8:4:1) in foundations and floors including supply off all materials, labour T and P etc. required for proper completion of the work. 4 First class brick work in1:6 cement and coarse sand mortar in foundation and plinth with proper curing including supply of all materials labour, T& P etc. required for proper completion of the work. 5 First class brick work in1:4 cement and coarse sand mortar in foundation and plinth with proper curing including supply of all materials labour, T& P etc. required for proper completion of the work. 6 (i) For chamber into PH. 7 As in item 1.03 above but in superstructure includingnecessary cutting and moulding of bricks as required and also including honey comb brick work thickness of wall not to be less than 1 brick. 8 As in item 1.04 above but in 1:4 superstructure includingnecessary cutting and moulding of bricks as required and also including honey comb brick work thickness of wall not to be less than 1/2 brick wall.(Above verandha slab) 9 20 mm thick damp proof coursewith cement and approved course sand in 1:2 including 5% water proofing materials of in the proportion as specified for proper complition of the work and including curing and shuttering as necessary. 10 R.C.C work with cement, coarse sand and 20mm gauge approved stone ballast in proportion of 1:1.5:3 in lintels of doors and windows,slab&chhaja excluding supply of reinforcement and itsbending, but including its fixing and binding the same with 0.50mm thick binding wire(to be supplied by the contractor) and including centering and shuttering, supply of all materials, labour, T & P etc. required for proper completion of the work. 11 (i) SLAB 12 (ii) BEAM/LINTAL 13 (iii) CHHAJJA 14 Mild steel or iron work in plain work such as R.C.C. or R.B. work (when not included, in over all rates) ,wrought to required shape as necessary incluiding bending for proper completion of thework incluiding supply of steel and.wastage. 15 Cement concrete with 20 mm gauge approved stone ballast,coarse sand and cement in the propotion of 4:2:1 including supply of all materials labour, T & P etc. required for proper completion of the work. 16 (i)For fixing of r.s. joist/hold fast etc. 17 R.C.C. man holecover (0.85*0.85*0.10m.) 18 Supply &fixing of angle iron of size 40*40*5mm door chaukhat including fixing of holdfast &125 mm size heavey duty hinges etc. complete. 19 (i) Size 1.2 *2.10 and 0.9*2.10 or as per direction of engineer-in-charge. 20 Supply &fixing of angle iron of size 40*40*5mm window/ventilator chaukhat with grill including fixing of holdfast &100 mm size heavey duty hinges etc. complete. 21 (i) Size 1.2*1.50 , 0.90 * 1.50 and 0.30 * 0.30-06no. as per direction of engineer-in-charge. 22 Supply and fixing of 35 mm thick plywood doorshutter Excluding AL drop tower bolt,handle,silencer & stoper etc. complete.All the accessaries should be heavey duty & approved make & quality. 23 Supply and fix 35mm thick sheesham wood fully Panelledwindows shutters including supply and fixing of wooden cleats and stops and fixing adjustments of hinges bolts locks handles spring and other fittings 24 Providing and fixventilators (as square bar grill) over opening including supply of all materials, labour, T&P etc. required for proper completion of work as per direction of Engineer-in -charge. 25 12 mm thick plaster in 1:6 with cementand coarse sand mortar over brick work minimum thickness not to be less than 10 mm, including supply of all materials, labour, T. & P.etc.Required for proper completion of the work. 26 12 mm thick plaster in 1:6 with cementand coarse sand mortar over rough face of onebrick work minimum thickness not to be less than 10 mm, including supply of all materials, labour, T. & P.etc.Required for proper completion of the work. 27 20mmthick cement plaster in dado or skirting in (1:2) consisting of cement and coarse sand laid in panels finished with 3mm floating coat of neat cement or 1:5 cement and marble dust including supply of all materialslabour T & P etc required for proper completion of the work. 28 Sand filling in plinth including supply of necessary quantity of sand from A distance not exceeding 10 km. from the site of work and including watering, dressing, etc. Rate to include the cost of all materials, labour, T and P etcrequired for proper completion of the work. 29 25mm thick 1:2:4 plain cement concrete floor and appron with cement coarse sand and 20mm gauge stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio1:5 as specified over and including 75mm thick base concrete consisting of cement local sand and 1st class brick ballast 40mm gauge in the proportion of 1:4:8 and removing any overlapping or mortar at the joints of panels if any and giving them uniform finish including supply of all materials labourand T and P etc. required for proper completion of the work. 30 40 mm thick 1:2:4 plain cement concrete floor with cement coarse sand and 20mm gauge stone ballast laid in panels finished with 3 mm floating coat of neat cement or cement and marble dust in ratio1:5 as specified.(without base concrete.) 31 Painting or varnishing new iron work in small areas or new wood work with one coat priming and two coat of approved paint or varnish including supply of all materials, Labour and T & P etc required for proper completion of the work. 32 White washing three coat including supply of all materials labour and T and P etc. required for proper completion of the work. 33 Finishing wall with waterproof cement paint of approved make and quality over one priming coat on new work with two coats, to give an even shade. Including prepration of surface &supply of all matrials labour T&P etc. required for proper completion of the work. 34 Supply of Rolled steel joists complete. Size 225*100*100mmLength - 2.9m. 35 Supply of Rolled steel joists complete. Size 225*100*100mmLength - 3.4m. 36 Fixed in position item no 1.33 excluding cost of joists but including all labour in handling and hoisting etc. complete.Size 225*100*100mm & Length - 2.90m. 37 Fixed in position item no. 1.34excluding cost of joists but including all labour in handling and hoisting etc. complete.Size 225*100*100mm & Length - 3.4m. 38 Supply and fix 100 mm dia. A.C. down pipe complete with rose heads bands with eye hole and groutings etc fixed to walls with suitable clamps . 39 Supply & Fixing of oxidized stainless steelfitting for door& window (AL drop tower bolt,handle,silencer & stoper etc.). 40 Anti termit treatment in foundationincluding supply off all materials, labour T and P etc. required for proper completion of the work. 41 Repairing & painting of Existing Pump House of Size (3.00 x 3.60 ) cum Chlorinating roomof size ( 1.2 x 1.8 ) . all releated work completion as per direction of Engineer in chargeincludingall material, labour,T&P etc.required for proper completion of work . 42 BY PASS CHAMBER 43 Excavation in foundation in ordinary soil (loam, clay or sand) including lift up to 1.5m and lead up to 50m. Filling, watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and disposal of surplus earth up to a distance of 50m. from the centre of the foundation trenches. 44 Concrete with 40 mm gauge stone ballast, local sand and cement in proportion(8:4:1) in foundations and floors including supply off all materials, labour T and P etc. required for proper completion of the work. 45 I First class brick work in1:6 cement and coarse sand mortar in super structure with proper curing including supply of all materials labour, T& P etc. required for proper completion of the work 46 25mm thick 1:2:4 plain cement concrete floorwith cement coarse sand and 20mm gauge stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio1:5 as specified over and including 75mm thick base concrete consisting of cement local sand and 1st class brick ballast 40mm gauge in the proportion of 1:4:8 and removing any overlapping or mortar at the joints of panels if any and giving them uniform finish including supply of all materials labourand T and P etc. required for proper completion of the work. 47 20mmthick cement plaster in dado or skirting in (1:2) consisting of cement and coarse sand laid in panels finished with 3mm floating coat of neat cement or 1:5 cement and marble dust including supply of all materialslabour T & P etc required for proper completion of the work. 48 12 mm thick plaster in 1:6 with cementandl ocal sand mortar over rough face of onebrick work minimum thickness not to be less than 10 mm, including supply of all materials, labour, T. & P.etc.Required for proper completion of the work. 49 Boundary wall approach road etc 50 Excavation in foundation in ordinary soil (loam, clay or sand) including lift up to 1.5m and lead up to 50m. Filling, watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and disposal of surplus earth up to a distance of 50m. from the centre of the foundation trenches. 51 Concrete with 40 mm gauge stone ballast, local sand and cement in proportion(8:4:1) in foundations and floors including supply off all materials, labour T and P etc. required for proper completion of the work. 52 I First class brick work in1:6 cement and coarse sand mortar in foundation and plinth with proper curing including supply of all materials labour, T& P etc. required for proper completion of the work 53 20 mm thick damp proof coursewith cement and approved course sand in 1:2 including 5% water proofing materials of in the proportion as specified for proper complition of the work and including curing and shuttering as necessary. 54 As in item 4.03above but in 1:4 superstructure includingnecessary cutting and moulding of bricks as required and also including honey comb brick work thickness of wall not to be less than 1/2 brick wall.(Above verandha slab) 55 12 mm thick plaster in 1:6 with cementand coarse sand mortar over brick work minimum thickness not to be less than 10 mm, including supply of all materials, labour, T. & P.etc.Required for proper completion of the work. 56 12 mm thick plaster in 1:6 with cementand coarse sand mortar over brick work minimum thickness not to be less than 10 mm, including supply of all materials, labour, T. & P.etc.Required for proper completion of the work for pillar face.on rough surface. 57 Finishing wall with waterproof .Cement paint of approved make and quality over one priming coat on new work with two coats, to give an even shade. Including prepration of surface &supply of all matrials labour T&P etc. required for proper completion of the work. 58 Supply of fixing of 3.6 m wide gate including construction of pillars as per departmental type design including if all material, labour,T&P etc.required for proper completion of work 59 Construction of 80mm thick c.c. coloured interlockingpavers tiles with30mm thick fine sand bed over 100mm thick 1:6:12 C.C. basewith proper slope and camber including all material labour, T&P etc.required for proper completion of work. 60 Provision for aboroculture for all zone water works compound includingall material, labour,T&P etc.required for proper completion of work . 61 Repairing & painting of Existing Boundry wall in Zone-1 all releated work completion as per direction of Engineer in chargeincludingall material, labour,T&P etc.required for proper completion of work . 62 Provide all materials, labour, T and P etcrequired for proper completion of the work including leveling dressing exacavation of filling of earth where necessary for devolopment of water works sites including carriage of earth from distance of about 8 km. 63 Distrbution system,Rising main 64 Excavation for pipe line trenches including lift upto 1.50m and lead upto 50 m and refilling, watering, ramming of excavated earth in to trenches as per direction of engineer-in charge. 65 Supply,laying in true to alignment & gradient in trenches and testing of the following size and type of pipes with coupler,specials and all jointing materials such as solvent cement rubber rings etc.including F.O.R. destination, insurance and with loading, unloading and stacking etc. complete. 66 D.I.-K-9 (Rising Main) 67 dia- 80 MM 68 dia- 100 MM 69 dia- 150 MM 70 dia- 200 MM 71 D.I.-K-7 72 350mm 73 300mm 74 250mm 75 H.D.P.E PIPE 76 (i) 200mm 77 (ii) 160mm 78 (iii) 140mm 79 (iv) 110mm 80 (v) 90mm 81 Supply and fixing in position including supply of jointing materials such as nuts-boalt, rubber insertion white lead,valves and specials required etc. completeof the following size of C.I.D./F. Sluice valves, scour valves,20mm dia scewed down type air valve and fire hydrant containing80mm dia sluice valve and its accesories as per latest I.S. specification including F.O.R. destination, all taxes and insurance etc. complete for proper completion of work. 82 Sluice valve 83 350 mm dia 84 300 mm dia 85 250 mm dia 86 200 mm dia 87 150 mm dia 88 125 mm dia 89 100mm dia 90 80 mm dia 91 65 mm dia 92 Scour valve 93 80 mm dia 94 Air valve 95 20 mm dia 96 Firehydrant 97 Supply of all materials, labour,T&P etc.complete forconstruction of following chamber as per department type design. 98 Sluice valve chamber (masonary Type) 99 Sluice valve chamber (surface box Type) 100 Fire Hydrant 101 Air Valve Chamber 102 Scour Valve Chamber 103 Dismanting of Following type of surfaces including sorting out and stacking of serviceable materials and disposal of unserviceable materials upto a distance of 50 m. 104 (i) C.C.Road 105 (ii) Bituminous surface 106 (iii) B.O.E. Surface 107 (iv) Interlocking Surface 108 Provision for crossing of nalas, road, culvert and embankments (bundhs) etc. including shifting of telephone cables etc.along the alignement of pipe line including supply of C.I.Tyton pipes and specials,and their laying and jointing testing etc.complete . 109 i-Nala Crossing/culvert crossing 110 ii-Road Crossing through trenchless technique (80mm to 150mm) 111 iii-Road Crossing through trenchless technique (200mm to 350mm) 112 Reinstatement of above dismentalled road surface with old and new materials including supply of all materials, labour, T&P etc. required for proper completion of the work. 113 i-C.C.Road 114 ii-Bituminous surface 115 iii-B.O.E. Surface (Assuming 50% new brick and 50% old bricks used) 116 iv-Interlocking Surface (Assuming 50% new brick and 50% old bricks used) 117 Interconnection of new pipeline with existing pipeline including trenching,jointing,testing etc complete. 118 Making house connection with 20mm(OD) HDPE / AC/D.I. pipe main with Supply,Carting ,laying , jointing and fixing of the 15 mm (OD) G.I. pipe ,I.S.I. Mark Gunmetal Ferrul , I.S.I. Mark saddle/clamp of required size, C.I. bib kock of approved quality, J-Hook or M.S.U-clamp, 25cmX25cmX25cm C.C grouting of unsupported G.I. pipe all connection in inside thehouse and support on wall with suitable clampas perdirected by engineer-in chargeincluding cost of all jointing material, specials, labour, testing andT&P etc. complete. 119 R.C.C. with cement, coarse sand & 20 mm gauge stone ballast in proportion of 1:1.5:3 in thrust blocks of pipe line excluding supply of reinforcement & its bending but including its fixing & binding the same with 0.50 mm thick binding wire in position & necessary centering & shuttering including curing and supply of all materials, labour, T & P etc. required for proper completion of the work. 120 Mild steel or iron work in R.C.C. wrought to required shape as necessary including bending for proper completion of the work including supply of steel & wastage etc. 121 OHT 122 Supply of all materials labour T&P etc. for complete construction of R.C.C. Over Head Tank following typeCapacity andstaging above ground level with main components, including cost of soil testing and assuming bearing capacity of soil as 8 MT, with supply of design and drawings.All the water retaining components of OHT shall be casted in M-30 concrete and minimum grade of concrete of foundation and staging should be M-25 with approved cement, coarse sand and stone grit as per I.S. 11682 and I.S.456.Seismiceffects and wind load should be taken into consideration as per I.S. 1893 for earthquake resistance and I.S. 875 part-III for wind load on structure and including 1M wide RCC staircase, 1 m wide R.C.C. M25 balcony, M.S. ladder made of 50x50x6 mm angle section and 20mm plain M.S. bars with hand rails of 20mm medium class G.I. pipes, One aluminum ladder inside the tank from top dome to bottom dome, railing with 20mm dia medium class G.I.pipe (in 3 rows) on both sides of stair case,bolcony and top dome, supported on 50x50x6mm M.S. angle section, spaced at intervals not more than 1.5m, Proper ventilator at top dome in circular shape of 1.2 m dia, Water level indicator fabricated with sensor connecting to automation, Lightening conductor as per I.S.S.2309 or its latest amendments of latest electricity rules, consisting of proper elevation rod with 5 or more fork points as prescribed in ISS 2309-1969 and ISS 3013-1966, C.I. manhole of min 60x60cm size with locking arrangement, Supply, fixing, jointing of C.I.D/F Pipes of appropriate size with C.I.D/F specials conforming to IS 8329/2000 as vertical pipes for inlet, outlet, overflow and washout as per latest / relevant I.S. specificationswith all jointing materials for proper completion of work,Supply and Fixing of appropriate size manually operated D/F Sluice Valve / Butter Fly Valves as per ISS 700/1969 or its latest amendments class “A” working pressure 10 Kg/cm2, Construction of bed blocks in 1:2:4 PCC with cement, coarse sand and approved stone grit , Construction of washout / overflow chamber and chambers for sluice / butter fly valves as per departmental type design and drawing, Supply of 200 mm dia PVC pipe as per I.S.-4985/2000 for disposal of water from overflow and washout chamber to suitable point outside the water works compound.Supplyand fixing of 1.8 m hight M.S. Gate in staire case at 2nd fligth as per direction of engineer -in-charge. Painting of all concrete surface and steel pipe works with water based exterior paint of approved make and quality as mentioned in tender documentover one priming coat on new work with two coats, to give an even shade and anticorrosive paints including prepration of surface &supply of all matrials labour T&P etc. required for proper completion of the work. AS PER DIRECTION OF EIC 123 (i)ZONE-5 -400KL Capacity 22 M staging 124 (i)ZONE-6 -550KL Capacity 22 M staging 125 (i)ZONE-7 -350KL Capacity 22 M staging 126 (i)ZONE-8 -300KL Capacity 20 M staging 127 (i)ZONE-9-600KL Capacity 22 M staging 128 Supply of 200mm dia P.V.C. Pipe as per letest /revlent I.S.specification including all taxes and insurance etc.F.O.R. destination for disposal of water from overflow and washout chamber to suitable point outside the water works compound including excavation of trenches.laying of pipe line etc.complete. 129 Repairing & painting of existing Over Head Tank of 100KL, 12 M stagingall releated work completion as per direction of Engineer in charge including supply of all material, labour, T&P etcproper completion of work . 130 Repairing & painting of existing Over Head Tank of 300KL, 16 M stagingall releated work completion as per direction of Engineer in charge including supply of all material, labour, T&P etcproper completion of work . 131 Repairing & painting of existing Over Head Tank of 250KL, 14 M stagingall releated work completion as per direction of Engineer in charge including supply of all material, labour, T&P etcproper completion of work . 132 Repairing & painting of existing Over Head Tank of 350KL, 18 M stagingall releated work completion as per direction of Engineer in charge including supply of all material, labour, T&P etcproper completion of work . 133 Repairing & painting of Existing Staff Quarterin zone-1 Water works campus including supply of all labour, material, T&P etc complete. 134 Construction of water recharging unit with water taping arrangement from roof and ground water recharging unitas perdirected by engineer-in charge including all material labour t&p etc. proper completion of work . 135 SCADA ROOM 136 Excavation in foundation in ordinarysoil (loam,clayorsand)includingliftupto1.50 m& lead up to 50 m,refilling,wateringandramming ofevcavatedearthintothetrenchesorspace betwwen the building and sides of foundation trenches or into the plinth and disposal of surplus earth up to the distance of 50 mfrom the center of the foundation trenches. 137 Concretewith40mmgaugestone ballast,local sand and cementin proportion in 8:4:1infoundation includingsupplyofall material,labourT &Petc.requiredforproper completion of work. 138 Ist. Class brick work in 1:6 cementand local mortar in foundation and plinth including supply of allmaterial,labourT&Petc.requiredforproper completion of work. 139 20 mm thick D.P.C.with cement and approved coarse sand 1:2 including 5% water proofing materialor inproportion as specied by themanufacturesincludingsupplyofall material,labourT &Petc.requiredforproper completion of work. 140 Ist. Class brickwork in 1:6 cementandlocalmortarinsuperstructure including supply of allmaterial,labourT&P etc.required for proper completion of work.Ist. 141 As in item 11.05 above but in 1:4 superstructure includingnecessary cutting and moulding of bricks as required and also including honey comb brick work thickness of wall not to be less than 1/2 brick wall. 142 Supply and fixing of M.S. angle iron chaukhatsof50mmx 50mm x 6mmwith M.S. sheet door shutter including simple moulding straightg work as in chaukhats and also supply of allmaterial,labourT&Petc.requiredforproper completion of work. 143 Fixingofholdfastofdoorsandwindows chaukhats already moulded on chaukhats inP.C.C.1:2:4etc.requiredinallrespectto complete the work. 144 R.C.C. work with cement,coarse sand and 20 mm gauge approved stone ballast in proportion of1:1.50:3insunshedandlintelondoorsand windows excluding supply of reinforcement and its bendingbutincludingitsfixingandbindingthe samewith0.50mmthick binding wire and the costofbinding wire and including necessary centeringandshutteringsupplyofall material,labour T&P etc. required for proper completion of work. 145 LINTAL/BEAM 146 SLAB/CHAJJA 147 Mild steel or iron work in plain work such as R.C.C. or R.B. work (when not included, in over all rates) ,wrought to required shape as necessary incluiding bending for proper completion of thework incluiding supply of steel and.wastage. 148 SupplyandfixingofZ-Sectionsection window framesandShuttersopenableoutsideas per drawinganddesignapprovedbyE/I,hingesof approvedquality,M.S.orC.I.handles,holdfast4 nos of M.S. flat25x5 mm and 150 mm long, pegs ofM.S.30cmlonghaving4holeswithpagester and brackets welded orriveted toframe completeincludingthecostofGlassPanes& includingsupply of all material,labour T&Petc. required for proper completion of work. 149 12 mm thick plaster in 1:6 with cementand coarse sand mortar over brick work minimum thickness not to be less than 10 mm, including supply of all materials, labour, T. & P.etc.Required for proper completion of the work. 150 Sameasitemno 11.15butin proportion1:4withcement andlocal sand mortar over ceiling. 151 25mm thick 1:2:4 plain cement concrete floor and appron with cement coarse sand and 20mm gauge stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio1:5 as specified over and including 75mm thick base concrete consisting of cement local sand and 1st class brick ballast 40mm gauge in the proportion of 1:4:8 and removing any overlapping or mortar at the joints of panels if any and giving them uniform finish including supply of all materials labourand T and P etc. required for proper completion of the work. 152 Same as item no 11.16 but in Apron. 153 Supply and fix 3 mm glass strips in position includingsupplyofallmaterial,labourT&Petc. required for proper completion of work. 154 Paintingorvarnishingnew workornewwoodworkinsmallareaswithone primingcoatandtwocoatofapprovedquality paint or varnish including supply of all material,labourT &Petc.requiredforproper completion of work. 155 Finishing wall with waterproof .Cement paint of approved make and quality over one priming coat on new work with two coats, to give an even shade. Including prepration of surface &supply of all matrials labour T&P etc. required for proper completion of the work. 156 115mmstringordripcoarseofIst.Class brick in 1:6 cement and local sand mortar including plastering, cutting drip notch as required andincludingsupplyofallmaterial,labourT&P etc. required for proper completion of work. 157 Sandfillinginplinthin including supply of all material,labour T & P etc.requiredfor proper completion of work. 158 Supplyandfixingoffanhooksboxtype includingsupply of all material,labour T&Petc. complete. 159 Provisionforinternalelectrificationincludingsupply of all material,labour,T&P etc. complete. 160 Provision for water supplyand sanitaryworks including supply of all material,labour,T&Petc. complete 161 E/M WORKS 162 ZONE-I 163 CONSTRUCTION OF TUBEWELL 164 Transportation of Rig m/c and its T&P including Erection and Dismantling of Rig m/c. 165 Transportation of 250 psi compressor including Loading , unloading, Erection, Dismantling & labour etc complete in all respect . 166 O.P.Unit 167 Transportation of 2/3 cusec op unit including Loading , unloading, Erection, Dismantling & labour etc complete in all respect . 168 Drilling of Bore 169 Logging of bore hole by departmental/approved electric logger. 170 Drilling of 500mm dia bore from G.L. to 60m BGL. 171 Drilling of 450mm dia bore from 61m BGL to 100m BGL. 172 Drilling of 450mm dia bore from 100m BGL to165m BGL. 173 TUBEWELL ASSEMBLY 174 200mm dia size MSERW housing pipe 7.1mm thick including with 1 no 200 X 150mm dia M.S reducer 16mm thick, 1 noM.S. well cap 12mm thick , 10 no M.S. ring 100X12mm thick, M.S. S/I clamp ,T.W. Support (I Section) etc comp in all respect . 175 150mm dia MSERW 7.1mm thick plain /slotted pipe including with 20 no M.S ring 100X12mmthick , 1 noM.S. bail plug , 08 no center guide etc comp in all respect. 176 LOWERING OF T/W ASSEMBLY 177 Lowering of 200mm X 150mm dia tube well assembly in bore hole and shrouding of pea gravel between annular space ofbore hole and T.W. assembly from G.L. to 150m BGL. 178 Lowering of 200mm dia MSERW 7.1mm thick plain pipe from GL to 54m BGL. 179 Lowering of 150mm dia MSERW plain/slotted pipe 7.1mm thick from 55m BGL to 100m BGL. 180 Lowering of 150mm dia MSERW plain/slotted pipe 7.1mm thick from 100m BGL to 150m BGL. 181 PEA-GRAVEL 182 Supply of 1.6 - 4.8 mm size Lal Kuwan Quarry Pea-Gravel Duly Washed,Screened and properly Stacked at Site. 183 DEVELOPMENT OF TUBE WELL 184 Development of tube well by 250 PSI air compressor 185 Development of tube well by 250 PSI air compressor 186 Development of tube well by 3 cusec O.P. Unit 187 Development of tube well by 3 cusec O.P. Unit. 188 TEST 189 Chemical and bacteriological test. 190 Pumping plant and Other instrumentation work 191 150 LPM, 40 m head 2900rpm,03 H.P. submersible clear water pumping plant suitable to operate on 415+ %5 volt, 50 Hz, 3 phase A.C. supply (as per IS 8034-1989) 192 SITC of Main piping & Valves (80 mm size) with 24 mtr. Column pipe, Electronic type Chlorinating plant Power wiring, earthing, Painting , Tools sets, wiring of pump house (internal & External) Chain Pulley block and gauges complete in all respect with allrequired material, T&P labour. 193 SITC of of 10 KVA Servo Voltage stabilizer or as per requirement (Input Voltage 230V±450V) to Output Voltage 415±1% As per IS 9815-1994. 194 Soft Stater with RS485Port- 400 V Class, 195 CE/UL Certified Intelligent Smart Energy Meter 196 Motor operated Actuator for without Sluice Valve of size upto 150 m 197 Electro magnetic flow meter upto150mm. 198 CE/UL Certified Hydrostatic type sub soil Water Level Transmiter for Tubewell 199 CE/UL Certified Pressure Transmiter . 200 Suitable capacity of booster pump with all accessories. Increase terminal Head upto 12 Meter. 201 SCADAAUTOMATION OF (NEW TUBEWELL and OLD Tubewell) 202 SCADAAUTOMATION ITEMS 203 CE & UL Certified PLC/RTU in IP 54 enclosure suitable to Communicate with GSM based modemunit with CPU & Power supply with analog & digital parameter & fetures as specified for each tubewell/OHT & stand alone OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations as specified also enabled with UPS for power backup upto 2Hrs & automatic on/off switching arrangement. 204 G.S.M/G.P.R.S based wireless communication 4G Modem for RTU/PLC Capable to transfer & gather data from remote sites to control stations all accessories included with signal enhancer antenna made for pumping plant internet charges as specified in tender technical specification. 205 CE/UL certified 7 HMI touch screen suitable to communicate with PLC/RTU for local display and control of process parameters. 206 CE/UL Certified Surge protector for control panel 207 Complete cabling for all equipments at pump house 208 Control panel with IP 54 protection, industrial grade for all equipment (Separate for control (24V) and power equipment). 209 Installation, commissioing & testing for one tubewell 210 Trial Run for 3 month period for one tubewell 211 Instrumentation Item for(OLD) Existing Tubewell 212 Motor operated Actuator for without Sluice Valve of size upto 150 m 213 Electro magnetic flow meter upto150mm. 214 CE/UL Certified Hydrostatic type sub soil Water Level Transmiter for Tubewell 215 CE/UL Certified Pressure Transmiter . 216 CE / UL certified Intelligent smart energy meter 217 Soft Stater with RS485Port- 400 V Class, 218 SITC of of 7.5 KVA Servo Voltage stabilizer or as per requirement (Input Voltage 230V±450V) to Output Voltage 415±1% As per IS 9815-1994. 219 Master control station (MCS) 220 SCADA DISPLAY 221 CE/UL & BIS Certified industrial gradeLED MONITOR with latest configuration as per specification. 222 (i) 65LED MONITOR With latest configuration 223 CE/UL/&BIS certified industrial grade large video screen(LVS)with latest configuration of LED type LFD ad per specificatio, MATRIX of 55 each panel. 224 (I)2x2 Matrix (4 panel) 225 Video wall media player of same OEM. 226 Desktop/PC with i5/i7 prosessor for as per spec mentioned in technical bid document. 227 CE/UL Cerfified 5 KVA UPS with batteries as per spec mentioned in technical bid document. 228 Full development version of reqrired TAGS SCADA Software with counstomization of software for MCS as per requirement as per spec mentioned in technical bid documents. 229 CE/UL certified master control room PLC with redundant CPU & power supply at MCS in IP54 enclouser as spec mentioned in technical bid documents. 230 EC/UL certified Field gateway agent for transfering data from MCS to Central control room. 231 GSM based wireless/Broadband/Equipment communication system for PLC capable to tranfer & received data & gather data from remote sited to control station, All accessoried included signal enhancer antenna along with running expences till DLP. 232 CE/UL Certified Firewall for network protection. 233 SURGE PROTECTOR FOR ETHERNET communication protection. 234 CE/UL certified industrial grade Ethernedt Switch 235 Mobile App Facility system architecture (industries internet baded & viewed through mobile apps for increased local & Remote Visibility). 236 Canon/HP or eqrivalent Laser Printe 1018 or equivement. 237 Security Surveillance IP camera with recorded (optional). 238 Installation, Commissioning & testing inclidung required funiture, A/c etc. 239 Trial run for 3 month period. 240 Automation of OHT 241 Motor operatedActuator without Sluce valve 160mm Size 242 Electromagnetic Flowmeter of 160mm Size 243 CE/UL Certified Radar type level transmittor for OHT 244 Three Month Trial & Run for 03 Month 245 ZONE-II 246 Transportation 247 Rig Machine 248 Transportation of Rig m/c and its T&P including Erection and Dismantling of Rig m/c. 249 Transportation of 250 psi compressor including Loading , unloading, Erection, Dismantling & labour etc complete in all respect . 250 O.P.Unit 251 Transportation of 2/3 cusec op unit including Loading , unloading, Erection, Dismantling & labour etc complete in all respect . 252 Drilling of Bore 253 Logging of bore hole by departmental/approved electric logger. 254 Drilling of 500mm dia bore from G.L. to 60m BGL. 255 Drilling of 450mm dia bore from 61m BGL to 100m BGL. 256 Drilling of 450mm dia bore from 100m BGL to165m BGL. 257 TUBEWELL ASSEMBLY 258 200mm dia size MSERW housing pipe 7.1mm thick including with 1 no 200 X 150mm dia M.S reducer 16mm thick, 1 noM.S. well cap 12mm thick , 10 no M.S. ring 100X12mm thick, M.S. S/I clamp ,T.W. Support (I Section) etc comp in all respect . 259 150mm dia MSERW 7.1mm thick plain /slotted pipe including with 20 no M.S ring 100X12mmthick , 1 noM.S. bail plug , 08 no center guide etc comp in all respect. 260 LOWERING OF T/W ASSEMBLY 261 Lowering of 200mm X 150mm dia tube well assembly in bore hole and shrouding of pea gravel between annular space ofbore hole and T.W. assembly from G.L. to 150m BGL. 262 Lowering of 200mm dia MSERW 7.1mm thick plain pipe from GL to 54m BGL. 263 Lowering of 150mm dia MSERW plain/slotted pipe 7.1mm thick from 55m BGL to 100m BGL. 264 Lowering of 150mm dia MSERW plain/slotted pipe 7.1mm thick from 100m BGL to 150m BGL. 265 PEA-GRAVEL 266 Supply of 1.6 - 4.8 mm size Lal Kuwan Quarry Pea-Gravel Duly Washed,Screened and properly Stacked at Site. 267 DEVELOPMENT OF TUBE WELL 268 Development of tube well by 250 PSI air compressor 269 Development of tube well by 250 PSI air compressor 270 Development of tube well by 3 cusec O.P. Unit 271 Development of tube well by 3 cusec O.P. Unit. 272 TEST 273 Chemical and bacteriological test. 274 Pumping plant and Other instrumentation work 275 SITC of 350 LPM, 44 m head 7.5 H.P. submersible pump set with 24 meter column pipe assembly, NRV, CI D/F Bend 90°, CI A/F Tee, D/F pipe (1.5m long 2 Nos and 1.0m long 1 No), Earthing, Painting Toolset, Power wiring of pump house internal and external, Chainpully block, and all Pumping plant accessories with nut bolts and rubber packing etc. Rates of items required for SCADA Automation of pumping plant are not included in these rates. 276 SITC of Automatic chlorination system SCADA Compatable chlorinating system. 277 Misc item such as protection ring, MCCB, Transformer oil, electric resistance, rubber sheet, 25 sqmm ormad cable and construction of canopyas per site requirement for protection of electronic device and safety purpose and nut bolts, rubber packing for extra/spare column pipe. 278 Supply & Erection of Servo Stabilizer of 15 KVA 279 Soft Stater with RS485Port- 400 V Class, 280 CE/UL Certified Intelligent Smart Energy Meter 281 Motor operated Actuator for with Sluice Valve of size upto 150 m 282 Electro magnetic flow meter upto150mm. 283 CE/UL Certified Hydrostatic type sub soil Water Level Transmiter for Tubewell 284 CE/UL Certified Pressure Transmiter . 285 SCADAAUTOMATION OF (NEW TUBEWELL and OLD Tubewell) 286 SCADAAUTOMATION ITEMS 287 CE & UL Certified PLC/RTU in IP 54 enclosure suitable to Communicate with GSM based modemunit with CPU & Power supply with analog & digital parameter & fetures as specified for each tubewell/OHT & stand alone OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations as specified also enabled with UPS for power backup upto 2Hrs & automatic on/off switching arrangement. 288 G.S.M/G.P.R.S based wireless communication 4G Modem for RTU/PLC Capable to transfer & gather data from remote sites to control stations all accessories included with signal enhancer antenna made for pumping plant internet charges as specified in tender technical specification. 289 CE/UL certified 7 HMI touch screen suitable to communicate with PLC/RTU for local display and control of process parameters. 290 CE/UL Certified Surge protector for control panel 291 Complete cabling for all equipments at pump house 292 Control panel with IP 54 protection, industrial grade for all equipment (Separate for control (24V) and power equipment). 293 Installation, commissioing & testing for one tubewell 294 Trial Run for 3 month period for one tubewell 295 Instrumentation Item for(OLD) Existing Tubewell 296 Motor operated Actuator for without Sluice Valve of size upto 150 m 297 Electro magnetic flow meter upto150mm. 298 CE/UL Certified Hydrostatic type sub soil Water Level Transmiter for Tubewell 299 CE/UL Certified Pressure Transmiter . 300 Soft Stater with RS485Port- 400 V Class, 301 SITC of of 15 KVA Servo Voltage stabilizer or as per requirement (Input Voltage 230V±450V) to Output Voltage 415±1% As per IS 9815-1994. 302 Automation of OHT 303 Motor operatedActuator without Sluce valve 200mm Size 304 Electromagnetic Flowmeter of 200mm Size 305 CE/UL Certified Radar type level transmittor for OHT 306 Three Month Trial & Run for 03 Month 307 ZONE-III 308 Transportation 309 Rig Machine 310 Transportation of Rig m/c and its T&P including Erection and Dismantling of Rig m/c. 311 Transportation of 250 psi compressor including Loading , unloading, Erection, Dismantling & labour etc complete in all respect . 312 O.P.Unit 313 Transportation of 2/3 cusec op unit including Loading , unloading, Erection, Dismantling & labour etc complete in all respect . 314 Drilling of Bore 315 Logging of bore hole by departmental/approved electric logger. 316 Drilling of 500mm dia bore from G.L. to 60m BGL. 317 Drilling of 450mm dia bore from 61m BGL to 100m BGL. 318 Drilling of 450mm dia bore from 100m BGL to165m BGL. 319 TUBEWELL ASSEMBLY 320 200mm dia size MSERW housing pipe 7.1mm thick including with 1 no 200 X 150mm dia M.S reducer 16mm thick, 1 noM.S. well cap 12mm thick , 10 no M.S. ring 100X12mm thick, M.S. S/I clamp ,T.W. Support (I Section) etc comp in all respect . 321 150mm dia MSERW 7.1mm thick plain /slotted pipe including with 20 no M.S ring 100X12mmthick , 1 noM.S. bail plug , 08 no center guide etc comp in all respect. 322 LOWERING OF T/W ASSEMBLY 323 Lowering of 200mm X 150mm dia tube well assembly in bore hole and shrouding of pea gravel between annular space ofbore hole and T.W. assembly from G.L. to 150m BGL. 324 Lowering of 200mm dia MSERW 7.1mm thick plain pipe from GL to 54m BGL. 325 Lowering of 150mm dia MSERW plain/slotted pipe 7.1mm thick from 55m BGL to 100m BGL. 326 Lowering of 150mm dia MSERW plain/slotted pipe 7.1mm thick from 100m BGL to 150m BGL. 327 PEA-GRAVEL 328 Supply of 1.6 - 4.8 mm size Lal Kuwan Quarry Pea-Gravel Duly Washed,Screened and properly Stacked at Site. 329 DEVELOPMENT OF TUBE WELL 330 Development of tube well by 250 PSI air compressor 331 Development of tube well by 250 PSI air compressor 332 Development of tube well by 3 cusec O.P. Unit 333 Development of tube well by 3 cusec O.P. Unit. 334 TEST 335 Chemical and bacteriological test. 336 Pumping plant and Other instrumentation work 337 SITC of 350 LPM, 42 m head 7.5 H.P. submersible pump set with 24 meter column pipe assembly, NRV, CI D/F Bend 90°, CI A/F Tee, D/F pipe (1.5m long 2 Nos and 1.0m long 1 No), Earthing, Painting Toolset, Power wiring of pump house internal and external, Chainpully block, and all Pumping plant accessories with nut bolts and rubber packing etc. Rates of items required for SCADA Automation of pumping plant are not included in these rates. 338 SITC of Automatic chlorination system SCADA Compatable chlorinating system. 339 Misc item such as protection ring, MCCB, Transformer oil, electric resistance, rubber sheet, 25 sqmm ormad cable and construction of canopyas per site requirement for protection of electronic device and safety purpose and nut bolts, rubber packing for extra/spare column pipe. 340 Supply & Erection of Servo Stabilizer of 15 KVA 341 Soft Stater with RS485Port- 400 V Class, 342 CE/UL Certified Intelligent Smart Energy Meter 343 Motor operated Actuator for with Sluice Valve of size upto 150 m 344 Electro magnetic flow meter upto150mm. 345 CE/UL Certified Hydrostatic type sub soil Water Level Transmiter for Tubewell 346 CE/UL Certified Pressure Transmiter . 347 Suitable capacity of booster pump with all accessories. Increase terminal Head upto 12 Meter. 348 SCADAAUTOMATION OF (NEW TUBEWELL and OLD Tubewell) 349 SCADAAUTOMATION ITEMS 350 CE & UL Certified PLC/RTU in IP 54 enclosure suitable to Communicate with GSM based modemunit with CPU & Power supply with analog & digital parameter & fetures as specified for each tubewell/OHT & stand alone OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations as specified also enabled with UPS for power backup upto 2Hrs & automatic on/off switching arrangement. 351 G.S.M/G.P.R.S based wireless communication 4G Modem for RTU/PLC Capable to transfer & gather data from remote sites to control stations all accessories included with signal enhancer antenna made for pumping plant internet charges as specified in tender technical specification. 352 CE/UL certified 7 HMI touch screen suitable to communicate with PLC/RTU for local display and control of process parameters. 353 CE/UL Certified Surge protector for control panel 354 Complete cabling for all equipments at pump house 355 Control panel with IP 54 protection, industrial grade for all equipment (Separate for control (24V) and power equipment). 356 Installation, commissioing & testing for one tubewell 357 Trial Run for 3 month period for one tubewell 358 Instrumentation Item for(OLD) Existing Tubewell 359 Motor operated Actuator for without Sluice Valve of size upto 150 m 360 Electro magnetic flow meter upto150mm. 361 CE/UL Certified Hydrostatic type sub soil Water Level Transmiter for Tubewell 362 CE/UL Certified Pressure Transmiter . 363 Soft Stater with RS485Port- 400 V Class, 364 SITC of of 15 KVA Servo Voltage stabilizer or as per requirement (Input Voltage 230V±450V) to Output Voltage 415±1% As per IS 9815-1994. 365 Automation of OHT 366 Motor operatedActuator without Sluce valve 200mm Size 367 Electromagnetic Flowmeter of 200mm Size 368 CE/UL Certified Radar type level transmittor for OHT 369 Three Month Trial & Run for 03 Month 370 ZONE-IV 371 Transportation 372 Rig Machine 373 Transportation of Rig m/c and its T&P including Erection and Dismantling of Rig m/c. 374 Transportation of 250 psi compressor including Loading , unloading, Erection, Dismantling & labour etc complete in all respect . 375 O.P.Unit 376 Transportation of 2/3 cusec op unit including Loading , unloading, Erection, Dismantling & labour etc complete in all respect . 377 Drilling of Bore 378 Logging of bore hole by departmental/approved electric logger. 379 Drilling of 500mm dia bore from G.L. to 60m BGL. 380 Drilling of 450mm dia bore from 61m BGL to 100m BGL. 381 Drilling of 450mm dia bore from 100m BGL to165m BGL. 382 TUBEWELL ASSEMBLY 383 200mm dia size MSERW housing pipe 7.1mm thick including with 1 no 200 X 150mm dia M.S reducer 16mm thick, 1 noM.S. well cap 12mm thick , 10 no M.S. ring 100X12mm thick, M.S. S/I clamp ,T.W. Support (I Section) etc comp in all respect . 384 150mm dia MSERW 7.1mm thick plain /slotted pipe including with 20 no M.S ring 100X12mmthick , 1 noM.S. bail plug , 08 no center guide etc comp in all respect. 385 LOWERING OF T/W ASSEMBLY 386 Lowering of 200mm X 150mm dia tube well assembly in bore hole and shrouding of pea gravel between annular space ofbore hole and T.W. assembly from G.L. to 150m BGL. 387 Lowering of 200mm dia MSERW 7.1mm thick plain pipe from GL to 54m BGL. 388 Lowering of 150mm dia MSERW plain/slotted pipe 7.1mm thick from 55m BGL to 100m BGL. 389 Lowering of 150mm dia MSERW plain/slotted pipe 7.1mm thick from 100m BGL to 150m BGL. 390 PEA-GRAVEL 391 Supply of 1.6 - 4.8 mm size Lal Kuwan Quarry Pea-Gravel Duly Washed,Screened and properly Stacked at Site. 392 DEVELOPMENT OF TUBE WELL 393 Development of tube well by 250 PSI air compressor 394 Development of tube well by 250 PSI air compressor 395 Development of tube well by 3 cusec O.P. Unit 396 Development of tube well by 3 cusec O.P. Unit. 397 TEST 398 Chemical and bacteriological test. 399 Pumping plant and Other instrumentation work 400 SITC of 400 LPM, 46 m head 10 H.P. submersible pump set with 24 meter column pipe assembly, NRV, CI D/F Bend 90°, CI A/F Tee, D/F pipe (1.5m long 2 Nos and 1.0m long 1 No), Earthing, Painting Toolset, Power wiring of pump house internal and external, Chainpully block, and all Pumping plant accessories with nut bolts and rubber packing etc. Rates of items required for SCADA Automation of pumping plant are not included in these rates. 401 SITC of Automatic chlorination system SCADA Compatable chlorinating system. 402 Misc item such as protection ring, MCCB, Transformer oil, electric resistance, rubber sheet, 25 sqmm ormad cable and construction of canopyas per site requirement for protection of electronic device and safety purpose and nut bolts, rubber packing for extra/spare column pipe. 403 Supply & Erection of Servo Stabilizer of 15 KVA 404 Soft Stater with RS485Port- 400 V Class, 405 CE/UL Certified Intelligent Smart Energy Meter 406 Motor operated Actuator for with Sluice Valve of size upto 150 m 407 Electro magnetic flow meter upto150mm. 408 CE/UL Certified Hydrostatic type sub soil Water Level Transmiter for Tubewell 409 CE/UL Certified Pressure Transmiter . 410 SCADAAUTOMATION OF (NEW TUBEWELL and OLD Tubewell) 411 SCADAAUTOMATION ITEMS 412 CE & UL Certified PLC/RTU in IP 54 enclosure suitable to Communicate with GSM based modemunit with CPU & Power supply with analog & digital parameter & fetures as specified for each tubewell/OHT & stand alone OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations as specified also enabled with UPS for power backup upto 2Hrs & automatic on/off switching arrangement. 413 G.S.M/G.P.R.S based wireless communication 4G Modem for RTU/PLC Capable to transfer & gather data from remote sites to control stations all accessories included with signal enhancer antenna made for pumping plant internet charges as specified in tender technical specification. 414 CE/UL certified 7 HMI touch screen suitable to communicate with PLC/RTU for local display and control of process parameters. 415 CE/UL Certified Surge protector for control panel 416 Complete cabling for all equipments at pump house 417 Control panel with IP 54 protection, industrial grade for all equipment (Separate for control (24V) and power equipment). 418 Installation, commissioing & testing for one tubewell 419 Trial Run for 3 month period for one tubewell 420 Instrumentation Item for(OLD) Existing Tubewell 421 Motor operated Actuator for without Sluice Valve of size upto 150 m 422 Electro magnetic flow meter upto150mm. 423 CE/UL Certified Hydrostatic type sub soil Water Level Transmiter for Tubewell 424 CE/UL Certified Pressure Transmiter . 425 Soft Stater with RS485Port- 400 V Class, 426 SITC of of 20 KVA Servo Voltage stabilizer or as per requirement (Input Voltage 230V±450V) to Output Voltage 415±1% As per IS 9815-1994. 427 Automation of OHT 428 Motor operatedActuator without Sluce valve 250mm Size 429 Electromagnetic Flowmeter of 250mm Size 430 CE/UL Certified Radar type level transmittor for OHT 431 Three Month Trial & Run for 03 Month 432 ZONE-V 433 Transportation 434 Rig Machine 435 Transportation of Rig m/c and its T&P including Erection and Dismantling of Rig m/c. 436 Transportation of 250 psi compressor including Loading , unloading, Erection, Dismantling & labour etc complete in all respect . 437 O.P.Unit 438 Transportation of 2/3 cusec op unit including Loading , unloading, Erection, Dismantling & labour etc complete in all respect . 439 Drilling of Bore 440 Logging of bore hole by departmental/approved electric logger. 441 Drilling of 500mm dia bore from G.L. to 60m BGL. 442 Drilling of 450mm dia bore from 61m BGL to 100m BGL. 443 Drilling of 450mm dia bore from 100m BGL to165m BGL. 444 TUBEWELL ASSEMBLY 445 200mm dia size MSERW housing pipe 7.1mm thick including with 1 no 200 X 150mm dia M.S reducer 16mm thick, 1 noM.S. well cap 12mm thick , 10 no M.S. ring 100X12mm thick, M.S. S/I clamp ,T.W. Support (I Section) etc comp in all respect . 446 150mm dia MSERW 7.1mm thick plain /slotted pipe including with 20 no M.S ring 100X12mmthick , 1 noM.S. bail plug , 08 no center guide etc comp in all respect. 447 LOWERING OF T/W ASSEMBLY 448 Lowering of 200mm X 150mm dia tube well assembly in bore hole and shrouding of pea gravel between annular space ofbore hole and T.W. assembly from G.L. to 150m BGL. 449 Lowering of 200mm dia MSERW 7.1mm thick plain pipe from GL to 54m BGL. 450 Lowering of 150mm dia MSERW plain/slotted pipe 7.1mm thick from 55m BGL to 100m BGL. 451 Lowering of 150mm dia MSERW plain/slotted pipe 7.1mm thick from 100m BGL to 150m BGL. 452 PEA-GRAVEL 453 Supply of 1.6 - 4.8 mm size Lal Kuwan Quarry Pea-Gravel Duly Washed,Screened and properly Stacked at Site. 454 DEVELOPMENT OF TUBE WELL 455 Development of tube well by 250 PSI air compressor 456 Development of tube well by 250 PSI air compressor 457 Development of tube well by 3 cusec O.P. Unit 458 Development of tube well by 3 cusec O.P. Unit. 459 TEST 460 Chemical and bacteriological test. 461 Pumping plant and Other instrumentation work 462 SITC of 450 LPM, 50 m head 10 H.P. submersible pump set with 24 meter column pipe assembly, NRV, CI D/F Bend 90°, CI A/F Tee, D/F pipe (1.5m long 2 Nos and 1.0m long 1 No), Earthing, Painting Toolset, Power wiring of pump house internal and external, Chainpully block, and all Pumping plant accessories with nut bolts and rubber packing etc. Rates of items required for SCADA Automation of pumping plant are not included in these rates. 463 SITC of Automatic chlorination system SCADA Compatable chlorinating system. 464 Misc item such as protection ring, MCCB, Transformer oil, electric resistance, rubber sheet, 25 sqmm ormad cable and construction of canopyas per site requirement for protection of electronic device and safety purpose and nut bolts, rubber packing for extra/spare column pipe. 465 Supply & Erection of Servo Stabilizer of 20 KVA 466 Soft Stater with RS485Port- 400 V Class, 467 CE/UL Certified Intelligent Smart Energy Meter 468 Motor operated Actuator for with Sluice Valve of size upto 150 m 469 Electro magnetic flow meter upto150mm. 470 CE/UL Certified Hydrostatic type sub soil Water Level Transmiter for Tubewell 471 CE/UL Certified Pressure Transmiter . 472 SCADAAUTOMATION OF NEW TUBEWELL 473 SCADAAUTOMATION ITEMS 474 CE & UL Certified PLC/RTU in IP 54 enclosure suitable to Communicate with GSM based modemunit with CPU & Power supply with analog & digital parameter & fetures as specified for each tubewell/OHT & stand alone OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations as specified also enabled with UPS for power backup upto 2Hrs & automatic on/off switching arrangement. 475 G.S.M/G.P.R.S based wireless communication 4G Modem for RTU/PLC Capable to transfer & gather data from remote sites to control stations all accessories included with signal enhancer antenna made for pumping plant internet charges as specified in tender technical specification. 476 CE/UL certified 7 HMI touch screen suitable to communicate with PLC/RTU for local display and control of process parameters. 477 CE/UL Certified Surge protector for control panel 478 Complete cabling for all equipments at pump house 479 Control panel with IP 54 protection, industrial grade for all equipment (Separate for control (24V) and power equipment). 480 Installation, commissioing & testing for one tubewell 481 Trial Run for 3 month period for one tubewell 482 Automation of OHT 483 Motor operatedActuator without Sluce valve 200mm Size 484 Electromagnetic Flowmeter of 200mm Size 485 CE/UL Certified Radar type level transmittor for OHT 486 Three Month Trial & Run for 03 Month 487 ZONE-VI 488 Transportation 489 Rig Machine 490 Transportation of Rig m/c and its T&P including Erection and Dismantling of Rig m/c. 491 Transportation of 250 psi compressor including Loading , unloading, Erection, Dismantling & labour etc complete in all respect . 492 O.P.Unit 493 Transportation of 2/3 cusec op unit including Loading , unloading, Erection, Dismantling & labour etc complete in all respect . 494 Drilling of Bore 495 Logging of bore hole by departmental/approved electric logger. 496 Drilling of 500mm dia bore from G.L. to 60m BGL. 497 Drilling of 450mm dia bore from 61m BGL to 100m BGL. 498 Drilling of 450mm dia bore from 100m BGL to165m BGL. 499 TUBEWELL ASSEMBLY 500 300mm dia size MSERW housing pipe 7.1mm thick including with 1 no 300 X 150mm dia M.S reducer 16mm thick, 1 noM.S. well cap 12mm thick , 10 no M.S. ring 100X12mm thick, M.S. S/I clamp ,T.W. Support (I Section) etc comp in all respect . 501 150mm dia MSERW 7.1mm thick plain /slotted pipe including with 20 no M.S ring 100X12mmthick , 1 noM.S. bail plug , 08 no center guide etc comp in all respect. 502 LOWERING OF T/W ASSEMBLY 503 Lowering of 300mm X 150mm dia tube well assembly in bore hole and shrouding of pea gravel between annular space ofbore hole and T.W. assembly from G.L. to 150m BGL. 504 Lowering of 300mm dia MSERW 7.1mm thick plain pipe from GL to 54m BGL. 505 Lowering of 150mm dia MSERW plain/slotted pipe 7.1mm thick from 55m BGL to 100m BGL. 506 Lowering of 150mm dia MSERW plain/slotted pipe 7.1mm thick from 100m BGL to 150m BGL. 507 PEA-GRAVEL 508 Supply of 1.6 - 4.8 mm size Lal Kuwan Quarry Pea-Gravel Duly Washed,Screened and properly Stacked at Site. 509 DEVELOPMENT OF TUBE WELL 510 Development of tube well by 250 PSI air compressor 511 Development of tube well by 250 PSI air compressor 512 Development of tube well by 3 cusec O.P. Unit 513 Development of tube well by 3 cusec O.P. Unit. 514 TEST 515 Chemical and bacteriological test. 516 Pumping plant and Other instrumentation work 517 SITC of 650 LPM, 50 m head 15 H.P. submersible pump set with 24 meter column pipe assembly, NRV, CI D/F Bend 90°, CI A/F Tee, D/F pipe (1.5m long 2 Nos and 1.0m long 1 No), Earthing, Painting Toolset, Power wiring of pump house internal and external, Chainpully block, and all Pumping plant accessories with nut bolts and rubber packing etc. Rates of items required for SCADA Automation of pumping plant are not included in these rates. 518 SITC of Automatic chlorination system SCADA Compatable chlorinating system. 519 Misc item such as protection ring, MCCB, Transformer oil, electric resistance, rubber sheet, 25 sqmm ormad cable and construction of canopyas per site requirement for protection of electronic device and safety purpose and nut bolts, rubber packing for extra/spare column pipe. 520 Supply & Erection of Servo Stabilizer of 25 KVA 521 CE/UL Certified Intelligent Smart Energy Meter 522 Soft Stater with RS485Port- 400 V Class, 523 Motor operated Actuator for without Sluice Valve of size upto 150 m 524 Electro magnetic flow meter upto150mm. 525 CE/UL Certified Hydrostatic type sub soil Water Level Transmiter for Tubewell 526 CE/UL Certified Pressure Transmiter . 527 SCADAAUTOMATION OF NEW TUBEWELL 528 SCADAAUTOMATION ITEMS 529 CE & UL Certified PLC/RTU in IP 54 enclosure suitable to Communicate with GSM based modemunit with CPU & Power supply with analog & digital parameter & fetures as specified for each tubewell/OHT & stand alone OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations as specified also enabled with UPS for power backup upto 2Hrs & automatic on/off switching arrangement. 530 G.S.M/G.P.R.S based wireless communication 4G Modem for RTU/PLC Capable to transfer & gather data from remote sites to control stations all accessories included with signal enhancer antenna made for pumping plant internet charges as specified in tender technical specification. 531 CE/UL certified 7 HMI touch screen suitable to communicate with PLC/RTU for local display and control of process parameters. 532 CE/UL Certified Surge protector for control panel 533 Complete cabling for all equipments at pump house 534 Control panel with IP 54 protection, industrial grade for all equipment (Separate for control (24V) and power equipment). 535 Installation, commissioing & testing for one tubewell 536 Trial Run for 3 month period for one tubewell 537 Automation of OHT 538 Motor operatedActuator without Sluce valve 250mm Size 539 Electromagnetic Flowmeter of 250mm Size 540 CE/UL Certified Radar type level transmittor for OHT 541 Three Month Trial & Run for 03 Month 542 ZONE-VII 543 Transportation 544 Rig Machine 545 Transportation of Rig m/c and its T&P including Erection and Dismantling of Rig m/c. 546 Transportation of 250 psi compressor including Loading , unloading, Erection, Dismantling & labour etc complete in all respect . 547 O.P.Unit 548 Transportation of 2/3 cusec op unit including Loading , unloading, Erection, Dismantling & labour etc complete in all respect . 549 Drilling of Bore 550 Logging of bore hole by departmental/approved electric logger. 551 Drilling of 500mm dia bore from G.L. to 60m BGL. 552 Drilling of 450mm dia bore from 61m BGL to 100m BGL. 553 Drilling of 450mm dia bore from 100m BGL to165m BGL. 554 TUBEWELL ASSEMBLY 555 200mm dia size MSERW housing pipe 7.1mm thick including with 1 no 200 X 150mm dia M.S reducer 16mm thick, 1 noM.S. well cap 12mm thick , 10 no M.S. ring 100X12mm thick, M.S. S/I clamp ,T.W. Support (I Section) etc comp in all respect . 556 150mm dia MSERW 7.1mm thick plain /slotted pipe including with 20 no M.S ring 100X12mmthick , 1 noM.S. bail plug , 08 no center guide etc comp in all respect. 557 LOWERING OF T/W ASSEMBLY 558 Lowering of 200mm X 150mm dia tube well assembly in bore hole and shrouding of pea gravel between annular space ofbore hole and T.W. assembly from G.L. to 150m BGL. 559 Lowering of 200mm dia MSERW 7.1mm thick plain pipe from GL to 54m BGL. 560 Lowering of 150mm dia MSERW plain/slotted pipe 7.1mm thick from 55m BGL to 100m BGL. 561 Lowering of 150mm dia MSERW plain/slotted pipe 7.1mm thick from 100m BGL to 150m BGL. 562 PEA-GRAVEL 563 Supply of 1.6 - 4.8 mm size Lal Kuwan Quarry Pea-Gravel Duly Washed,Screened and properly Stacked at Site. 564 DEVELOPMENT OF TUBE WELL 565 Development of tube well by 250 PSI air compressor 566 Development of tube well by 250 PSI air compressor 567 Development of tube well by 3 cusec O.P. Unit 568 Development of tube well by 3 cusec O.P. Unit. 569 TEST 570 Chemical and bacteriological test. 571 Pumping plant and Other instrumentation work 572 SITC of 400 LPM, 50 m head 10 H.P. submersible pump set with 24 meter column pipe assembly, NRV, CI D/F Bend 90°, CI A/F Tee, D/F pipe (1.5m long 2 Nos and 1.0m long 1 No), Earthing, Painting Toolset, Power wiring of pump house internal and external, Chainpully block, and all Pumping plant accessories with nut bolts and rubber packing etc. Rates of items required for SCADA Automation of pumping plant are not included in these rates. 573 SITC of Automatic chlorination system SCADA Compatable chlorinating system. 574 Misc item such as protection ring, MCCB, Transformer oil, electric resistance, rubber sheet, 25 sqmm ormad cable and construction of canopyas per site requirement for protection of electronic device and safety purpose and nut bolts, rubber packing for extra/spare column pipe. 575 Supply & Erection of Servo Stabilizer of 20 KVA 576 CE/UL Certified Intelligent Smart Energy Meter 577 Soft Stater with RS485Port- 400 V Class, 578 Motor operated Actuator for with Sluice Valve of size upto 150 m 579 Electro magnetic flow meter upto150mm. 580 CE/UL Certified Hydrostatic type sub soil Water Level Transmiter for Tubewell 581 CE/UL Certified Pressure Transmiter . 582 SCADAAUTOMATION OF NEW TUBEWELL 583 SCADAAUTOMATION ITEMS 584 CE & UL Certified PLC/RTU in IP 54 enclosure suitable to Communicate with GSM based modemunit with CPU & Power supply with analog & digital parameter & fetures as specified for each tubewell/OHT & stand alone OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations as specified also enabled with UPS for power backup upto 2Hrs & automatic on/off switching arrangement. 585 G.S.M/G.P.R.S based wireless communication 4G Modem for RTU/PLC Capable to transfer & gather data from remote sites to control stations all accessories included with signal enhancer antenna made for pumping plant internet charges as specified in tender technical specification. 586 CE/UL certified 7 HMI touch screen suitable to communicate with PLC/RTU for local display and control of process parameters. 587 CE/UL Certified Surge protector for control panel 588 Complete cabling for all equipments at pump house 589 Control panel with IP 54 protection, industrial grade for all equipment (Separate for control (24V) and power equipment). 590 Installation, commissioing & testing for one tubewell 591 Trial Run for 3 month period for one tubewell 592 Automation of OHT 593 Motor operatedActuator without Sluce valve 200mm Size 594 Electromagnetic Flowmeter of 200mm Size 595 CE/UL Certified Radar type level transmittor for OHT 596 Three Month Trial & Run for 03 Month 597 ZONE-VIII 598 Transportation 599 Rig Machine 600 Transportation of Rig m/c and its T&P including Erection and Dismantling of Rig m/c. 601 Transportation of 250 psi compressor including Loading , unloading, Erection, Dismantling & labour etc complete in all respect . 602 O.P.Unit 603 Transportation of 2/3 cusec op unit including Loading , unloading, Erection, Dismantling & labour etc complete in all respect . 604 Drilling of Bore 605 Logging of bore hole by departmental/approved electric logger. 606 Drilling of 500mm dia bore from G.L. to 60m BGL. 607 Drilling of 450mm dia bore from 61m BGL to 100m BGL. 608 Drilling of 450mm dia bore from 100m BGL to165m BGL. 609 TUBEWELL ASSEMBLY 610 200mm dia size MSERW housing pipe 7.1mm thick including with 1 no 200 X 150mm dia M.S reducer 16mm thick, 1 noM.S. well cap 12mm thick , 10 no M.S. ring 100X12mm thick, M.S. S/I clamp ,T.W. Support (I Section) etc comp in all respect . 611 150mm dia MSERW 7.1mm thick plain /slotted pipe including with 20 no M.S ring 100X12mmthick , 1 noM.S. bail plug , 08 no center guide etc comp in all respect. 612 LOWERING OF T/W ASSEMBLY 613 Lowering of 200mm X 150mm dia tube well assembly in bore hole and shrouding of pea gravel between annular space ofbore hole and T.W. assembly from G.L. to 150m BGL. 614 Lowering of 200mm dia MSERW 7.1mm thick plain pipe from GL to 54m BGL. 615 Lowering of 150mm dia MSERW plain/slotted pipe 7.1mm thick from 55m BGL to 100m BGL. 616 Lowering of 150mm dia MSERW plain/slotted pipe 7.1mm thick from 100m BGL to 150m BGL. 617 PEA-GRAVEL 618 Supply of 1.6 - 4.8 mm size Lal Kuwan Quarry Pea-Gravel Duly Washed,Screened and properly Stacked at Site. 619 DEVELOPMENT OF TUBE WELL 620 Development of tube well by 250 PSI air compressor 621 Development of tube well by 250 PSI air compressor 622 Development of tube well by 3 cusec O.P. Unit 623 Development of tube well by 3 cusec O.P. Unit. 624 TEST 625 Chemical and bacteriological test. 626 Pumping plant and Other instrumentation work 627 SITC of 350 LPM, 48 m head 10 H.P. submersible pump set with 24 meter column pipe assembly, NRV, CI D/F Bend 90°, CI A/F Tee, D/F pipe (1.5m long 2 Nos and 1.0m long 1 No), Earthing, Painting Toolset, Power wiring of pump house internal and external, Chainpully block, and all Pumping plant accessories with nut bolts and rubber packing etc. Rates of items required for SCADA Automation of pumping plant are not included in these rates. 628 SITC of Automatic chlorination system SCADA Compatable chlorinating system. 629 Misc item such as protection ring, MCCB, Transformer oil, electric resistance, rubber sheet, 25 sqmm ormad cable and construction of canopyas per site requirement for protection of electronic device and safety purpose and nut bolts, rubber packing for extra/spare column pipe. 630 Supply & Erection of Servo Stabilizer of 15 KVA 631 CE/UL Certified Intelligent Smart Energy Meter 632 Soft Stater with RS485Port- 400 V Class, 633 Motor operated Actuator for with Sluice Valve of size upto 150 m 634 Electro magnetic flow meter upto150mm. 635 CE/UL Certified Hydrostatic type sub soil Water Level Transmiter for Tubewell 636 CE/UL Certified Pressure Transmiter . 637 SCADAAUTOMATION OF NEW TUBEWELL 638 SCADAAUTOMATION ITEMS 639 CE & UL Certified PLC/RTU in IP 54 enclosure suitable to Communicate with GSM based modemunit with CPU & Power supply with analog & digital parameter & fetures as specified for each tubewell/OHT & stand alone OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations as specified also enabled with UPS for power backup upto 2Hrs & automatic on/off switching arrangement. 640 G.S.M/G.P.R.S based wireless communication 4G Modem for RTU/PLC Capable to transfer & gather data from remote sites to control stations all accessories included with signal enhancer antenna made for pumping plant internet charges as specified in tender technical specification. 641 CE/UL certified 7 HMI touch screen suitable to communicate with PLC/RTU for local display and control of process parameters. 642 CE/UL Certified Surge protector for control panel 643 Complete cabling for all equipments at pump house 644 Control panel with IP 54 protection, industrial grade for all equipment (Separate for control (24V) and power equipment). 645 Installation, commissioing & testing for one tubewell 646 Trial Run for 3 month period for one tubewell 647 Automation of OHT 648 Motor operatedActuator without Sluce valve 200mm Size 649 Electromagnetic Flowmeter of 200mm Size 650 CE/UL Certified Radar type level transmittor for OHT 651 Three Month Trial & Run for 03 Month 652 ZONE-IX 653 Transportation 654 Rig Machine 655 Transportation of Rig m/c and its T&P including Erection and Dismantling of Rig m/c. 656 Transportation of 250 psi compressor including Loading , unloading, Erection, Dismantling & labour etc complete in all respect . 657 O.P.Unit 658 Transportation of 2/3 cusec op unit including Loading , unloading, Erection, Dismantling & labour etc complete in all respect . 659 Drilling of Bore 660 Logging of bore hole by departmental/approved electric logger. 661 Drilling of 500mm dia bore from G.L. to 60m BGL. 662 Drilling of 450mm dia bore from 61m BGL to 100m BGL. 663 Drilling of 450mm dia bore from 100m BGL to165m BGL. 664 LOWERING OF T/W ASSEMBLY 665 Lowering of 300mm X 150mm dia tube well assembly in bore hole and shrouding of pea gravel between annular space ofbore hole and T.W. assembly from G.L. to 150m BGL. 666 Lowering of 300mm dia MSERW 7.1mm thick plain pipe from GL to 54m BGL. 667 Lowering of 150mm dia MSERW plain/slotted pipe 7.1mm thick from 55m BGL to 100m BGL. 668 Lowering of 150mm dia MSERW plain/slotted pipe 7.1mm thick from 100m BGL to 150m BGL. 669 TUBEWELL ASSEMBLY 670 300mm dia size MSERW housing pipe 7.1mm thick including with 1 no 300 X 150mm dia M.S reducer 16mm thick, 1 noM.S. well cap 12mm thick , 10 no M.S. ring 100X12mm thick, M.S. S/I clamp ,T.W. Support (I Section) etc comp in all respect . 671 150mm dia MSERW 7.1mm thick plain /slotted pipe including with 20 no M.S ring 100X12mmthick , 1 noM.S. bail plug , 08 no center guide etc comp in all respect. 672 PEA-GRAVEL 673 Supply of 1.6 - 4.8 mm size Lal Kuwan Quarry Pea-Gravel Duly Washed,Screened and properly Stacked at Site. 674 DEVELOPMENT OF TUBE WELL 675 Development of tube well by 250 PSI air compressor 676 Development of tube well by 250 PSI air compressor 677 Development of tube well by 3 cusec O.P. Unit 678 Development of tube well by 3 cusec O.P. Unit. 679 TEST 680 Chemical and bacteriological test. 681 Pumping plant and Other instrumentation work 682 SITC of 700 LPM, 50 m head 15 H.P. submersible pump set with 24 meter column pipe assembly, NRV, CI D/F Bend 90°, CI A/F Tee, D/F pipe (1.5m long 2 Nos and 1.0m long 1 No), Earthing, Painting Toolset, Power wiring of pump house internal and external, Chainpully block, and all Pumping plant accessories with nut bolts and rubber packing etc. Rates of items required for SCADA Automation of pumping plant are not included in these rates. 683 SITC of Automatic chlorination system SCADA Compatable chlorinating system. 684 Misc item such as protection ring, MCCB, Transformer oil, electric resistance, rubber sheet, 25 sqmm ormad cable and construction of canopyas per site requirement for protection of electronic device and safety purpose and nut bolts, rubber packing for extra/spare column pipe. 685 Supply & Erection of Servo Stabilizer of 25 KVA 686 CE/UL Certified Intelligent Smart Energy Meter 687 Soft Stater with RS485Port- 400 V Class, 688 Motor operated Actuator for without Sluice Valve of size upto 150 m 689 Electro magnetic flow meter upto150mm. 690 CE/UL Certified Hydrostatic type sub soil Water Level Transmiter for Tubewell 691 CE/UL Certified Pressure Transmiter . 692 SCADAAUTOMATION OF NEW TUBEWELL 693 SCADAAUTOMATION ITEMS 694 CE & UL Certified PLC/RTU in IP 54 enclosure suitable to Communicate with GSM based modemunit with CPU & Power supply with analog & digital parameter & fetures as specified for each tubewell/OHT & stand alone OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations as specified also enabled with UPS for power backup upto 2Hrs & automatic on/off switching arrangement. 695 G.S.M/G.P.R.S based wireless communication 4G Modem for RTU/PLC Capable to transfer & gather data from remote sites to control stations all accessories included with signal enhancer antenna made for pumping plant internet charges as specified in tender technical specification. 696 CE/UL certified 7 HMI touch screen suitable to communicate with PLC/RTU for local display and control of process parameters. 697 CE/UL Certified Surge protector for control panel 698 Complete cabling for all equipments at pump house 699 Control panel with IP 54 protection, industrial grade for all equipment (Separate for control (24V) and power equipment). 700 Installation, commissioing & testing for one tubewell 701 Trial Run for 3 month period for one tubewell 702 Automation of OHT 703 Motor operatedActuator without Sluce valve 200mm Size 704 Electromagnetic Flowmeter of 200mm Size 705 CE/UL Certified Radar type level transmittor for OHT 706 Three Month Trial & Run for 03 Month
