}

Tender For Maintenance Work Of Electro-Mechanical Equipment’S At Basukinath Urban Water Supply Scheme Under D. W. & S. Mechanical Division Dumka During Shrawani Mela 2024., dumka-Jharkhand

Government Departments has published Tender For Maintenance Work Of Electro-Mechanical Equipment’S At Basukinath Urban Water Supply Scheme Under D. W. & S. Mechanical Division Dumka During Shrawani Mela 2024.. Submission Date for this Tender is 01-07-2024. Electromechanical Machinery Tenders in dumka Jharkhand. Bidders can get complete Tender details and download the document.




Tender Notice

43843063
Tender For Maintenance Work Of Electro-Mechanical Equipment’S At Basukinath Urban Water Supply Scheme Under D. W. & S. Mechanical Division Dumka During Shrawani Mela 2024.
Open Tender
Indian
Jharkhand
Dumka
01-07-2024

Tender Details

Tender For Maintenance work of Electro-Mechanical equipment’s at Basukinath Urban water supply scheme under D. W. & S. Mechanical Division Dumka during Shrawani Mela 2024.- 1 Cost towards special repairing and servicing of ML6 L&T make FASD starter suitable for operating of 75 HP VT motor pump set with changing of following L&T make-accessories. i. TimerST 100 (12-120 sec)- 01 No., ii. Thermal overload relay (90-150)-250 Amp Max -01 No. iii. on-off push buttons-02 Nos. (NO, NC)iv. Control & power wiring checking and changing as required.v. ML6 spare contact kit as per sample-1 set, vi. ML6 spare coil 240 volt/AC supply -01 set.vii. Water level controller for VT pump-01 set.viii. Water level controller sensor-01No.ix. Complete servicing with changing of ML6 FASD starter and testing on load. 2 Cost towards repairing of 150 KVA Oil cooled Servo Voltage Stabilizer working on three phase input Voltage-240 to 400 V and Output-400±1%V.Make-Power Linewith following works:- 3 Cost towards disconnection and cleaning of stabilizer with all labour tools and tackles. 4 Cost towards S/F of servo motor as per sample-10 kg each. 5 Cost towards s/f ofPanel Sensing/controlPCB Card as per sample 6 R.C kit 7 Wiring of stabilizer with 4 sq. mm wire. 8 Control transformer. 9 3.phase Digital Voltmeter (Input/Output) As Per sample. 10 Armored and shaft 11 Cost towards adding of transformer oil. 12 Cost towards complete servicing and repairing cost of stabilizer with all labour, tools and tackles and electrician charges etc. all complete job and testing on full load. 13 Cost towards repairing, overhauling and servicingof40 H.P centrifugal pump set having 1450 rpm,head-42 meter and discharge-22000GPH with following works-i. Complete dismantling of Pump set from base plate andopening & cleaning of Pump with all labour, tools and tackles.ii. Repairing ofStainless steel pump shaft-1No.with re-metalling of shaftand re-threading, turningand finishing as per sample iii. S.S. Shaft sleeve as per sample both sides-2 Nos., iv. Re-metalling, turning and finishing of bearing housing-2 Nos., v. M/F Gland titener as per sample-02 Nos.,vi. M/F Neck ring as per sample; vii. Nut-Bolt and studs as per sampleviii. S/F 6307 Ball bearings (SKF/NBC Make)-2Nos. each, x.Tyre coupling -01 No. as per sample. Complete re-assembling and overhauling of Pump, installing at site with all labour, tools & tackles and Testing on full load with transportation charge up & down etc. including the deduction of scrap materials all complete at raw water P/Plant Motihara. 14 Repairing of 100 mm dia. 40 ft. long G.I Suction pipe line with opening of suction pipe line ,cutting and welding of pipe as required & changing of 100 mm dia. G.I flange -10 Nos., welding of short pieces-04 Nos. for both pump set and complete reassembling of suction pipe to its original position with s/f of rubber sheet, Nut bolts with all labour tools and tackles at site. 15 Cost towards special repairing of motor control panel with FASD starter – 2 nos.and 200 Amp, 415Volts MCCB incommer -01 No. & 160 Amp outgoing MCCB-02 Nos. with following works-(i) Changing L&T MNX contactor –with L&T MNX contactor asMain contactor(MNX-70)-01 No.(ii) Star contactor (MNX-50) and delta contactor (MNX-70)-01 No. each with Front & Side Add on Auxiliary contacts- (2NO+2NC) -02 nos. each (iii) Thermal overload Relay MN(45-70)-01 No.(iv) 200Amp copper bus bar as per sample-01 No.(v) Changing of damaged wires as per required and Copper lugs(vi) Timer (03-30 sec)-01 No. (L&T Make) (vii) ON-OFF push buttons-02 Nos. (viii) 3 ph Digital Voltmeter (L1-L2-L3-Hz)-01 No.(ix) Digital Ampere meter-01 No., (x) Single phasing, reverse current, under voltage, over voltage protection device (MPD)-01 set. (xi) LED Phase indicating bulb-06 Nos., (xii) 3 way Selector switch-01 No.etc. with all fitting & electrician charges at P/Plant.

Key Value

Document Fees
INR 750 /-
EMD
INR 6000.0 /-
Tender Value
Refer document
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail