Tender For Construction Of Auditorium At Seema Jan Kalyan; 1 Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 Mtr, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in lead of 50 mtr. All kinds of soil. 2 Earth filling with available surplus soil excavated from foundations and taken only from outside of building plinth in layers not exceeding 20cm in depth, consolidating each deposited layer including ramming and watering and consolidation with lead up to 50 m and lift upto 1.5 m. 3 Providing and laying in position cement concrete including curing compaction etc . Completein specified grade excluding the cost of centering and shuttering. All work up to plinth level using crusher broken aggregate (1:4:8) 4 Random rubble stone masonary for foundation and plinth in cement sand mortar above 30 cm thick wall in:Cement Mortar 1:6 ( 1 cement : 6 Sand ) 5 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level : (1:1.5:3) 6 Random rubble stone masonary for foundation and plinth in cement sand mortar above 30 cm thick wall in:Cement Mortar 1:4 ( 1 cement : 4 Sand ) Extra for random rubble masonry with hard stone in superstructure above plinth level and upto two stories. 7 Centering and shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formworks for foundation in basement rafts, footings, straps beams, bases of columns etc. up to plinth level. A 8 Centering & shuttering with ply wood or steel sheets including strutting , propping, barcing both ways with wooden members and removal of form work up to floor three level for: 9 Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto two stories excluding the cost of centring, shuttering, finishing and reinforcement: 10 Providing and fabricating reinforcement for RCC work including straightening, cutting, bending, placing in position in binding (including cost of binding wire ) all complete up to floor three levelHot rolled deformed bars (IS: 1139) 11 Half brick masonry with bricks of class designation 75 in superstructure above plinth level upto two stories. : cement mortar 1:4 (1 cement : 4 coarse sand) 12 Providing corrugated G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpetwashers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 1.00mm thick with zinc coating not less than 275gm/m² 13 Cement plastering including T&P, scaffolding, material and complete labpour, including cost of water, curing, racking of joints etc. with 20 mm cement plaster of mix :1:4 (1 cement : 4 fine/ coarse sand) 14 Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) : Raised and cut pointing 15 Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. Jhunjhunu / Jalore (Red / Choclate Colour) - Above 3600 Cm2 Tiles 16 Providing and fixing 1st quality ceramic glazed vitrified tiles of colour standard white, grey, ivory, fume, red brown, light green, light blue, and other light shades with water absorbtion less than or equal to 0.08% confirming to IS : 13753 & IS : 15622 in floor, steps etc laid on bed on neat cement slury finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the the cost of cement plaster on wall and pillar) Size 600mm x 600mm 17 P & F 1st quality Vitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufacture) with water absorption less than 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1 : 4 including grouting the joints with white cement and matching pigment etc complete. 18 Crazy marble stone flooring including filling the gaps with light shade pigment with white cement marble powder mixture (3 parts of white cement : 1 part of marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 white, black or white and black marble chips of sizes from 1mm to 4mm nominal size by volume) and under layer 25mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) rubbing, polishing and cement slurry etc. complete :18 mm thick crazy marble stone white, black or as specified. 19 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: 32.49.1 Two or more coats on new work 20 Stone work (machine cut edges) for wall lining etc. (veneer work) backing filled with a grout of 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing by means of cramps which shall be paid for separately) : 70 mm thick. 21 Supplying and fixing Jaisalmer stone Dassa (sills) fine dressed upto 15 cm. Thickness including panny type ornamental work. 22 Supplying and fixing Jaisalmer stone pillars (Surahidar) with flute fullydressed and carved with ornamental workcomplte. FULLEXPOSED PILLAR 23 Supplying and fixing Jaisalmer Takiya and Thambli fully dress and with ornamental cut stone work complete for railing and parapet etc. 24 Supplying and fixing Jaisalmer stone Moulded arches (Margole) Fully dressed carved with ornamentalwork 10 to 15 cm. Thick for Tibaries. FULLY FLOWERED 25 Supplying and fixing stone lintels / bed plates of approved quarry rough dressed in cement mortar 1:4 26 Supplying and fixing Jaisalmer stone Galat (moulded cornice) fine dressed and carved with cut stone workcomplete. 27 Supplying and fixing Jaisalmer stone Chhajja (including projection) 5 to 7 cm. Thick fully dressed carved with cut stone work weather dripped complete. 28 Supplying and fixing in cement sand mortar 1:4 sand or other approved stone dassa or coping of thickness 75 to 100 mm (Machine cut) : Plain or Bull nosed. (CHAAP) 29 Supplying and fixing Jaisalmer stone kangoora fine dressed and ornamental cut work upto half depth complete. 30 Providing & fixing door, window, chowkhats and other frames, including anti termite treatment, M.S. flat, hold fasts of size 250 x 40 x 3mm fixed with M.S. bolt 5mm dia 50mm long duly embedded in cement concrete M-15 grade : 31 Providing and fixing fully panelled/partly panelled/ double leaf shutter frame for doors as per approved design and drawings with approved ordinary C.P./ oxidised steel fittings as per Annexure - A and width of styles & top rails of 100mm and lock rails width of 150mm and bottom rails of 200mm width including teak wood beading of size 19mm x 12mm on both faces complete : 32 Providing & Fixing in position, Acoustical Ceiling with following Panels on approved heavy duty G.I. frame ceiling channels at 450 c to c, & intermediate channels not more than 1200 c to c, along with ply wood forms suspended with Hangers from Roof, in front of 1000 Gsm synthetic wool 50 mm thick, with Paint, including cost of required Cut-Outs, decorative mouldings / finishing-items & Scaffolding, as per Architectural & Acoustical Design & Instructions & Complete in all aspects.including all materials labour, finishing etc complete -Gypsum Plain panels main hall slab 33 P & F Europeantype white glazed vitreous china Ist quality W.C.pan (I.S: 2556 Mark) withP or S trap including cutting and making good the wall and floor. 34 P & F water closet Seat Covers with brass hinges complete: 35 P&F Ist quality WVC Urinal (IS :2556 mark) with 25 mm dia G.I.waste pipe, dome waste couplings, concealed iron brackets or screw etc. completeFlat back (large) or half stall size 610x400x80mm 36 Mini stall size 455 x 385 x 350 mm 37 P & F Automaic Flushing Cistern of first quality (IS: 774 mark) of approved make fitting siphon with coppre tube, C.I. brackets complete including cutting and making good the wall. 38 P & F WVC wash basin (Ist quality, I.S.: 2556 Mark) of approved make with C.I. brackets duly painted 1 No 15 mm C.P. pillar cock (I.S. : 8934 Mark) & 32 mm C.P. brass wastecoupling of approved make, 25 mm G.I. waste pipe complete including cutting & making good the wall. Size 510 x 400 mm460 dia for counter top 39 P & F Beveled edge Mirror of special glass of approved make (Atul Modi Guard Saint Gobin orequivalent) complete with 6 mm thick asbestos cement sheet ground fixed to wooden screw & washers. 40 P & F Towel Rail or Ring of approved quality/ make: C.P. brass towel rail elbow type with concealed screws size 450 mm (Heavy duty) 41 P & F Grating of approved quality /make Stainless steel sheet size 125 mm dia 42 P & F jet spray for water closet with C.P. Copper tube flange of approved make 43 Providing and fixing C.P. flange for 15 mm dia taps 44 P & F GI pipes ( Internal works ) with GI fittings excluding Union(IS:1239 mark) and MS clamps, including cutting and making good the wall and floors 15mm dia. 45 25 mm dia 46 P & F GI pipes ( External works ) with GI fittings eccluding Union(IS:1239 mark)and MS clamps, including trenching and refilling earth etc. 15mm dia Nominal Bore 47 25mm dia Nominal Bore 48 P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make: 49 P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. 50 P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make 51 P & F Flush Cock / Flush Valve (IS : 9758 Mark) for WC of approved quality make :(-do-)exposed 25mm nominal bore. 52 P & F PVC Storage Tank (IS : 12701 marked indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design:1000 litres capacity. 53 P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant.110mm dia 54 P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: Coupler (socket)110 mm dia 55 Plain tee110 mm dia 56 Door tee 57 Bend 87.5 58 Pipe clip 59 Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m 10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr. 60 Construction of septic Tank in all types of soil with 40 Cm .thick masonry in CM 1:6, 15 Cm thick C.C bed of 1:5:10, M-15 grade C.C flooring & over stone slab covering ,80 mm thick slab ,jointing of slab in CM 1:3. Ralthal, Kharanja, 50 mm thick stone partition walls, 20 mm thick plaster in CM 1:6 finished with neat floating cement, 4 Nos C.I foot rests of approved design ,two No. 450 mm dia each Ferro cement cover with frame, earth work etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 mtr:-Size 400x140x150 cms (for 50 users) 61 Supplyinganddrawingfollowingsizesof3x1.5 sq.mm armouring FR PVC insulated copper connectorcableintheexistingsurface/recessed steel/ PVC conduitas required. 62 SITCof16Amp.universalboxcomprisingof combined15Amp.switchand5pin15Amp. socket complete with connection etc. as required. 63 Supplyingandinstallingfollowingsizeof perforated pre-painted M.S. cable trays with perforationnotmorethan17.5%,inconvenient sections,joinedwithconnectors,suspendedfrom the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.300 x 50 x 1.6 mm BSR 64 P & F IP20 LED ceiling/recessed/suspended mountinglightfixturemadefromCRCAsheet steelhousing,highpurity/transmisivitydiffuser for uniform light distribution. High efficiency driver electronics having efficiency > 85% and in compliancetoIECstandards(integralwithlight fixture).Powerconsumpationof40w/50w/60 w~3000/3300/42000 lumens system lumen efficatyof70-80Im/Wattoutputsuatbale For fixture,lifetimeof50,000burninghourswith 70% initial lumens mainted cct 3000*k 4000*k & 6000*kFixtureShalbececompliance CODE 193314 (BSR Item) make philips/bajaj BSR 65 P&ofIP20LEDRecessed/SurfaceMounted,Round / Sqauar Non-Dimmable Downlight With die-cast aluminum Housing & Heat Sink For Heat dissipationHightPurityreflectorWithexternal driver having eficiency >85% Andin compliance to IEC Standerd. Power Consumption of > 7w/10w/15w/18w With ~ 500 / 750 / 1100 / 1250 lumenssystemlumensefficatyof70im/watt output Suitable to replece 1x18w / 2x18w /2x26w CFLDownloading,LifeTimeof50000Burnig Hourswith70%ofintiallumenmaintanedCCT 3000*k ,4000*k&6000*KfixtureshalbeCE Compliance(BSR Item) make philips/bajaj BSR 66 P& of IP20LEDbattentype Fixtiremade From CRCASheetSteelHousingSuitableFor Mounting LED tube system (integral driver ) powerconsumptoinof18w/36w/1500-3000 lumenssystemlumenEfficiency80LM/Watt output,lifeTimeOf50000burning hourswith 70% initial lumen maintained, CCT 30000*k, 30000*k &46000*k 2LEDtubeshapefixture 18W make philips/bajaj BSR 67 P& of IP20LEDbattentype Fixtiremade From CRCASheetSteelHousingSuitableFor Mounting LED tube system (integral driver ) powerconsumptoinof18w/36w/1500-3000 lumenssystemlumenEfficiency80LM/Watt output,lifeTimeOf50000burning hourswith 70% initial lumen maintained, CCT 30000*k, 30000*k &46000*k 4LEDtubeshapefixture 18W(BSRCodeNo193401)makephilips/bajaj BSR 68 P&f strip litefluorscent pvc fitting complete with accessories (lowloos coper choke starter seat)adapterwithterminalblockdulyprewiedwith coper conductor including makingconnection testing etc as required (without tube )make philips/bajaj BSR 69 P&fISIMarkedFollowingmodularaccessories withdecorativecoverplateofapprovedcolurs including making connections est. as required (make SSK anchor cona or equivalent BSR 6 amp oneway switch BSR 70 P&f ISI Marked Following modular accessories with decorative cover plate of approved colurs including making connections est. as required (make SSK anchor cona or equivalent BSR 6 amp 3 Pin shuttered socket BSR 71 Supply & drawing 2x1.5 sq mm FR PVC insulated & unsheated flexiable copper coductor ISI marked (IS : 694)of 1.1 kv grade and approved make in existingsurfaceorrecessedconduit/casing capping including making connection etc. as required.2x1.5 sq mm BSR 72 Supply&drawing FRPVCinsulated& unsheatedflexiablecoppercoductorISImarked (IS : 694)of 1.1 kv grade and approved make in existingsurfaceorrecessedconduit/casing capping including making connection etc. as required. BSR 2x2.5 sq mm BSR 73 S&f of following size (dai) of ISI marked medium duty PC conduit along with accessories in surface/ recesses using saddles, clamps, fastener as required including cutting the wall covering conduit and making good the same as required 25 mm BSR 74 P&fISIMarkedFollowingsizedipgalvanizedM.S.boxof20SWGWithEartingTerminalin recess/surfaceformodular accessoriesas required(BSR E073307) 75 P&F krone module with base frame in the resess surface made out of 16 SWG sheet steel box front openble having locking arranfement duly powder painted including dressing ferrulling and punching of telefone cable with krone tool etc as required (BSR no. E040704 76 20 P&F Triple pole and natural MCCB 40-63Amp BSR
