Tender For Fire Fighting/Fire Alarm System (Conventional) & PA System Works in BIDA Mart, Bhadohi, 1 Sub Head- 1: External Works 2 Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia 3 Providing and laying, testing, & commissioning of C class heavy duty MS pipe conforming to IS 3589/IS 1239 including welding, fitting like elbow, tees, flanges, tapes, nut/bolt, gasket etc and fixing the pipe on the wall/ceilling with suitable clamps/support frame and painting with two or more coats of synthetic enamel paint of required shade complete in all respect.150mm nominal bore (pump room, external hydrant, FBI & siamese connection pipe, pump room to FFTG shaft) 4 Providing, fixing,, testing &commissioning of installation control valve of cast iron, brass/bronze working parts comprising of water motor alarm, bronze seat clapper , clapper arm and hydraullic driven mechanical going bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauge, emergency release, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orific plate, gasket etc 150 mm dia. 5 Supplying and fixing of the Fire brigade connection of cast iron body with gun metal male instantaneous inlet coupling complete with cap and chain as reqd for suitable dia MS pipe connection conforming to IS 904 as rquired for 4 way-150 mm dia MS pipe 6 Sub Head- 2: Internal Fire Fighting Works (Hydrant System) 7 a)Suppling, installation, commissioning& testing of electric driven terrace pump suitable for automatic operation and consisting of following in all respect, as required:((Terrace Pump)b) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bromze impeller with stainless steel shaft, mechanical confirming to IS:1520 c) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP 55 class of protection for enclosure, Horizontal foot mounted type with Class-F insulation, confirming to IS-325d) MS fabricated common base plate, coupling, coupling guard, foundation bolts etc as required.e) Suitable cement concrete foundation duly plastered and with anti vibration pads.900 lpm at 35m Head 8 Providing & fixing of pressure switch in MS pipe line including connection ectc as required ( for terrace booster pump) 9 Providing and fixing in position the industrial type pressure gauge with gun metal / brass valves complete as required ( for terrace booster pump) 10 Supplying, fixing, testing & commissioning of butterfly valve of PN 1.6 rating with bronze/gun metal seat duly ISI marked complete with nuts, bolts washers, gasketconforming to IS 13095 of 150 mm dia. 11 Providing, installation, testing and commissioning of 150 mm dia non-return valve confirming to IS:5312 complete with rubber gasket, GI bolts, nuts, washers etc as required. 12 Providing, laying, testing and commissioning of C class heavy duty MS pipe conforming to IS 3589/IS 1239 including welding, fitting like elbows, tees, flanges, tapers, nut bolts, gasket etc and fixing the pipe on the wall/ceilling with suitable clamps/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required: 13 80 mm nominal bore 14 150 mm nominal bore 15 Supplying and fixing of single headed internal hydrant valve with instantaneous Gunmetal/Stainless steel coupling of 63mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type-A) with blank gunmetal /Stainless steel cap and chain as required:Single headed Gunmetal 16 Supplying and fixing first aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required.20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type-2 as per IS:1258520 mm nominal internal dia gun metal globe valve &nozzle. Drum and brackets for fixing the equipments on wall. Connection from riser with 25mm dia stop gun metal valve & MS pipe and socket.40 m 17 Supply and fixing 63mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc conforming to IS 636 (type-A) as required Gun metal 18 Supplying and Fixing 63mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required:Gun Metal 19 Providing and fixing standard fire mans axe with heavy duty insulated rubber handle. 20 Providing of FHC door made of 16 gauge MS sheet with frame of size 105x70mm complete door and frame assembly including all hardwares 9 concealed Flush handle, Allen keu Lock, MS hinges, 5mm Thick Float glass) & accessories. The door to be painted with Fire resistance paint. The scope shall also include the painting of the frame with the same paint as the shutter or complete as per direction of Engineer-in-charge. (Approx size of door: 900mm widt & 1500mm Height) 21 Supplying and Fixing orifice plate made out of 6mm thick stainless steel (Grade 304) with orifice of required sizeto be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required. 22 Supplying and fixing of air vessel made of 250 mm dia 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required. 23 Sub Head- 3: Sprinkler System 24 Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinkler of rating 68 degree centigrade with required accessoriesPendent Type Sprinkler 25 Suplying, installation, testing and commissioning of Sprinkler flexible pipe (UL listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175PSI test pressure of 875PSI (Burst) with branch line (Inlet) 25 mm NPT male thread to sprinkler head (Outlet) 15 mm NPT female thread with reducer, nipple, 2side brackets, center bracket, stockbar of length upto 1000 mm sizes complete as required. 26 Providing, laying, tesing & commissioning of C class heavy duty MS pipe conforming to IS 3589/IS 1239 including welding, fitting, like elbows, tees, flanges, tapers, nuts bolts, gasket etc and fixing the pipe on the wall /ceilling with suitable clamps/support frame and painting with two coat or more coats of synthetic enamel paint of required shade complete as required. 27 150mm nominal bore 28 100mm nominal bore 29 80mm nominal bore 30 65mm nominal bore 31 50mm nominal bore 32 40mm nominal bore 33 32mm nominal bore 34 25mm nominal bore 35 Providing and fixing flow switch in 150mm dia MS pipe including connection etc as required. 36 Suplying, installation, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts bolts, washers, gasket conforming to IS 13095 of following sizes as required:150mm dia 37 Sub Head- 4: Fire Extinguisher 38 Supply and fixing of C02 type fire extinguisher 4.5 kg. capacity(ISI Marked IS : 2878 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work. 39 Supply and fixing of fire extinguisher, ABC Type 6.00 kg. capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work. 40 Providing and Fixing Fire related signages printed on photoluminescent U1000 aluminium sheet of 1.0 mm (+-10%) containing Lumigen II as base chemical, covered under UV stablized coating and of appropriate size including fixing on wall, door, ceilling etc with proper clamps, hangers, cleats, anchor fasteners etc complete in all respect as directed by Engineer-In -Charge. 41 Sub Head- 5: Electrical Works (For Terrace Pump) 42 Supplyandlayingof aluminiumconductorPVCinsulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 10 sq. mm 4 core 43 Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring ofthe cable shall be properly connected with the earth as per direction of Engineer-Incharge. 10 sq. mm 4 core 44 Fabricating and Supply, Installing testing and commissioning of sheet steel clad floor mounting control panel having suitable size for control of 1 nos booster pump 9.3Kw/12.5HP each having suitable Incoming MCCb, incoming voltmeter with selector switch and fuses. Star Delta starter with hand reset overlaod cum single phase preventor type relay, ammeters to read current in one phase, alrm with reset push button which will automatically reset for the next cycle (As per technical specification) ( At terrace pump) 45 Supplying and Installing following sizes of Perforated pre-painted MS cable tray with perforation not more than 17.5% in convenient sections, joined with connectors, suspended from the ceilling with MS suspenders including bolts & nuts, painting suspender etc as required.150mm width x 50mm depth x 1.6mm thickness 46 Sub Head- 6: Fire Detection and Alarm System 47 Supplying, installation, testing & commissioning of main control and indicating panel made out of 16SWG MS sheet to accommodate the following items duly power coated in approved colour with louvers for ventilation, locking arrangement, audio and visual indication for fire alarm and public address system, monitoring system including connections, interconnections etc complete as required.10 zone panel for fire alrm system (Agni/Alpha/Daksh/Equivalent)250 watt amplifier racks suitable vfor operation on 230 volt AC/24V DC supply conforming to IEC-268-3 complete with all accessories as required- 2Nos (one to act as standby)Talk back master station with LED PTT (press to talk) push button for operation on 230V AC/24V DC supplyconforming to IEC 268 for simplex mode of operation /communication suitable for 20Nos talk back unit-1 setAnnouncement control desk suitable for selection of different zones sewlectively and ON All Call switch with visual indication etc. complete as required -1 setAmplifier changeover switch for inter changing amplifier- 1 noMonitor panel for loud speeker complete with output selector, ON/OFF switch, fuse, visual indications etc, complete as required-1 NoGeoseneck microphone with stand and ON/OFF switch-1 no, Main ON/OFF switch, fuse indiaction lamps, DC and AC voltmeters and ammeters, terminal blocks etc, complete as required- 1 setBattery charger trickles cum boost to take complete load of fire alrm & PA system complete with all accessories including providing & fixing of 2 nos 12 volts, 60AH each sealed maintenance free batteries- 1 set 48 Supplying, installation, testing & commissioning of sector panel suitable for 4 Zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete as required. (Agni/Alpha/Daksh/Equivalent) 49 Supplying, installation, testing & commissioning of Smoke Detector with bulitin LED and mounting base complete with all connections etc as required.(System sensor/Apollo/Edwards/FST) 50 Supplying, installation, testing & commissioning of Heat Detector operating at 54c/57c with rate of rise cum fixed temperature (dual thermistor) with mounting base complete with all connections etc as required. (System sensor/Apollo/Edwards/FST) 51 Supplying, installation, testing & commissioning of response indicator on surface/ recessed MS box having two LED, metallic cover complete with all connections etc as required. 52 Supplying, installation, testing & commissioning of manual call boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc as required. (Agni/Daksh/Equivalent) 53 Supplying, installation, testing & commissioning of fire alarm sounder with facility to make announcement, mounted in MS box (16SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc complete as required. (Agni/Alpha/Daksh) 54 Supplying, installation, testing & commissioning of talk back slave station in surface/recess suitable for operation on simplex mode complete with PTT knob & speaker/microphone enclosed in a MS (16 SWG)/ ABS box with break glass in front etc complete as required. 55 Supplying & laying of 2x1.5 sqmm fire alarm armoured cable 600/1000 V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required. 56 Supplying and fixing of 25 mm dia steel conduit along with accessories in surface/recess including painting in case of surface conduit or cutting the wall and making good the same in case of recessed conduit as required. 57 Sub Head- 7: Public Address (PA) System 58 Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB, MP3 player ( including 6 zone button paging station) with seamless integration facility with main fire alarm panel for voice evacuation complete as required. 59 Supplying, installation, testing & commissioning of 1.5/3/6 W metal box ceilling/wall speakers complete as required. 60 Supplying, installation, testing & commissioning of digital audio amplifier 50 watt, 25V rms operating at 240 Volt AC supply complete as required. 61 Supplying, installation, testing & commissioning of exit point directional sound speaker with voice and integral audio amplifier with selectable sound pulse patterns complete as required 62 Supplying and drawing of cable Fire Retardant Pvc insulated copper conductor cable in existing surface/ recessed steel conduit speaker cable three pair, 2 core, 1.5 sqmm including connections and interconnections etc as required. 63 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the vwall and making good the same in case of recessed conduit as required. 64 25 mm dia PVC conduit 65 GST 18%
