}

Tender For Supply, Installation, Testing, Trial Run And Commissioning Of 50 Hp Vertical Axial Flow Pump 5 Numbers And 20 Hp Vertical Axial Flow Pump 1 Number For Different Padasekharam In Alappuzha, alappuzha-Kerala

Department Of Agriculture has published Tender For Supply, Installation, Testing, Trial Run And Commissioning Of 50 Hp Vertical Axial Flow Pump 5 Numbers And 20 Hp Vertical Axial Flow Pump 1 Number For Different Padasekharam In Alappuzha. Submission Date for this Tender is 01-07-2024. Submersible Pump Tenders in alappuzha Kerala. Bidders can get complete Tender details and download the document.




Tender Notice

43781265
Tender For Supply, Installation, Testing, Trial Run And Commissioning Of 50 Hp Vertical Axial Flow Pump 5 Numbers And 20 Hp Vertical Axial Flow Pump 1 Number For Different Padasekharam In Alappuzha
Open Tender
Indian
Kerala
Alappuzha
01-07-2024

Tender Details

Supply, Installation, Testing, Trial Run And Commissioning Of 50 Hp Vertical Axial Flow Pump 5 Numbers And 20 Hp Vertical Axial Flow Pump 1 Number For Different Padasekharam In Alappuzha , Supply, Installation, Testing And Commissioning Of Vaf Pump Set. Suitable For Handling Clean/Slurry/Saline/ Silty Water With Rpm 960 (Syn) Or Less. The Material Of Construction Of Flange, Suction Bell, Bowl, Shroud Shall Be Ci With 2 % Nickel Impeller Shaft, Shaft Sleeve, Fasteners And Suction, Delivery Pipe Should Be In Ss (Size Suitable For Pumps) Of Suitable Length Various From To 6-10M As Per Site Condition.The Prime Mower Of The Pump Is To Be 3 Phase Tefc Induction Motor With Isi Certification Operating At 415V ±10%,±5% 50Hz ±5 % Connection With F – Class Insulation, 10Mm 3 Core Water Proof Copper Power Cable, 20M As Per Sit Condition. Cubicle Type Fully Wired Panel Board With All Necessary Protection Units And Instrumentation. Auto Transformer Starter Of Reputed Make Mccb, Led Indicator, Selector Switch And Single Phase Dry Running Preventer Suitable Capacitor Wiring Earthing Should Be As Per Regulations And Specifications Ofcurrent Kseb And Electrical Inspectorate. A Screen With 6Mm Gi Welded Mash With 50 X 50 Mm Opening Size (About 20 Square Meter Area) Formed In Gi Angles And Gi Tubes Fitted At The Opening On Top And Sides Of Sump To Prevent Entry Of Unwanted Materials To The Pump. Proper I – Section Should Be Provided For Supporting The Motor Mounting And Pedestal Suitable Chain Block And Tripoed Facilities To Be Provided For Lifting The Motor At Least 1.00M Above Maximum Flood Level. , Duty Point Head (M) 2.00M Minimum Discharge At Duty Point Lps 700 Working Head Range 0.5-4.5M Minimum Efficiency 65% Available Connected Load 50Hp , Duty Point Head (M) 2.00M Minimum Discharge At Duty Point Lps 700 Working Head Range 0.5-4.5M Minimum Efficiency 65% Available Connected Load 50Hp , Duty Point Head (M) 2.00M Minimum Discharge At Duty Point Lps 700 Working Head Range 0.5-4.5M Minimum Efficiency 65% Available Connected Load 50Hp , Duty Point Head (M) 2.00M Minimum Discharge At Duty Point Lps 700 Working Head Range 0.5-4.5M Minimum Efficiency 65% Available Connected Load 50Hp , Duty Point Head (M) 2.00M Minimum Discharge At Duty Point Lps 700 Working Head Range 0.5-4.5M Minimum Efficiency 65% Available Connected Load 50Hp , Duty Point Head (M) 3.00M Minimum Discharge At Duty Point Lps 250 Working Head Range 2.0-4.5M Minimum Efficiency 65% Available Connected Load 20Hp

Key Value

Document Fees
INR 9100 /-
EMD
INR 45150.0 /-
Tender Value
Refer document
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail