tender for Smriti Dwar - memorial gate In The Name Of Sushma Swaraj, Former Honorable Minister, Government Of India, At Bareilly Border, Badaun(Sadar), 1 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 2.8.1 All kinds of soil. 2 1:4:8(1 cement : 4 coarse sand (Zone III ) derived from natural sources: 8 graded Stone aggregate 40mm noinal size derived from natural sources etc. as per D.S.R.NO. 4.1.8 3 Brick work with common burnt clay F.P.S ( non modular ) bricks of class designation 7.5 in foundation and plinth in 1:4 (1cement :4 coarse sand )as per D.S.R.NO. 6.1.1 4 12mm Thick cement Plasterof mix 1:4 (1 cement :4 coarse sand ) as per DSR 13.4.1 5 Reinforced cement concrete work in beams.suspended floors, roof having slope up to 150 landings, balconies, shelves,chajjas, lintels, bands, plain window sills, staircases and spiral staircases above plinth level upto floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:15:3(1 cement: 1.5 Coarse sand (Zone III) derived from natural sources: 3 graded Stone aggregate 20mm noinal size derived from natural sources (All work upto plinth)as per D.S.R.NO. 5.3 6 S/F Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars (DSR 2023 Item No- 5.22.1) 7 Steel Work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as per DSR NO. 10.25.2 8 16.60 Manufacturing supplying and fing retra reflective overhead signage heards made up of 2 mm thick aluminium shret, face is be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type it of ASTM D-4956-01 as approved by Engineer in charge, letters, borders etc., as per IRC: 67-2001 silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class 11 of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable stred aluminium alloys, rivets or belts & nuts 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-in-charge (Structural frame work including MS. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment) 9 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture (DSR 2023 Item No-13.62.1) 10 As in Item 820 But size above 2.5cm but up to 8cm as per Letter writing PWD Schudle 821 SINGBOARD 11 Providing and fixing 18 mm thick Granite Stone gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand), joints treated with white cement, muxed with matching pigment, epoxy touch ups, including rubbing curing, moulding and polishing to edges to give high glass finish etc. complete at all levels. AS PER DSR #2.2.2 Area of slab over 0.50 sqm SING BOARD
