Tender For Campus Development/ Upgradation Work In P.M. College Of Excellence Pg College Seoni Part-I Tender For Campus Development/Upgradation Work In Prime Minister College Of Excellence Scheme In P.G.College Seoni Part-I, Surface Dressing Of The Ground, seoni-Madhya Pradesh

tender for Campus Development/ Upgradation Work In P.M. College Of Excellence Pg College Seoni Part-I Tender For Campus Development/Upgradation Work In Prime Minister College Of Excellence Scheme In P.G.College Seoni Part-I, Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. in all kinds of soil. Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m lead and lift up to 1.5 m, disposed soil to be levelled and neatly dressed, All kinds of soil Filling available excavated earth (excluding hard rock/Ordinary rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m., Supplying and filling in plinth with crusher stone dust/ coarse sand under floors including, watering, ramming and compacting in layers not exceeding -Supplying and filling in plinth under floors including watering ramming consolidating in layers not exceeding 20cm in depth and dressing complete. With hard muram having CBR >12% at under floors including watering, ramming and compacting (minimum compaction 95% of MDD) in layers not exceeding 20cm in thickness and dressing complete. (Note:- maximum thickness of this layer to be provided shall be 30cm), 11.49 Ceramic glazed floor tiles Providing and laying Ceramic glazed floor tiles 300x300 mm or more (having thickness 6 to 7mm) of 1st quality conforming to IS: 15622 of approved make in any colours and shade laid on 20 mm thick Cement Mortar 1:4 (1 Cement: 4 sand) including pointing the joints with white cement and matching pigment etc., complete. 11.50 Ceramic glazed wall tiles Providing and fixing Ceramic glazed wall tiles 300x450 mm or more (having thickness 6 to 7 mm) of 1st quality conforming to IS: 15622 of approved make in all Colours& shades, except burgundy, bottle green, black laid on 12mm thick bed of Cement Mortar 1:3 (1 Cement: 3 sand)preprad same day when mortar is still green jointed with grey cement slurry @3.3 kg per sqm including pointing the joints with white cement and matching pigments etc., complete IT.NO 14.1Repairs to plasterRepairs to plaster of thickness12mm to 20mm in patches of area2.5 sq. metres and underincluding cutting the patch inproper shape, raking out jointsand preparing and plastering thesurface of the walls completeincluding disposal of rubbish tothe dumping ground within50metres lead: With cementmortar 1:4 (1 cement: 4 14.30 Removing dry or oil bound distemper Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete 13.41 White cement based putty Providing and applying white cement based putty of average thickness 1 mm, of approved brand over the plastered wall surface to prepare the surface even and smooth i/c all cost of material, labour and scaffold etc in all position complete. Note: Putty shall be applied only on the internal walls, for application on the exterior walls prior permission of APD/Chief Engineer will be required, 13.49 Acrylic emulsion paint Wall painting by any mechanical or manual means with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre. of approved brand and manufacture, including applying additional coats wherever required to achieve even shade 18.6 CPVC pipes internal work Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings18.6.1 Exposed on wall Internal work - Exposed on wall18.6.1.1 15 mm 15 mm nominal outer dia. Pipes, 17.17 Water closet Indian type Providing and fixing white vitreous china water closet squatting pan (Indian type)17.17.2 Orissa pattern Orissa pattern W.C. pan of size 580x440 mm

INR 2000 /-

INR 38000.0 /-

INR 19 Lakhs /-