|
| 1 | Electrical Workshop Items/Line Material : as per IS Standards |
| 2 | DPC Aluminum of sizes 13SWG, 14SWG,16 SWG and 18SWG of standard make |
| 3 | Suspension/Tension Clamps with eye hook complete |
| 4 | Insulating piercing Connector ( Al 10-95sqmm) |
| 5 | Packing Gutties |
| 6 | Super enamelled (SE ) 13 SWG, 16 SWG, 18 SWG and 21 SWG of standard make |
| 7 | 11 KV Pin Insulator with GI Pins, 5KN Complete(Porcelien) of standard make |
| 8 | Straigh through Cable Jointing Kit for 120sqmm LTAB Cable |
| 9 | Straigh through Cable Jointing Kit for 50sqmm LTAB Cable |
| 10 | Lathoride Paper 10 Mil of standard make |
| 11 | Lathoride Paper 20 Mil of standard make |
| 12 | HT Paper 3 Mil of standard make |
| 13 | Hard Card Board 1mm of standard make |
| 14 | Hard Card Board 2mm of standard make |
| 15 | Hard Card Board 3mm of standard make |
| 16 | Glass Sleeves of Sizes of standard make |
| 17 | Fiber Tubes of standard make |
| 18 | Bush Rods 12mm(LT) of standard make |
| 19 | Bush Rods 19mm(LT) of standard make |
| 20 | Bush Rods 25mm(LT) of standard make |
| 21 | Bush Rods 30mm(LT) of standard make |
| 22 | HT Bush for DTs of standard make |
| 23 | LT Bush Set for 250KVA DT of standard make |
| 24 | LT Bush Set for 63KVA DT of standard make |
| 25 | LT Bush Set for 100KVA of standard make |
| 26 | Aluminum Thimbles 95sqmm of standard make |
| 27 | Aluminum Thimbles 120sqmm of standard make |
| 28 | Aluminum Thimbles 185sqmm of standard make |
| 29 | Aluminum Thimbles 240sqmm of standard make |
| 30 | Aluminum Thimbles 400sqmm of standard make |
| 31 | Cotton Tape/ Nawar of standard make |
| 32 | Cork Washers for 250KVA of standard make |
| 33 | Cork Washers for 100KVA & 63KVA |
| 34 | Oil Seals for 250KVA of standard make |
| 35 | Oil Seals for 100KVA & 63KVA of standard make |
| 36 | Cork Sheets |
| 37 | Old Saree/Doti cloth |
| 38 | Insulating Gum of standard make |
| 39 | Aluminum Strip of sizes (3/6, 3/7, 4/8, 4/10mm etc ) of standard make |
| 40 | Solder less Clamp for 630KVA |
| 41 | Solder less Clamp for 400KVA of standard make |
| 42 | Soldress Clamp for 250KVA of standard make |
| 43 | Solder less Clamp for 100KVA & 63KVA |
| 44 | GI Channel Iron X-arm 8\" Long (100x50x6 mm) |
| 45 | GI Channel Iron X-arm 8\" Long (75x40x6 mm) |
| 46 | GI Channel Iron X-arm 5\" Long (75x40x6 mm) |
| 47 | GI Angle Iron Brace 4.5\" Long (50x50x6 mm) |
| 48 | GI V-corss Arm with F Top with back clamps complete @ 15.2kg each |
| 49 | LASet (9 KV ,10 KA ) |
| 50 | 11 kV D O Fuse (polymer )3phase 400A |
| 51 | 11 KV Link Set (polymer) line type (H.D) |
| 52 | 11 KV Link Set (polymer ) (Station Type) |
| 53 | 11 KV Pin Insulator with GI Pins Complete(Polymer) of standard make |
| 54 | LT Shackle Insulator with GI Mukhi Clamps including nuts and bolts. |
| 55 | Manilla Rope |
| 56 | GI Wire |
| 57 | Nuts & Bolts of Sizes with full thread |
| 58 | Transformer Oil (T.Oil) |
| 59 | HT Bush Rod for DTs |
