}

Tender For Construction Of Borewell With Commissioning & Installation Submersible Motors , Nos15, Chennai-Tamil Nadu

Statutory Bodies & Commissions/Committees has published Tender For Construction Of Borewell With Commissioning & Installation Submersible Motors , Nos15. Submission Date for this Tender is 04-07-2024. Bore Well Tenders in Chennai Tamil Nadu. Bidders can get complete Tender details and download the document.




Tender Notice

43731682
Tender For Construction Of Borewell With Commissioning & Installation Submersible Motors , Nos15
Open Tender
Indian
Tamil Nadu
Chennai
04-07-2024

Tender Details

Tender For Construction Of Borewell With Commissioning & Installation Submersible Motors , Nos15 PART A : Electrologging test and borewell yield test 1 Electrologging test of bore to demarcate water bearing zones and ascertating the stariners and blank pipes,cement sealing and quality of water etc. 15 Nos. of Bore wells 2 Conducting borewell yield test through authorised agency by pumping test method and submission of result. Pump test of tube well shall be carried out installing and running of submersible pump of adequate capacity minimum for 12 hrs. Quantity of water availability shall be assertained by constant discharge and step brought down methods as instructed. 12 Bore wells 3 Collection of water samples for chemical analysis in 5Ltrs PVC cans (to be arranged by contractror) including submission of the same for chemical analysis in standard Laboratory and submission of results as per our site engineers instructions for domestic use against IS standard requirements etc complete. 3 Bore wells SUB TOTAL (PART A ) PART B : Drilling of borewells and allied work activities 1 Drilling 250mm dia or above required size bore well in all type of strata by direct rotary rig including cost of bentonite powder, carting of rig etc.Drilling shall be done by mud flush rotary equipment with mud pump. (from 0 meter to 100 Meters) 1500 RM 2 Providing, supplying and singing of 165mm dia, 6kg/cm2, ISI make PVC pipes for borewells at site of work as below: (a) 165mm dia blank pipes 240 RM (b) 165mm dia strainer pipes having slot size 1.5MM TO 3MM depending upon size of aquifer materials. 1760 RM 3 Providing and supplying pebbles of size varying from 3/16 to 5/26 60 Cum 4 Development and flushing of bore well by compressor minimum for 6 to 8 Hrs till sand free discharge. 200 Hrs 165MM PVC pipe cap to cover the bore well till the installation of submercible pumps as required. 40 Nos. Note : The soil samples should be collected every three meters depth bore well or whenever there is change in formation. The discharge is to be measured while cleaning and flushing operation.The change in discharge is to be recorded properly. On completion of bore well the datas have to be submitted. SUB TOTAL (PART B ) PART C : Providing and installing submercible pump with cables & interconnections 1 Providing & installing electrical motor driven submersible pump set for 3 - phase, 5hp with fifteen stages or suitable rated capacity ( for 110 m vertical lift) and suitable capacity of Texmo/ CRI or Equivalent ISI approved make suitable for 150mm ID bore. 9 Set 2 Provding & installing electrical motor driven submersible pump set 3 - phase, 5hp with fifteen stages or suitable rated capacity ( for 110 m vertical lift + 840 m horizontal lead) and suitable capacity of Texmo / CRI or Equivalent ISI approved make suitable for 150mm ID bore. 6 Set 3 Providing laying testing and commissioning of PVC insulated flat cable of ISI approved Finolex or equivalent make of 3 core copper conductor of 4sqmm for submersible pump set indicated in item No:1 and 2 above including necessary clamps with all terminations, supplying and fixing of requisite size of tin plated coppr lugs and crimping/soldering the same to the conductor,both above ground and under ground as per site requirements.Supply and fixing of requisite Nos and sizes cable glands incl. excavation of trench and refilling of soil,providing sand bed ,brcks etc as per site requirements from submercible pump to the controle panel. 2400 RM 4 Providing and laying 50mm ID or suitable dia. Finolex, Astral or equivalent make PVC pipe for submercible pump from pump to the water supply line with required clamp and jointing arrangements etc. as directed. 5 supply and fixing of eader or Zolotto or equivalent make 50 mm dia GM non return valve 15 Nos SUB TOTAL (PART C ) PART D :ELECTRICAL WORKS PANEL BOARD 1 Supply Installation, testing & Commisioning of suitable cubicle type readymade, L&T or HAVELLs or BCH make of starter switch and control panel for controlling submercible pump. 15 Nos. 2 Supply and laying underground PVC pipes Astrol, Finolex or equivalent make 6kg/cm2 including excavation upto depth of 700 to 800mm and back filling, Jointing required and below mentioned accessories 3 5 ID 6kg PVC Pipes 2250 RM 4 3 ID 6kg PVC Pipes 520 RM 5 2 ID 6kg PVC Pipes 200 RM 6 5 Tec 60 Nos 7 5 Elbow 20 Nos 8 5 X 3 Reduser 60 Nos 9 3 6kg PVC Pipes Tee 200 Nos 10 3 Elbow 60 Nos 11 3 Bal valve 100 Nos 12 3 X 2 Reduser 200 Nos 13 2 Tee 20 Nos 14 2 Bal valve 40 Nos 15 2 Air vent valve 40 Nos 16 Solvent 10 Lts

Key Value

Document Fees
Refer document
EMD
Refer document
Tender Value
INR 1.20 Crore /-
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail