Tender For Partition Work At Cisf Jawan Barrack Building, At Rcf Thal., thal-Maharashtra

Tender For Partition Work At Cisf Jawan Barrack Building, At Rcf Thal.; 2 FULL HEIGHT PARTITION: PROVIDING & FIXINGNON-LOAD BEARING, 66MM THICK METAL FRAMED PARTITION WITH 1HOUR FIRE RATING AS PER FOLLOWING SPECIFICATION. MAIN SYSTEM:PARTITION CONSISTS OF GI METAL STUD OF SIZE 48MM OF 0.55MM THICK AND HAVING TWO UNEQUAL FLANGES OF 48 AND 50MM EACHPLACED AT 610MM C/C IN FLOOR AND CEILING CHANNEL OF 50MM, OFMINIMUM 0.45 MM THICK WITH TWO EQUAL FLANGES OF 32MM EACH FIXED TO FLOOR AND CEILING, WITH THE HELP OF NYLON SLEEVES AND WOOD SCREWS AND AT 600 MM C/C (VERTICAL- BETWEEN FLOOR AND CEILING).PROVIDING AND FIXING 08 MM THICKHICEM BOARD / BIDEN BOARS OR EQUIVALENT ON BOTH SIDES OF THE GI METAL FRAME WORK. PLACING 40MMTHICK (DENSITY-48KG/M3) MINERAL WOOLOR ROCKWOOL IN THE CAVITY OF PARTITION AS DIRECTED. METAL STUD FIXING WITH 25MM SELF TAPPING SCREWS AT 200MM CENTRES TO BOTH SIDES OF A COMPOSITE FRAMEWORK.HICEM BOARD SHALL BE FIXED WITH35MM LONG SELF DRILLING AND TAPPING SCREWS HAVING PHILLIPS HEAD WITH UNDER HEAD CUTTER.JOINTING AND FINISHING:THE BOARD’S JOINTS ARE TO BE STAGGERED TO AVOID THROUGH PASSAGE AND FINALLY EDGES OF THE FACING BOARDS ARE TO BE JOINTED AND FINISHED SO AS TO HAVE A SEAMLESS FINISH WHICH INCLUDES FILLING AND FINISHING WITH SPECIALLY FORMULATED JOINTING COMPOUND AND SELF-ADHESIVE FIBRE TAPE. CEMENT PRIMER (OIL BASED) TO BE PROVIDED ON ENTIRE SURFACE BEFORE PUTTY/ PAINTING. NOTE: THE NECESSARY OPENING SHALL BE PROVIDED IN THE PARTITION FOR ELECTRICAL/TELEPHONE CONDUITS & OUTLETS AS PER DESIGN/INSTRUCTIONS. 3 PROVIDING STRUCTURAL STEEL WORK OF HOLLOW STEEL SECTION OF VARIOUS THICKNESS AND SIZES IN SQUARE , RECTANULAR SHAPE FOR STEEL TRUSSES, OTHER SIMILAR TRUSSED ITEMS LIKE PURLIN AND MEMBERS WITH ALL BRACING, GUSSET PLATES ETC OF APPROVED MANUFACTURE. AS PER DETAILED DESIGNS AND DRAWINGS OR AS DIRECTED INCLUDING CUTTING, FABRICATING, HOISTING, ERECTING, FIXING IN POSITION MAKING RIVETED/BOLTED/WELDED CONNECTIONS AND ONE COAT OF ANTICORROSIVE PAINT AND OVER IT TWO COATS OF OIL PAINTING OF APPROVED QUALITY AND SHADE COMPLETE. DRAWING SHALL BE GET APPROVED BEFORE EXECUTION BY EIC. 4 PROVIDING AND APPLYING WASHABLE OIL-BOUND DISTEMPER OF APPROVEDCOLOUR ANDSHADE, MANUFACTURE TO OLD ANDNEWSURFACES IN TWO COATS INCLUDING SCAFFOLDING, PREPARING THE SURFACES. (EXCLUDING THE PRIMER COAT.) ETC. COMPLETEAS DIRECTED BY EIC. 5 PROVIDING AND APPLYING TWO COATS OF SYNTHETIC ENAMEL PAINT OF APPROVED COLOUR, MANUFACTURE TO NEW /OLD STRUCTURAL STEEL WORK AND WOOD WORK IN BUILDINGS, INCLUDING SCAFFOLDING IF NECESSARY, CLEANING AND PREPARING THE SURFACEETC. COMPLETE AS DIRECTION OF EIC.. 6 PROVIDINGAND APPLYINGTWOCOATSOF EXTERIORACRAYLICEMULSION PAINT. OF APPROVED MANUFACTURE AND OF APPROVED COLOUR TO THE PLASTERED SURFACES INCLUDINGCLEANING,PREPARINGTHEPLASTERSURFACE,APPLYINGPRIMERCOAT,SCAFFOLDINGIF NECESSARY ,ETC COMPLETEAS DIRECTED BY EIC. 7 PROVIDING INTERNAL CEMENT PLASTER 12 MM THICK IN A SINGLE COAT USING READY TO USE WALL PLASTER TO CONCRETE OR BRICK SURFACE IN ALL POSITIONS INCLUDING SCAFFOLDING AND CURING COMPLETE. PROVIDING GROOVE AT JOINT OF B.B. MASONRY AND CONCRETE MEMBERS COMPLETEAS DIRECTED BY EIC.A) CEMENT RATIO 1:4 8 PROVIDING AND FIXING MISC. MATERIALS NOT COVERED IN THE SCHEDULE OF RATES INCLUDING TRANSPORTING, LOADING, UNLOADING AT SITE ETCAS DIRECTED BY EIC. (CASH RECEIPT TO BE SUBMITTED). NOTE: VALUE BE PAID OVER BASIC RATE OF CASH MEMO. 9 PROVIDING AND FIXING DRILLING MECHANICAL ANCHOR FASTENERS OF 10MM DIA OF LENGTH AROUND 04 INCH OR AS REQUIRED AS PER SITE CONDITION INTO CONCRETE /RCC / BRICK WORK / BLOCK WORK ETC. AT REQUIRED LOCATION AT ANY HEIGHT AT REQUIRED LOCATION INCLUDING TOOLS AND TACKLES AND SCAFFOLDING ETCAS DIRECTED BY EIC COMPLETE 10 PROVIDING AND APPLYING POLYMER MODIFIED CEMENT MORTAR (PMM) / MICRO CONCRETE JACKETING, RCC REPAIRS, ETC. TO WALLS OF THICKNESS UPTO 75 MM USING POLYMER MODIFIED CEMENT PREMIXED QUARTZ SAND AGGREGATE PACKED IN BAGS OF STANDARD MANUFACTURE, FOR HIGH EARLY STRENGTH OF 40 N /MM SQ.CM OF APPROVED MANUFACTURE. THE DRY PRODUCT IS TO BE MIXED WITH 12.5% WATER BY WEIGHT, ALONG WITH WASHED AND POURED INTO RIGID FORM WORK MOULDS & TAMPED PROPERLY, & CURED FOR 3 DAYS. [PAYMENT IS TO BE MADE BY WEIGHT PREMIXED OF MICRO CONCRETE PRODUCT CONSUMED AS PER SITE REGISTER RECORDS. NO EXTRA PAYMENT SHALL BE MADE FOR SHUTTERING OR ANY OTHER MATERIAL.]

Refer document

INR 35000.0 /-

INR 12.71 Lakhs /-