Annual Rates Contract for Up-keepment / Replacement of impaired parts of Horizontal Centrifugal (H.C) Pump Sets of types Split Casing / Multistage and other allied equipments for smooth running of Tube Wells / Pumping Stations / Dug Wells under the jurisdiction of PHE Mechanical Urban Circle JammuHC Pump Set Split Casing of Specifications 1.5 Lac GPH (Slow Speed). 2 Fabrications and fitting of New Impeller (MOC-S.S) 3 Fabrications and fitting of New Impeller (MOC-C.I) 4 Fabrications and fitting of New Impeller (MOC-Bronze) 5 Reconditioning of impaired impeller 6 Fabrication and fitting of neck /Impeller rings (C.I) 7 Fabrication and fitting of neck /Impeller rings (Gun metal). 8 Providing and fitting of bearing seal/mechanical seal/O-Ring 9 Fabrication and fitting ofnew Pump Shaft including keyways(MOC-S.S) 10 Reconditioning of Pump Shaft (MOC-S.S) including remetalling, turning, and finishing to bearing sizes. 11 Reconditioning of volute Casing. 12 Fabrication and fitting of Bearing Housing along with side cover plates. 13 Reconditioning of Bearing Housing by sleeve fitting and boring for bearing size. 14 Fabrication and fitting of Center Guide. 15 Providing and fitting of Gland along with studs. 16 Providing and fitting of Check Nuts. 17 Fabrication and fitting Shaft Protection Sleeves (MOC-G.M). 18 Fabrication and fitting Shaft Protection Sleeves (MOC-C.I). 19 Providing and fitting of Bearing cover Plate. 20 Providing, fabrication and fitting of Bearing Bracket. 21 HC Pump Set Split Casing of specifications 1.00 Lac GPH(Slow Speed). 22 Fabrications and fitting of New Impeller (MOC-S.S) 23 Fabrications and fitting of New Impeller (MOC-C.I) 24 Fabrications and fitting of New Impeller (MOC- Bronze) 25 Reconditioning of impaired impeller 26 Fabrication and fitting of neck / Impeller rings (C.I). 27 Fabrication and fitting of neck /Impeller rings (Gun metal). 28 Providing and fitting of bearing seal/mechanical seal/O-ring 29 Fabrication and fitting of Pump Shaft (MOC-S.S) 30 Reconditioning of Pump Shaft (MOC-S.S) including remetalling, turning,and finishing to bearing sizes 31 Reconditioning of volute Casing. 32 Fabrication and fitting of Bearing Housing along with side cover plates. 33 Reconditioning of Bearing Housing by sleeve fitting and boring for bearing size. 34 Providing and fitting of Center Guide. 35 Providing and fitting of Gland along with studs. 36 Providing and fitting of Check Nuts. 37 Providing and fitting Shaft Protection Sleeves (MOC-G.M). 38 Providing and fitting Shaft Protection Sleeves (MOC-C.I). 39 Providing and fitting of Bearing cover Plate. 40 Providing, fabrication and fitting of Bearing Bracket. 41 Providing, fabrication and fitting of Lantern ring of stuffing box 42 HC Pump Set Split Casing of specifications (50000-35000) GPH (Slow Speed). 43 Fabrications and fitting of New Impeller (MOC-S.S) 44 Fabrications and fitting of New Impeller (MOC-C.I) 45 Fabrications and fitting of New Impeller (MOC- Bronze) 46 Reconditioning of impaired impeller 47 Fabrication and fitting of neck /Impeller rings (C.I). 48 Fabrication and fitting of neck /Impeller rings (Gun metal). 49 Providing and fitting of bearing seal/mechanical seal/O-ring 50 Fabrication and fitting of Pump Shaft (MOC-S.S) 51 Reconditioning of Pump Shaft (MOC-S.S) including remetalling, turning,and finishing to bearing sizes 52 Reconditioning of volute Casing. 53 Fabrication and fitting of Bearing Housing along with side cover plates. 54 Reconditioning of Bearing Housing by sleeve fitting and boring for bearing size. 55 Fabrication and fitting of Center Guide. 56 Providing and fitting of Gland Bracket along with studs. 57 Providing and fitting of Check Nuts. 58 Providing, fabrication and fitting Shaft Protection Sleeves (MOC-G.M). 59 Providing, fabrication and fitting Shaft Protection Sleeves (MOC-C.I). 60 Fabrication and fitting of Bearing cover Plate. 61 Providing, fabrication and fitting of Bearing Bracket. 62 Providing, fabrication and fitting of Lantern rings of stuffing box 63 HC Pump Set Split Casing of specifications (30000-20000) GPH (Slow Speed). 64 Fabrications and fitting of New Impeller (MOC-S.S) 65 Fabrications and fitting of New Impeller (MOC-C.I) 66 Fabrications and fitting of New Impeller (MOC- Bronze) 67 Reconditioning of impaired impeller 68 Providing and fitting of bearing seal/mechanical seal/O-ring 69 Fabrication and fitting of Pump Shaft (MOC-S.S) 70 Reconditioning of Pump Shaft (MOC-S.S) including remetalling, turning, welding and boring to bearing sizes. 71 Reconditioning of volute Casing. 72 Fabrication and fitting of Bearing Housing along with side cover plates. 73 Reconditioning of Bearing Housing by sleeve fitting and boring for bearing size. 74 Providing, fabrication and fitting of Center Guide. 75 Providing, fabrication and fitting of Gland Bracket along with studs. 76 Providing and fitting of Check Nuts. 77 Fabrication and fitting Shaft Protection Sleeves (MOC-G.M). 78 Fabrication and fitting Shaft Protection Sleeves (MOC-C.I). 79 Providing and fitting of Bearing cover Plate. 80 Providing, fabrication and fitting of Bearing Bracket. 81 Providing, fabrication and fitting of Lantern rings of stuffing box 82 HC Pump Set Multistage of specifications 1.00 Lac GPH. 83 Fabrication and fitting of New Impeller (MOC-S.S) 84 Fabrication and fitting of New Impeller (MOC-C.I) 85 Fabrication and fitting of New Impeller (MOC- Bronze) 86 Reconditioning of impaired impeller 87 Fabrication and fitting of neck/impeller ring (C.I). 88 Fabrication and fitting of neck/impeller ring (Gun metal). 89 Fabrication and fitting of Shaft includingre-metalling, turning, and finishingto bearing size upto 3 stage (MOC-S.S) 90 Fabrication and fitting of Shaft including re-metalling, turning, and finishing to bearing size upto 5 stage (MOC-S.S) 91 Fabrication and fitting of Shaft including re-metalling, turning, and finishing to bearing size upto 8 stage and above (MOC-S.S) 92 Reconditioning of Pump Shaft (MOC-S.S) including re-metalling, turning, welding and boring to bearing size. 93 Fabrication and fitting of Bearing Housing along with side cover plates. 94 Reconditioning of Bearing Housing by sleeve fitting and boring for bearing size. 95 Providing and fitting of oil/Mechanical Seal/O-ring. 96 Fabrication and fitting of Check Nuts. 97 Providing, fabrication and fitting of Shaft Protection Sleeves (MOC-S.S). 98 Providing, fabrication and fitting of Shaft Protection Sleeves(MOC-C.I). 99 Fabrication and fitting of Shaft Protection Sleeves (MOC-Brass). 100 Fabrication and fitting of Bearing cover Plate. 101 Providing and fitting of Gland along with studs. 102 Fabrication and Fitting of stuffing Box. 103 Repairs of stuffing Box. 104 Fabrication and Fitting of Diffuser.(C.I) 105 Reconditioning of Diffuser. 106 Fabrication and Fitting of Diffuser Bushes. 107 Providing and Fitting of Disc Plate (G.M) 108 Providing and Fitting of Thrust Plate (G.M) 109 Fabrication and fitting of Brass bearing bush. 110 Providing and Fitting of Flushing/Cooling pipe. 111 Providing, fabrication and fitting of Bearing Bracket. 112 Providing, fabrication and fitting of Lantern rings of stuffing box 113 HC Pump Set Multistage of specifications (50000-30000) GPH. 114 Fabrication and fitting of New Impeller (MOC-S.S) 115 Fabrication and fitting of New Impeller (MOC-C.I) 116 Fabrication and fitting of New Impeller (MOC- Bronze) 117 Reconditioning of impaired impeller. 118 Fabrication and fitting of neck/impeller ring (C.I). 119 Fabrication and fitting of neck/impeller ring (Gun metal). 120 Fabrication and fitting of new pump Shaft including keyways, re-metalling, turning, and finishing to bearing size upto 3 stage (MOC-S.S) 121 Fabrication and fitting of Shaft including re-metalling, turning, and finishing to bearing size upto 5 stage (MOC-S.S) 122 Fabrication and fitting of new pump Shaft including re-metalling, turning, and finishing to bearing size upto 8 stage and above (MOC-S.S) 123 Reconditioning of Pump Shaft (MOC-S.S) including remetalling, turning, welding and boring to bearing size. 124 Fabrication and fitting of Bearing Housing along with side cover plates. 125 Reconditioning of Bearing Housing by sleeve fitting and boring for bearing size. 126 Providing and fitting of oil/Mechanical Seal/O-ring. 127 Fabrication and fitting of Check Nuts. 128 Providing and fitting Shaft Protection Sleeves (MOC-S.S). 129 Providing and fitting Shaft Protection Sleeves (MOC-C.I). 130 Providing and fitting Shaft Protection Sleeves (MOC-Brass). 131 Fabrication and fitting of Bearing cover Plate. 132 Providing and fitting of Gland plate along with studs. 133 Fabrication and Fitting of stuffing Box. 134 Repairs of stuffing Box. 135 Fabrication and Fitting of Diffuser. 136 Reconditioning of Diffuser. 137 Fabrication and Fitting of Diffuser Bushes. 138 Providing and Fitting of Disc Plate (G.M) 139 Providing and Fitting of Thrust Plate (G.M) 140 Fabrication and Fitting of Gland 141 Fabrication and fitting of Brass bearing bush. 142 Providing and Fitting of Flushing/Cooling pipe. 143 Providing, fabrication and fitting of Bearing Bracket. 144 Providing, fabrication and fitting of Lantern rings of stuffing box 145 Providing, fabrication and fitting of Lantern rings of stuffing box 146 HC Pump Set Multistage of specifications (25000-12000) GPH. 147 Fabrication and fitting of New Impeller (MOC-S.S) 148 Fabrication and fitting of New Impeller (MOC-C.I) 149 Fabrication and fitting of New Impeller (MOC- Bronze) 150 Reconditioning of impaired impellerby re-metalling, turning, and finishing to bearing size (MOC-S.S) 151 Fabrication and fitting of neck/impeller ring (C.I). 152 Fabrication and fitting of neck/impeller ring (Gun metal). 153 Fabrication and fitting of new Pump-Shaft including re-metalling, turning, and finishing to bearing size upto 3 stage (MOC-S.S) 154 Fabrication and fitting of Shaft including re-metalling, turning, and finishing to bearing size upto 5 stage (MOC-S.S) 155 Fabrication and fitting of Shaft including re-metalling, turning, and finishing to bearing size upto 8 stage and above (MOC-S.S) 156 Reconditioning of Pump Shaft (MOC-S.S) including re-metalling, turning, and finishing and boring to bearing size. 157 Fabrication and fitting of Bearing Housing along with side cover plates. 158 Reconditioning of Bearing Housing by sleeve fitting and boring for bearing size. 159 Fabrication and fitting of Check Nuts. 160 Providing, fabrication and fitting Shaft Protection Sleeves (MOC-S.S). 161 Providing, fabrication and fitting of Shaft Protection Sleeves (MOC-C.I). 162 Providing and fitting Shaft Protection Sleeves (MOC-Brass). 163 Fabrication and fitting of Bearing cover Plate. 164 Providing and fitting of Gland along with studs. 165 Fabrication and Fitting of stuffing Box. 166 Repairs of stuffing Box. 167 Fabrication and Fitting of Diffuser. 168 Reconditioning of Diffuser. 169 Fabrication and Fitting of Diffuser Bushes. 170 Providing and Fitting of Disc Plate (G.M) 171 Providing and Fitting of Thrust Plate (G.M) 172 Fabrication and Fitting of Gland 173 Fabrication and fitting of Brass bearing bush. 174 Providing and Fitting of Flushing/Cooling pipe. 175 Providing, fabrication and fitting of Bearing Bracket. 176 Providing, fabrication and fitting of Lantern rings of stuffing box 177 HC Pump Set Multistage of specifications (10000-6000) GPH. 178 Fabrication and fitting of New Impeller (MOC-S.S) 179 Fabrication and fitting of New Impeller (MOC-C.I) 180 Fabrication and fitting of New Impeller (MOC- Bronze) 181 Reconditioning of impaired Impeller. 182 Fabrication and fitting of neck/impeller ring (C.I). 183 Fabrication and fitting of neck/impeller ring (Gun metal). 184 Fabrication and fitting of Shaft including re-metalling, turning, and finishing to bearing size upto 3 stage (MOC-S.S) 185 Fabrication and fitting of Shaft including re-metalling, turning, and finishing to bearing size upto 5 stage (MOC-S.S) 186 Fabrication and fitting of Shaft including re-metalling, turning, and finishing to bearing size upto 8 stage and above (MOC-S.S) 187 Reconditioning of Pump Shaft (MOC-S.S) including re-metalling, turning, and finishing to bearing size. 188 Fabrication and fitting of Bearing Housing along with side cover plates. 189 Reconditioning of Bearing Housing by sleeve fitting and boring for bearing size. 190 Fabrication and fitting of Check Nuts. 191 Providing and fitting Shaft Protection Sleeves (MOC-S.S). 192 Providing and fitting Shaft Protection Sleeves (MOC-C.I). 193 Providing and fitting Shaft Protection Sleeves (MOC-Gun metal). 194 Fabrication and fitting of Bearing cover Plate. 195 Providing and fitting of Gland along with studs. 196 Fabrication and Fitting of stuffing Box. 197 Repairs of stuffing Box. 198 Fabrication and Fitting of Diffuser. 199 Reconditioning of Diffuser. 200 Fabrication and Fitting of Diffuser Bushes. 201 Providing and Fitting of Disc Plate (G.M) 202 Providing and Fitting of Thrust Plate (G.M) 203 Fabrication and Fitting of Gland 204 Fabrication and fitting of Brass bearing bush. 205 Providing and Fitting of Flushing/Cooling pipe. 206 Providing, fabrication and fitting of Bearing Bracket. 207 Providing, fabrication and fitting of Lantern rings of stuffing box 208 HC Pump Set Multistage of specifications (5000-2000) GPH. 209 Fabrication and fitting of New Impeller (MOC-S.S) 210 Fabrication and fitting of New Impeller (MOC-C.I) 211 Fabrication and fitting of New Impeller (MOC-Bronze) 212 Reconditioning of impaired impeller 213 Fabrication and fitting of neck/impeller ring (C.I). 214 Fabrication and fitting of neck/impeller ring (Gun metal). 215 Fabrication and fitting of new pump Shaft including re-metalling, turning, and finishing to bearing size upto 3 stage (MOC-S.S) 216 Fabrication and fitting of new pump Shaft including re-metalling, turning, and finishing to bearing size upto 5 stage (MOC-S.S) 217 Fabrication and fitting of new pump Shaft including re-metalling, turning, and finishing to bearing size upto 8 stage and above (MOC-S.S) 218 Reconditioning of Pump Shaft (MOC-S.S) including re-metalling, turning, and finishing to bearing size. 219 Fabrication and fitting of Bearing Housing along with side cover plates. 220 Reconditioning of Bearing Housing by sleeve fitting and boring for bearing size. 221 Fabrication and fitting of Check Nuts. 222 Providing and fitting Shaft Protection Sleeves (MOC-S.S). 223 Providing and fitting Shaft Protection Sleeves (MOC-C.I). 224 Providing and fitting Shaft Protection Sleeves (MOC-Gun metal). 225 Fabrication and fitting of Bearing cover Plate. 226 Providing and fitting of Gland along with studs. 227 Fabrication and Fitting of stuffing Box. 228 Repairs of stuffing Box. 229 Fabrication and Fitting of Diffuser. 230 Reconditioning of Diffuser. 231 Fabrication and Fitting of Diffuser Bushes. 232 Providing and Fitting of Disc Plate (G.M) 233 Providing and Fitting ofthrust Plate (G.M) 234 Fabrication and Fitting of Gland 235 Fabrication and fitting of Brass bearing bush. 236 Providing and Fitting of Flushing/Cooling pipe. 237 Providing, fabrication and fitting of Bearing Bracket. 238 Providing, fabrication and fitting of Lantern rings of stuffing box 239 Miscellaneous /Sundry items. 240 Replacement of bearings of 500KW/670 HP HT Motor and allied works installed at HT Pump house Sitlee. Job includes disconnecting of all the electric connections of the motors, dismantling the coupling pulleys of the pump and motor, demounting motor from the base frame. Dismantling of side covers of motor of drive end (DE) and non drive end (NDE). Extracting out the rotor from the stator, damaged/worn out bearings from the rotor shaft with the help of cutter/ puller and other tools and tackles. Providing and fitting of bearings NU -224M, 6224 C3 at DE and NU-222M at NDE and fitting of bearing housing after greasing the same properly. Fabrication and Fitting of coupling pulley set along with coupling bolts and rubber bushes. Aligning of motor and pump properly. Remaking of all the disconnected electric connections and testing on full load. The job includes cost of material, labour charges and carriage to & fro. 241 Repair to the bearing housing DE and NDE by way of fabrication and fitting of bearing housing sleeves of 670HPHT Motor. 242 Fabrication and Fitting of coupling pulley set, aligning of motor and pump properly on the base frame, providing and fitting of coupling bolts along with rubber bushes of 670 HT motor and testing thereof. 243 Providing and Fitting of Coupling Pulley set along with rubber bushes(C.I)- 200mm 244 Providing and Fitting of Coupling Pulley set along with rubber bushes(C.I)- 100mm 245 Providing and Fitting of Coupling Pulley set along with rubber bushes(C.I)- 250mm. 246 Providing and Fitting of Coupling Pulley set along with rubber bushes(C.I)- 300mm. 247 Providing and Fitting of Gland Packing per kg. 248 Providing and Fitting of Coupling Bush along with Bolts – 10mm. 249 Providing and Fitting of Coupling Bush along with Bolts – 12mm. 250 Providing and fitting of copper Submersible cable 3core along with Thimbles. 251 Providing and Fitting of Coupling Bush along with Bolts – 16mm. 252 Providing and Fitting of Coupling Bush along with Bolts – 18mm. 253 Providing and Fitting of Coupling Bush along with Bolts – 20mm. 254 Providing and Fitting of Coupling Bush along with Bolts – 25mm. 255 Providing and Fitting of Coupling Bush along with Bolts – 30mm. 256 Providing and Fitting of Coupling Bush along with Bolts – 35mm. 257 Providing and Fitting of Star Coupling pulley set along with star rubber – L 150. 258 Providing and Fitting of Star Coupling pulley set along with star rubber – L190. 259 Providing and Fitting of Star Coupling pulley set along with star rubber – L226. 260 Providing and Fitting of Star Coupling pulley set along with star rubber – L276. 261 Providing and Fitting of Star Coupling pulley set along with star rubber – L295. 262 Providing and Fitting of carbon bush forslip ring motors upto 150HP 263 Providing and Fitting of carbon bush for slip ring motors from 151HP to400HP 264 Providing and Fitting of carbon bush for 188 HP slip ring motors upto 500 HP and above 265 Providing and Fitting of carbon bush for 670 HP HT motors 266 Providing and Fitting of slip ring assemblyupto 150 HP 267 Providing and Fitting of slip ring assembly ofslip ring motors from 151HP to 400HP 268 Providing and Fitting of slip ring assemblyfor 670 HP HT motors 269 Providing and Fitting of carbon brush holderfor 170 HP slip ring motors 270 Providing and Fitting of carbon brush holderfor 171HP to 400 HP slip ring motors 271 Providing and Fitting of carbon brush holderfor 401 HP and aboveslip ring motors 272 Providing and Fitting of carbon brush holderfor 670 HP HT motors 273 Reconditioning of motor shaft along with side covers of HC motorupto 50 HP 274 Reconditioning of motor shaft along with side covers of HC motor from 51HP to 100HP 275 Reconditioning of motor shaft along with side covers of HC motor from101HP to 200 HP 276 Reconditioning of motor shaft along with side covers of HC motor from201HP to 400HP 277 Reconditioning of motor shaft along with side covers of HC motor from401 HP and above 278 Replacement of damaged valve by way of Providing and fitting of sluice valve 50mm dia. (C.I) along with flanges 279 Replacement of damaged valve by way of Providing and fitting of sluice valve 65mm dia. (C.I) along with flanges 280 Replacement of damaged valve by way of Providing and fitting of sluice valve 100mm dia. (C.I) along with flanges 281 Replacement of damaged valve by way of Providing and fitting of sluice valve 150mm dia. (C.I)along with flanges 282 Replacement of damaged valve by way of Providing and fitting of sluice valve 200mm dia. (C.I) along with flanges 283 Replacement of damaged valve by way of Providing and fitting of reflex valve 50mm dia. (C.I)along with flanges 284 Replacement of damaged valve by way of Providing and fitting of reflex valve 65mm dia. (C.I)along with flanges 285 Replacement of damaged valve by way of Replacement of damaged valve by way of Providing and fitting of reflex valve 100mm dia. (C.I)along with flanges 286 Replacement of damaged valve by way of Providing and fitting of reflex valve 150mm dia.(C.I)along with flanges 287 Replacement of damaged valve by way of and fitting of reflex valve 200mm dia. (C.I)along with flanges 288 Replacement of Foot valve by way of Providing and fitting of Foot Valve of dia.50mm dia. (C.I)along with flanges 289 Replacement of Foot valve by way of Providing and fitting of Foot Valve of dia.65mm dia. (C.I)along with flanges 290 Replacement of Foot valve by way of Providing and fitting of Foot Valve of dia.80mm dia. (C.I)along with flanges 291 Replacement of Foot valve by way of Providing and fitting of Foot Valve of dia.100mm dia. (C.I)along with flanges 292 Replacementof Footvalve by way of Providing and fitting of Foot Valve of dia. 150mm dia. (C.I)along with flanges 293 Providing and fitting of Air-release valve (1/4)inch 294 Providing and fitting of Ballbearing 6224 C3 295 Providing and fitting of Roller bearings NU-222M 296 Providing and fitting of cylindrical roller bearing NU -224M. 297 Providing and Fitting of Ball bearing-6302. 298 Providing and Fitting of Ball bearing-6304. 299 Providing and Fitting of Ball bearing-6305. 300 Providing and Fitting of Ball bearing-6306. 301 Providing and Fitting of Ball bearing-6307. 302 Providing and Fitting of Ball bearing-6309. 303 Providing and Fitting of Ball bearing-6310. 304 Providing and Fitting of Ball bearing-6311. 305 Providing and Fitting of Ball bearing-6312. 306 Providing and Fitting of Ball bearing-6313. 307 Providing and Fitting of Ball bearing-6314. 308 Providing and Fitting of Ball bearing-6316. 309 Providing and Fitting of Ball bearing-6317. 310 Providing and Fitting of Ball bearing-6318. 311 Providing and Fitting of Ball bearing-6319. 312 Providing and Fitting of Ball bearing-6320. 313 Providing and Fitting of Ball bearing-6321. 314 Providing and Fitting of Ball bearing-6322. 315 Providing and Fitting of Ball bearing-6324 316 Providing and Fitting of Ball bearing-6203. 317 Providing and Fitting of Ball bearing-6204. 318 Providing and Fitting of Ball bearing-6205. 319 Providing and Fitting of Ball bearing-6206. 320 Providing and Fitting of Ball bearing-6207. 321 Providing and Fitting of Ball bearing-6208. 322 Providing and Fitting of Ball bearing-6210. 323 Providing and Fitting of Ball bearing-6211. 324 Providing and Fitting of Ball bearing-6213. 325 Providing and Fitting of Ball bearing-6214. 326 Providing and Fitting of Ball bearing-6215. 327 Providing and Fitting of Ball bearing-6216. 328 Providing and Fitting of Ball bearing-6218. 329 Providing and Fitting of Ball bearing-6221. 330 Providing and Fitting of Ball bearing-6222. 331 Providing and Fitting of thrust ball bearing-7304. 332 Providing and Fitting of thrust ball bearing-7305. 333 Providing and Fitting of thrust ball bearing-7307. 334 Providing and Fitting of thrust ball bearing-7309. 335 Providing and Fitting ofthrust ball bearing-7310. 336 Providing and Fitting of thrust ball bearing-7311. 337 Providing and Fitting of thrust ball bearing-7313. 338 Providing and Fitting of thrust ball bearing-7316. 339 Providing and Fitting of Cylindrical Roller bearing-NU304. 340 Providing and Fitting of Cylindrical Roller bearing-NU305. 341 Providing and Fitting of Cylindrical Roller bearing-NU307. 342 Providing and Fitting of Cylindrical Roller bearing-NU310. 343 Providing and Fitting of Cylindrical Roller bearing-NU311. 344 Providing and Fitting of Cylindrical Roller bearing-NU313. 345 Providing and Fitting of Cylindrical Roller bearing-NU315. 346 Providing and Fitting of Cylindrical Roller bearing-NU318. 347 Providing and Fitting of Cylindrical Roller bearing-NU322. 348 Providing and Fitting of Cylindrical Roller bearing-NU324. 349 Providing and Fitting of Cylindrical Roller bearing-NU204. 350 Providing and Fitting of Cylindrical Roller bearing-NU205. 351 Providing and Fitting of Cylindrical Roller bearing-NU207. 352 Providing and Fitting of Cylindrical Roller bearing-NJ210. 353 Providing and Fitting of Cylindrical Roller bearing-NJ211. 354 Providing and Fitting of Roller bearing-NU213. 355 Providing and Fitting of Roller bearing-NU215. 356 Providing and Fitting of Roller bearing-NU218. 357 Providing and Fitting of Roller bearing-NU222. 358 Providing and Fitting of Roller bearing-NU224. 359 Providing and Fitting of Roller bearing-NU413. 360 Providing and Fitting of Roller bearing-NU414. 361 Providing and Fitting of ball bearing-7209. 362 Providing and Fitting of bearing-7210. 363 Providing and Fitting of bearing-7211. 364 Providing and Fitting of bearing-7212. 365 Providing and Fitting of bearing-7218. 366 Labor and transportation charges of HC Pump / motor to workshop from sites in the range (0-20) km after decoupling, disengaging from suction /delivery side and demounting from base frame / foundation block. Loading the same into the mechanical transport by using labor/crane, carriage to workshop, unloading and repairing etc. 367 Labor and transportation charges of HC Pump / motor to workshop from sites in the range (0-20) km after decoupling, disengaging from suction /delivery side and demounting from base frame / foundation block. Loading the same into the mechanical transport by using labor/crane, carriage to workshop, unloading and repairing etc. 368 Labor and transportation charges of HC Pump / motor to workshop from sites in the range 21 km or above after decoupling, disengaging from suction /delivery side and demounting from base frame / foundation block. Loading the same into the mechanical transport by using labor/crane, carriage to workshop, unloading and repairing etc. 369 Labor charges for shifting of HC pump / motor from pumping station to workshop by opening of nuts and bolts from base frame, disconnecting the LT cable connections then demounting from base-frame. Shifting the pumping unit outside from pumping station by using labor / crane. Loading into the departmental vehicle by using labour / crane and then carriage to workshop, unloading & repairing etc. 370 Dismantling of HC pump / motor at workshop for its repair by segregation of parts using skilled labor and tools / tackles and checking for proper estimation / repairs. 371 Carriage of HC pump / motor to site in the range (0-20 km) for installation & testing after assembling the parts of pump / motor. Job includes loading the same into the mechanical transport then unloading at site by using labor/crane, shifting properly to foundation block for mounting on base frame, coupling the pump-motor, making its alignment ,fitting of suction /delivery lines, making proper electrical connections, priming the HC pump set & suction lineand then testing on full load at site. 372 Carriage of HC pump / motor to site in the range beyond 21 km for installation & testing after assembling the parts of pump / motor. Job includes loading the same into the mechanical transport then unloading at site by using labor/crane, shifting properly to foundation block for mounting on base frame, coupling the pump-motor, making its alignment, fitting of suction /delivery lines, making proper electrical connections, priming the HC pump set & suction line and then testing on full load at site. 373 Labor charges for installation and testing of HC pump / motor after repairing at workshop. Job includes assembling of pump / motor & then loading the same into the departmental vehicle. Thereafter, unloading at site then shifting properly to foundation block for mounting the same on the base frame, making proper alignment, coupling of pump-motor set ,fitting of suction /delivery lines, making proper electrical connections, priming the HC pump set & suction line and then testing on full load at site. 374 Charges on account of site visit by the mechanic / fitter in the range (0-20) Km for replacement of damaged bearings of pump / motor. After replacement, making proper alignment, coupling, and testing on full load at site. 375 Charges on account of site visit by the mechanic / fitter in the range beyond 21 Km for replacement of damaged bearings of pump / motor. After replacement, making proper alignment, coupling, and testing on full load at site.
