Tender For installation of 5 Ton Wet Waste Processing (Pit Composting) Unit under swatch bharat mission, 1 Surface Dressing of ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil. 2 Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge 2.1.1. All kinds of soil. 3 Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5KM also including ramming and watering of the earth in layers not exceeding 20cm in trenches, plinth, sides of foundation etc. complete 4 Providing & Laying of C.C.in 1:4:8 with c/s and 40 mm G.S.B. in foundation of Floor i/call labour ,materials and T&P etc. 5 R.C.C. workin column 1:2:4 with cement , coarse sand, 20 mm gauge stone grit I/c all complete 6 M150 Brick Work in 1:4c/s mortar in sub-structure i/c all labour & T&P etc. 7 12 mm thk Internal Plaster in 1:3 withc/s mortar in wall i/c all materials, labour & T&P etc. S.I-586 8 M.S.Iron work in plain work such as R.C.C. Work I/c all complete 9 M.S.iron Door and window with ms angle and ms sheet I/c all complete as directed by engineer in charge as chapter 10 S.i no 503 10 Mild steel or iron work in heavy size such as trusses, build up gates record racks, roof work, gates etc wrought to required from including drilling holes riveting or welding where necessary and their fixing required for proper completion of the work. 11 Mild steel or iron work of small size and sections such as holding down bolts, hold fast, tie rods, grating etc,(when not included in an overall rates) wrought to required shape as necessary for bending etc including supply of steel and its wastage including cost of bolts, nuts if required, welding, grinding and making holes as required for completion of work but 12 Providing and fixing precoated galvanised iron sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.630 mm (+0.05%) total coated thickness with zinc coating 120 grams per sqm as per IS:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (55x55mm) with EPDM seal, complete upto any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required 13 Providing and laying rectified Glazed Ceramic floor tiles of size 300 x 300 mm or more ( thickness to be specified by the manufacturer), of 1st quality conforming to IS: 15622, of approved make, in colours white, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 ( 1 Cement: 4 Coarse Sand), jointing with slurry white cement and matching pigments etc, complete 14 Providing and laying rectified Glazed Ceramic floor tiles of size 300 x 300 mm or more ( thickness to be specified by the manufacturer), of 1st quality conforming to IS: 15622, of approved make, in all colours, shades, exceptwhite, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 ( 1 Cement: 4 Coarse Sand), jointing with slurry white cement and matching pigments etc, complete 15 Distepering(First coat) with oil bound distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with cement primer of approved brand and manufacture such as Berger, J & N Shalimar, Asian Paints after thoroughly brushing the surface free from mortar dropping and other foreign matter and also including prepairing the surface even with Plaster Plaster of Paris or approved approved synthetic synthetic material and sand papered smooth including cost of all materials. 16 Painting of wood or iron work including sand preparing rubbing and cleaning as reuired for proper completion of work (two coats) 17 Painting or Varnishing on iron works in small areas or new wood work with one coat of ready mixed priming paint & one coat of approved supperior quality ready mixed paint of clear synthetic varnish including supply of all materials, labour and t&P etc. required for proper completion of the work paint to be used should confirm to the I.S.I No. 103 18 Providing and applying putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete 19 Supply and fixing 32mm thick flush door all complete fitting 20 Supply and fixing aluminium flush door all complete fitting bathroom and Latrin 32mm thick flush door all complete fitting 21 Supply and fixing 32 mm thick flush door ply wood with handle fitting all complete 22 Wiring point for light with 1.5 sq. mm. PVC insulated single core aluminium conductor cable in heavy guage rigidsteel conduit pipe on surface, complete with 8 SWG GI earth continuity wire, piano type switch and ceilingrose/angle/ batten holder on 3 mm. thick phenolic laminated backelite-sheet etc. complete in all respect, as 23 Wiringpoint for fan /fresh air fan (lightduty exhaustfan) with 1.5 sq.mm PVC insulated single core aluminium conductor cable in heavy guage rigidsteel conduit pipe on surface, complete with 8 SWG GI earth continuity wire, piano type switch & ceilingrose on 3 mm. thick phenolic laminated backelite sheet etc, complete in all, as directed 24 Wiring Point for plug with 1.5 sq. mm. PVC insulated single core aluminiumconductor cable in heavy guage rigidsteel conduit pipe on surface, complete with 8 SWG GI earth continuity wire and piano type switch and socket etc. complete in all respect. 25 S/F of 18w hewells make all fitting complete MR 26 S/F of LED 12w hewells make all fitting complete MR 27 Septic tank of appropriate capacity for 2 years cleaning interval for 50 users 28 S/F of low density polythene seamless one piece moulded tank and placing the same in proper position includding all 29 Providing and fixing GI/PVC pipe all fitting 30 Providing and fixing sanitary pipe all fitting 31 Providing and fixing WC pan median type with cast iron P and S trap all complete with automatic flushing 32 Supply and fixing 25mm PVC pipe in position all complete 33 Supply and fixing 25mm PVC pipe in position all complete 34 Supply and fixing 30 mm dia socket 35 200 mm dia drilling and 350 mm dia running from ground level to 50 m below ground level in alluvial soil up to sand strata 36 Supply and lowering of 150 mm dia PVC plain casing pipe 37 Supply and fixing of 150 mm dia End Cap 38 Supply and fixing of 150 mm dia Top Cap 39 Supply and fixing of 150 mm dia Centerlizer 40 P/F 550X400mm hand wash basin of white glazed earthen ware ISI marked (Hindustan neyer cera make ) i/c supply of all materials labour and t&p comp. 41 P/F flat back 465 mm x 355 mm x 265 mm size lipped from uninal basin of white glazed earther were first quality (Hindustan Nycer Make) S.I. mark S I No 304 42 P/F polyvinyl chloride (CPVC) pipe 20mm dia 43 P/F polyvinyl chloride (CPVC) pipe 15mm dia 44 P/F bib brass bib cock 400 gms i/c all 45 Making water connection of GI pipe line with GI main as inSI 210 46 PVC low level cisterns 10 ltr capasity with all internal fittins of PVC etc. 47 Handpump with submercible
