Tender For Maintenance Of S.T.P (Providing And Laying Treated Water Pipe Line For Irrigation Purpose In Sec-22) Noida, 1 Dismantling Manually/ By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within , noida-Uttar Pradesh

Tender For Maintenance of S.T.P (Providing And Laying Treated Water Pipe Line For Irrigation Purpose In Sec-22) Noida, 1 Dismantling manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50metres lead as per direction of E/I :bituminous road 2 Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, inlayers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil , The Contractor has to detect different utilities like sewer line, water supply line, Electric cable, Telephone cable, Gas Pipe line etc. using utility detecting machine before start of excavation and shall start excavation only after getting permission of Engineer in Charge All kinds of soil. Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. 3 P/L following size of finolex makes PVC pipes 6Kg/Cm² with required PVC standard special confirming to IS codes with latest amendment and lowering the same trenches and laying true to alignment and gradient complete i/c the cost ofcutting of pipes for making up to length and making joints i.c cost of socket. plstochem PV-85 PVC solvent cement complete. PVC pipe must be confirming to IS: 4985-2000 with latest amendment make-Finolex Industries Ltd./Kishan/Supermelndustries Ltd. as per approved by Engineer in charge. 90 mm dia with coupler @ 6 Kgf/Cm2 Pressure 4 200 mm dia with coupler @ 6 Kgf/Cm2 Pressure 5 Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : II Class150 mm diameter 6 Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : II Class200 mm diameter 7 Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 100 8 Supply and installation of required size Steel pipe 8 mm thick confirming to IS:3589 through trenchless excavation of thrust pit and receiving pit of required size and the excavation & filling back and compaction complete as per specification for road crossing by Auger boring method. Pipe will be installed at depth beyond 3below the ground surface in downward required slope .200 mm dia 9 P/F M.S. specials such as Tee , Bends , Collars , Tapers, Gap pieces,including Flange Ends as required , Painting ,Cutting, weldingas per site requirement of MSpipe thickness etc complete in all respect as per direction of E/I. 10 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.25 mm nominal bore 11 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 12 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)25 mm nominal bore 13 Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main 25 mm nominal bore 14 Hiring of Gas cutting Set With oxygenAnd LPG Running Time @ 6 Hrs 15 Hiring of WeldingSet Running Time @ 6 Hrs 16 Hire charge of Generator ( Including cost Service of operating staff, supply of lubricating oil and diesel also) D G Set /Generator 63 KVA 17 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

INR 1416 /-

INR 26300.0 /-

INR 13.10 Lakhs /-