|
| 1 | LT brass bush rod with double nuts and washers 12 mm |
| 2 | LT brass bush rod with double nuts and washers 19 mm |
| 3 | HT brass bush rods with double nutts and washers including brass cup and oil seel washer |
| 4 | 11 kV HT bushing for x-mers conforming to IS 2009, 3347 |
| 5 | LTbushing complete with bush cup suitable for:-12 mm bush rod |
| 6 | LTbushing complete with bush cup suitable for:-16 mm bush rod |
| 7 | LTbushing complete with bush cup suitable for:-19 mm bush rod |
| 8 | DPC Aluminium Wire of sizes 12, 14,16 and 18 SWG (Against Almn. Scrap of 1 Kg Wire supplied) |
| 9 | DPC Almn. Wire 18,16,14,12 SWG conforming to relevant IS |
| 10 | DPC Cu. Wire 18,16,14,12 SWG conforming to relevant IS (Against Cu. Scrap of 1 Kg Wire supplied) |
| 11 | DPC Cu. Wire 18,16,14,12 SWG conforming to relevant IS |
| 12 | Super enamelled Almunium Wire of sizes 13,14,16 and 18 SWG (Against Almn. Scrap of 1 Kg Wire supplied) |
| 13 | Super enamelled Almn. Wire 13,14,16,18 SWG conforming to relevant IS. |
| 14 | Cotton tape roll 100 ft long of standard quality. 1\" width |
| 15 | Cotton tape roll 100 ft long of standard quality. 1. ½\" width |
| 16 | Joining sleaves of standard quality 3 mm dia |
| 17 | Joining sleaves of standard quality 5 mm dia |
| 18 | Joining sleaves of standard quality 8 mm dia |
| 19 | Ruberised washers of standard quality suitable for:- 12 mm bush rods |
| 20 | Ruberised washers of standard quality suitable for:- 16 mm bush rods |
| 21 | Ruberised washers of standard quality suitable for:- 19 mm bush rods |
| 22 | Cork Washer of Sizes |
| 23 | cork sheets conforming to relevant IS. 2\"x3\"x4 mm thick |
| 24 | cork sheets conforming to relevant IS. 2\"x3\"x6 mm thick |
| 25 | Cork washers (5 mm thick) suitable for 11 KV bushing. |
| 26 | Cork washers (5 mm thick) suitable for 12mm LT bushing |
| 27 | Cork washers (5 mm thick) suitable for 16mm LT bushing |
| 28 | Cork washers (5 mm thick) suitable for 19mm LT bushing |
| 29 | Bakelite tubes of sizes standard quality 1 mtr long. 6 mm Dia |
| 30 | Bakelite tubes of sizes standard quality 1 mtr long. 10 mm Dia |
| 31 | Bakelite tubes of sizes standard quality 1 mtr long.12 mm Dia |
| 32 | HT kraft paper 2/3 mil conforming to relevant IS |
| 33 | Hard card board (press board) conforming to IS 1576. |
| 34 | lathorid paper conforming to relevant IS. |
| 35 | Silica gel breathers suitiable for 63-400 KVA x-mer |
| 36 | Silica gel in sealed containers (packing of 20 Kgs) |
| 37 | Cotton Dhoti cloth. (un-stained) |
| 38 | Galvanised clamps for 11 KV transformer bushes conforming to IS 4257. |
| 39 | LT Almn. Strips of sizes ( Electrolytic grade) |
| 40 | Fevicol adhesive |
| 41 | Insulating gum. |
| 42 | Enamel paint gray colour (Nerolac, Asian, Berger make) |
| 43 | Bobin sheets standard quality |
| 44 | Varnish standard quality |
| 45 | Transformer oil make true oil/HP/BP/IOC/Power oil |
| 46 | Transformer oil make true oil/HP/BP/IOC/Power oil excluding the cost of barrel (Note: Empty barrel to be returned back to gthe supplier) |
| 47 | M.Seal of standard quality |
| 48 | Body solder (Car Patch) of standard make |
| 49 | Heating Elements (ceramic) 1 KW |
| 50 | Heating Elements (ceramic) 2 KW |
| 51 | Heating Elements (ceramic) 3 KW |
| 52 | Heating Elements tubular type U shaped (ceramic) 1.5 KW |
| 53 | Heating Elements tubular type U shaped (ceramic) 2 KW |
| 54 | Winding of DPC Aluminium for HT coils of 63/100/250 KVA Transformers (material will be supplied by the department) |
| 55 | Re-winding of LT Aluminium coils of 63/100/250 KVA Transformers |
| 56 | Oil filling pump mannual 1.25 inch dia |
| 57 | Three phase 2 HP motor (Crompton/Usha make) |
| 58 | Bosch GSB Plastic 550W Corded Electric Mechanic Kit Professional Drill |
| 59 | Supply of Oil seal for bush road purpose |
| 60 | Supply of wooden (Farma) for LT winding purpose for 250 kVA Transformer. |
| 61 | Supply of wooden (Farma) for LT winding purpose for 100 kVA Transformer. |
| 62 | Supply of wooden (Farma) for LT winding purpose for 63 kVA Transformer. |
| 63 | Supply of wooden (Farma) of sizes for HT winding purpose for 100-400 kVA Transformer. |
| 64 | supply of PVC solid sheets Heatinsulated 1220mmx2440mm thickness 3mm to 40mm (Polyvinl). |
| 65 | supply of Almunium joint breezing point. |
| 66 | Tension(Breaker) for LT Winding Machine |
| 67 | C Clampsfor LT Winding Machine |
| 68 | Corded Impact Wrench of Bosch Make |
| 69 | Angle Grinder of Bosch Make |
| 70 | PVC Mallet with fiberglass Handle |
